Hi,
I'm also having this issue. The output of dmesg:
138.288033] usb 2-10: new high speed USB device using ehci_hcd and address 17 [ 138.581980] usb 2-10: configuration #1 chosen from 1 choice [ 138.851273] phy10: Selected rate control algorithm 'pid' [ 138.860059] Registered led device: rt73usb-phy10:radio [ 138.860187] Registered led device: rt73usb-phy10:assoc [ 138.860269] Registered led device: rt73usb-phy10:quality [ 142.908455] firmware: requesting rt73.bin [ 143.002097] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 149.372753] usb 2-10: USB disconnect, address 17 [ 149.384792] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19. [ 149.384819] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19. [ 149.384829] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19. [ 149.384837] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19. [ 149.384845] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19. [ 149.384904] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 149.388624] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 149.388710] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 149.388773] phy10 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 149.800055] usb 2-10: new high speed USB device using ehci_hcd and address 18 [ 150.095898] usb 2-10: configuration #1 chosen from 1 choice [ 150.367588] phy11: Selected rate control algorithm 'pid' [ 150.369743] Registered led device: rt73usb-phy11:radio [ 150.369785] Registered led device: rt73usb-phy11:assoc [ 150.369827] Registered led device: rt73usb-phy11:quality [ 154.420685] firmware: requesting rt73.bin [ 154.509224] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 161.020421] usb 2-10: USB disconnect, address 18 [ 161.025345] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19. [ 161.025360] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19. [ 161.025369] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19. [ 161.025376] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19. [ 161.025384] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19. [ 161.025432] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 161.025632] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 161.025686] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 161.025750] phy11 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. [ 161.424534] usb 2-10: new high speed USB device using ehci_hcd and address 19 [ 161.719986] usb 2-10: configuration #1 chosen from 1 choice [ 161.985886] phy12: Selected rate control algorithm 'pid' [ 161.987607] Registered led device: rt73usb-phy12:radio [ 161.987652] Registered led device: rt73usb-phy12:assoc [ 161.987692] Registered led device: rt73usb-phy12:quality [ 166.060469] firmware: requesting rt73.bin [ 166.148908] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 182.479490] type=1503 audit(1225956827.624:6): operation="inode_permission" requested_mask="r::" denied_mask="r::" fsuid=7 name="/proc/8016/net/" pid=8016 profile="/usr/sbin/cupsd" [ 182.483251] type=1503 audit(1225956827.628:7): operation="socket_create" family="ax25" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484140] type=1503 audit(1225956827.632:8): operation="socket_create" family="netrom" sock_type="seqpacket" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484158] type=1503 audit(1225956827.632:9): operation="socket_create" family="rose" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484172] type=1503 audit(1225956827.632:10): operation="socket_create" family="ipx" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484186] type=1503 audit(1225956827.632:11): operation="socket_create" family="appletalk" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484199] type=1503 audit(1225956827.632:12): operation="socket_create" family="econet" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484212] type=1503 audit(1225956827.632:13): operation="socket_create" family="ash" sock_type="dgram" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484225] type=1503 audit(1225956827.632:14): operation="socket_create" family="x25" sock_type="seqpacket" protocol=0 pid=8016 profile="/usr/sbin/cupsd" [ 182.484348] type=1503 audit(1225956827.632:15): operation="inode_permission" requested_mask="::r" denied_mask="::r" fsuid=7 name="/proc/8016/net/dev" pid=8016 profile="/usr/sbin/cupsd"
I tried blacklisting it and installing from source following this thread but unsuccessfully.
