Comment 22 for bug 264881

Revision history for this message
Geek87 (geek87) wrote : Re: [Bug 264881] Re: iwl3945 not able to associate with kernel 2.6.26 and 2.6.27

I have the problem since Hardy. It's normal before that the driver
wasn't iwl3945 but ipw3945.

Le samedi 06 décembre 2008 à 19:12 +0000, Rune Evjen a écrit :
> Reloading iwl3945 module doesn't help for me.
>
> Geek87,
>
> did wireless work for you using 2.6.24-19-generic (in Hardy) ?
>
> Wireless was working fine on my computer until 2.6.24-19-generic, after this
> (in both Hardy and Intrepid) it has been completely broken. It does however
> work fine with an Zydas USB device.
>
> Davidiam,
>
> can you please check if you have the same iwl hardware as me ?
>
> modinfo iwl3945:
> filename:
> /lib/modules/2.6.27-10-generic/kernel/drivers/net/wireless/iwlwifi/iwl3945.ko
> license: GPL
> author: Copyright(c) 2003-2008 Intel Corporation
> version: 1.2.26ks
> description: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver
> for Linux
> srcversion: B8570227953474842B9209D
> alias: pci:v00008086d00004227sv*sd*bc*sc*i*
> alias: pci:v00008086d00004222sv*sd*bc*sc*i*
> alias: pci:v00008086d00004227sv*sd00001014bc*sc*i*
> alias: pci:v00008086d00004222sv*sd00001044bc*sc*i*
> alias: pci:v00008086d00004222sv*sd00001034bc*sc*i*
> alias: pci:v00008086d00004222sv*sd00001005bc*sc*i*
> depends: mac80211,led-class,cfg80211,rfkill
> vermagic: 2.6.27-10-generic SMP mod_unload modversions 586
> parm: antenna:select antenna (1=Main, 2=Aux, default 0 [both])
> (int)
> parm: disable:manually disable the radio (default 0 [radio on])
> (int)
> parm: hwcrypto:using hardware crypto engine (default 0 [software])
> (int)
> parm: debug:debug output mask (int)
> parm: disable_hw_scan:disable hardware scanning (default 0) (int)
> parm: queues_num:number of hw queues. (int)
> parm: qos_enable:enable all QoS functionality (int)
>
>
> lspci -vv (extract):
>
> 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan]
> Network Connection (rev 02)
> Subsystem: Intel Corporation Device 1011
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 64 bytes
> Interrupt: pin A routed to IRQ 220
> Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: [c8] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0+,D1-,D2-,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
> Enable+
> Address: 00000000fee0300c Data: 414a
> Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1
> unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
> Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 128 bytes
> DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr-
> TransPend-
> LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
> <128ns, L1 <64us
> ClockPM+ Suprise- LLActRep- BwNot-
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain-
> CommClk+
> ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
> BWMgmt- ABWMgmt-
> Capabilities: [100] Advanced Error Reporting <?>
> Capabilities: [140] Device Serial Number 4d-ff-ca-ff-ff-de-18-00
> Kernel driver in use: iwl3945
> Kernel modules: iwl3945
>