Comment 23 for bug 577058

If I boot the System with "GRUB_CMDLINE_LINUX_DEFAULT="quiet acpi_enforce_resources=lax", I'm able to run pwmconfig without the error message "/usr/sbin/pwmconfig: There are no pwm-capable sensor modules installed".
The fan is controlled by fancontrol even when the machine comes back from suspend.

With sensors-detect a winbond w83627hf was detected and I wrote it into /etc/modules
Now the output of sensors is:

privat@kubuntu:$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +29.0°C (crit = +100.0°C)

w83627hf-isa-0290
Adapter: ISA adapter
in0: +1.09 V (min = +0.00 V, max = +4.08 V)
in1: +2.59 V (min = +0.00 V, max = +4.08 V)
in2: +3.26 V (min = +2.82 V, max = +3.79 V)
in3: +3.04 V (min = +1.52 V, max = +2.03 V) ALARM
in4: +3.06 V (min = +3.98 V, max = +2.00 V) ALARM
in5: +1.52 V (min = +3.02 V, max = +3.52 V) ALARM
in6: +1.17 V (min = +1.95 V, max = +0.50 V) ALARM
in7: +3.28 V (min = +3.55 V, max = +4.08 V) ALARM
in8: +2.98 V (min = +2.03 V, max = +4.08 V)
fan1: 948 RPM (min = 332 RPM, div = 16)
fan2: 0 RPM (min = 332 RPM, div = 16) ALARM
fan3: 0 RPM (min = 332 RPM, div = 16) ALARM
temp1: +27.0°C (high = +93.0°C, hyst = -69.0°C) sensor = thermistor
temp2: +29.0°C (high = +50.0°C, hyst = +45.0°C) sensor = diode
temp3: +28.5°C (high = +50.0°C, hyst = +45.0°C) sensor = thermistor
cpu0_vid: +0.000 V
beep_enable:enabled