http://tennessee.ubuntuforums.com/showthread.php?s=d7f83044800d52bc276869d2d6ee7fa2&t=934055
Hi,
I'm also having this issue. The output of dmesg:
138.288033] usb 2-10: new high speed USB device using ehci_hcd and address 17 phy10:quality NETDEV_ UP): wlan0: link is not ready vendor_ request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19. vendor_ request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19. vendor_ request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19. vendor_ request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19. vendor_ request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. phy11:quality NETDEV_ UP): wlan0: link is not ready vendor_ request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19. vendor_ request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19. vendor_ request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19. vendor_ request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19. vendor_ request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. vendor_ request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19. phy12:quality NETDEV_ UP): wlan0: link is not ready 7.624:6) : operation= "inode_ permission" requested_ mask="r: :" denied_mask="r::" fsuid=7 name="/ proc/8016/ net/" pid=8016 profile= "/usr/sbin/ cupsd" 7.628:7) : operation= "socket_ create" family="ax25" sock_type="dgram" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:8) : operation= "socket_ create" family="netrom" sock_type= "seqpacket" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:9) : operation= "socket_ create" family="rose" sock_type="dgram" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:10) : operation= "socket_ create" family="ipx" sock_type="dgram" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:11) : operation= "socket_ create" family="appletalk" sock_type="dgram" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:12) : operation= "socket_ create" family="econet" sock_type="dgram" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:13) : operation= "socket_ create" family="ash" sock_type="dgram" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:14) : operation= "socket_ create" family="x25" sock_type= "seqpacket" protocol=0 pid=8016 profile= "/usr/sbin/ cupsd" 7.632:15) : operation= "inode_ permission" requested_ mask=": :r" denied_mask="::r" fsuid=7 name="/ proc/8016/ net/dev" pid=8016 profile= "/usr/sbin/ cupsd"
[ 138.581980] usb 2-10: configuration #1 chosen from 1 choice
[ 138.851273] phy10: Selected rate control algorithm 'pid'
[ 138.860059] Registered led device: rt73usb-phy10:radio
[ 138.860187] Registered led device: rt73usb-phy10:assoc
[ 138.860269] Registered led device: rt73usb-
[ 142.908455] firmware: requesting rt73.bin
[ 143.002097] ADDRCONF(
[ 149.372753] usb 2-10: USB disconnect, address 17
[ 149.384792] phy10 -> rt2x00usb_
[ 149.384819] phy10 -> rt2x00usb_
[ 149.384829] phy10 -> rt2x00usb_
[ 149.384837] phy10 -> rt2x00usb_
[ 149.384845] phy10 -> rt2x00usb_
[ 149.384904] phy10 -> rt2x00usb_
[ 149.388624] phy10 -> rt2x00usb_
[ 149.388710] phy10 -> rt2x00usb_
[ 149.388773] phy10 -> rt2x00usb_
[ 149.800055] usb 2-10: new high speed USB device using ehci_hcd and address 18
[ 150.095898] usb 2-10: configuration #1 chosen from 1 choice
[ 150.367588] phy11: Selected rate control algorithm 'pid'
[ 150.369743] Registered led device: rt73usb-phy11:radio
[ 150.369785] Registered led device: rt73usb-phy11:assoc
[ 150.369827] Registered led device: rt73usb-
[ 154.420685] firmware: requesting rt73.bin
[ 154.509224] ADDRCONF(
[ 161.020421] usb 2-10: USB disconnect, address 18
[ 161.025345] phy11 -> rt2x00usb_
[ 161.025360] phy11 -> rt2x00usb_
[ 161.025369] phy11 -> rt2x00usb_
[ 161.025376] phy11 -> rt2x00usb_
[ 161.025384] phy11 -> rt2x00usb_
[ 161.025432] phy11 -> rt2x00usb_
[ 161.025632] phy11 -> rt2x00usb_
[ 161.025686] phy11 -> rt2x00usb_
[ 161.025750] phy11 -> rt2x00usb_
[ 161.424534] usb 2-10: new high speed USB device using ehci_hcd and address 19
[ 161.719986] usb 2-10: configuration #1 chosen from 1 choice
[ 161.985886] phy12: Selected rate control algorithm 'pid'
[ 161.987607] Registered led device: rt73usb-phy12:radio
[ 161.987652] Registered led device: rt73usb-phy12:assoc
[ 161.987692] Registered led device: rt73usb-
[ 166.060469] firmware: requesting rt73.bin
[ 166.148908] ADDRCONF(
[ 182.479490] type=1503 audit(122595682
[ 182.483251] type=1503 audit(122595682
[ 182.484140] type=1503 audit(122595682
[ 182.484158] type=1503 audit(122595682
[ 182.484172] type=1503 audit(122595682
[ 182.484186] type=1503 audit(122595682
[ 182.484199] type=1503 audit(122595682
[ 182.484212] type=1503 audit(122595682
[ 182.484225] type=1503 audit(122595682
[ 182.484348] type=1503 audit(122595682
I tried blacklisting it and installing from source following this thread but unsuccessfully.
http:// tennessee. ubuntuforums. com/showthread. php?s=d7f830448 00d52bc276869d2 d6ee7fa2& t=934055