After loading the module b43 this is the list of added modules: +b43 +cfg80211 +input_polldev +mac80211 +rfkill +ssb
the dmesg output exactly AFTER the module load:
[ 91.085949] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 17 [ 91.085969] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 91.100919] WARNING: at /build/buildd/linux-2.6.24/drivers/ssb/main.c:883 ssb_tmslow_reject_bitmask() [ 91.100931] Pid: 6017, comm: modprobe Not tainted 2.6.24-5-generic #1 [ 91.100956] [<f8de187b>] ssb_tmslow_reject_bitmask+0x4b/0x60 [ssb] [ 91.100978] [<f8de2161>] ssb_device_is_enabled+0x11/0x40 [ssb] [ 91.100992] [<f8de42d9>] ssb_pcicore_init+0x19/0x60 [ssb] [ 91.101006] [<f8de16a3>] ssb_attach_queued_buses+0xd3/0x260 [ssb] [ 91.101022] [<f8de372f>] ssb_pci_xtal+0x17f/0x230 [ssb] [ 91.101042] [<f8de1c36>] ssb_bus_register+0x156/0x1d0 [ssb] [ 91.101056] [<f8de2f90>] ssb_pci_get_invariants+0x0/0x2c0 [ssb] [ 91.101091] [<f8de1d2a>] ssb_bus_pcibus_register+0x2a/0x60 [ssb] [ 91.101103] [<c0221324>] pci_set_master+0x54/0x60 [ 91.101118] [<f8de394c>] ssb_pcihost_probe+0x6c/0xb0 [ssb] [ 91.101133] [<c0223256>] pci_device_probe+0x56/0x80 [ 91.101143] [<c027e908>] driver_probe_device+0x88/0x190 [ 91.101152] [<c0212040>] kobject_uevent_env+0xf0/0x3d0 [ 91.101166] [<c027eb7e>] __driver_attach+0x9e/0xa0 [ 91.101176] [<c027dd3b>] bus_for_each_dev+0x3b/0x60 [ 91.101188] [<c027e786>] driver_attach+0x16/0x20 [ 91.101194] [<c027eae0>] __driver_attach+0x0/0xa0 [ 91.101201] [<c027e0ba>] bus_add_driver+0x8a/0x1e0 [ 91.101213] [<c0223406>] __pci_register_driver+0x56/0x90 [ 91.101222] [<f8bc304a>] ssb_modinit+0x4a/0x80 [ssb] [ 91.101233] [<c0146477>] blocking_notifier_call_chain+0x17/0x20 [ 91.101245] [<c01515e6>] sys_init_module+0x126/0x19c0 [ 91.101282] [<c027e2b0>] bus_register+0x0/0x230 [ 91.101299] [<c01053c2>] sysenter_past_esp+0x6b/0xa9 [ 91.101318] ======================= [ 91.101412] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0
After loading the module b43 this is the list of added modules:
+b43
+cfg80211
+input_polldev
+mac80211
+rfkill
+ssb
the dmesg output exactly AFTER the module load:
[ 91.085949] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, buildd/ linux-2. 6.24/drivers/ ssb/main. c:883 reject_ bitmask( ) reject_ bitmask+ 0x4b/0x60 [ssb] is_enabled+ 0x11/0x40 [ssb] init+0x19/ 0x60 [ssb] queued_ buses+0xd3/ 0x260 [ssb] xtal+0x17f/ 0x230 [ssb] register+ 0x156/0x1d0 [ssb] get_invariants+ 0x0/0x2c0 [ssb] pcibus_ register+ 0x2a/0x60 [ssb] master+ 0x54/0x60 probe+0x6c/ 0xb0 [ssb] probe+0x56/ 0x80 probe_device+ 0x88/0x190 uevent_ env+0xf0/ 0x3d0 attach+ 0x9e/0xa0 each_dev+ 0x3b/0x60 attach+ 0x16/0x20 attach+ 0x0/0xa0 driver+ 0x8a/0x1e0 driver+ 0x56/0x90 0x4a/0x80 [ssb] notifier_ call_chain+ 0x17/0x20 module+ 0x126/0x19c0 0x0/0x230 past_esp+ 0x6b/0xa9 ======= ======= ==
low) -> IRQ 17
[ 91.085969] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 91.100919] WARNING: at
/build/
ssb_tmslow_
[ 91.100931] Pid: 6017, comm: modprobe Not tainted 2.6.24-5-generic #1
[ 91.100956] [<f8de187b>] ssb_tmslow_
[ 91.100978] [<f8de2161>] ssb_device_
[ 91.100992] [<f8de42d9>] ssb_pcicore_
[ 91.101006] [<f8de16a3>] ssb_attach_
[ 91.101022] [<f8de372f>] ssb_pci_
[ 91.101042] [<f8de1c36>] ssb_bus_
[ 91.101056] [<f8de2f90>] ssb_pci_
[ 91.101091] [<f8de1d2a>] ssb_bus_
[ 91.101103] [<c0221324>] pci_set_
[ 91.101118] [<f8de394c>] ssb_pcihost_
[ 91.101133] [<c0223256>] pci_device_
[ 91.101143] [<c027e908>] driver_
[ 91.101152] [<c0212040>] kobject_
[ 91.101166] [<c027eb7e>] __driver_
[ 91.101176] [<c027dd3b>] bus_for_
[ 91.101188] [<c027e786>] driver_
[ 91.101194] [<c027eae0>] __driver_
[ 91.101201] [<c027e0ba>] bus_add_
[ 91.101213] [<c0223406>] __pci_register_
[ 91.101222] [<f8bc304a>] ssb_modinit+
[ 91.101233] [<c0146477>] blocking_
[ 91.101245] [<c01515e6>] sys_init_
[ 91.101282] [<c027e2b0>] bus_register+
[ 91.101299] [<c01053c2>] sysenter_
[ 91.101318] =======
[ 91.101412] ssb: Sonics Silicon Backplane found on PCI device 0000:02:00.0