Exactly the same problem here on a Debian SID system (I do know that this is a Ubuntu bug-forum. However, we are relatives, right :-))
Kernel: 2.6.24-1-amd64 #1 SMP
here´s a cut from my syslog
kernel: hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
kernel: hda: status error: error=0x00 { }
kernel: ide: failed opcode was: unknown
kernel: hda: drive not ready for command
dev/hda/
ATAPI CD-ROM, with removable media
Model Number: BENQ DVD DD DW1620
Serial Number:
Firmware Revision: B7W9
Two identical sata drives are conneted as well
dev/sda and /dev/sdb
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG HD501LJ
Serial Number: S0MUJ13P220357
Firmware Revision: CR100-10
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
At the moment I use the solution suggested by pvdeynse (hdparm -w1 /devhda).
I would be interested to know what´s causing these error messages and how to get rid of them without a drive reset after boot.
Exactly the same problem here on a Debian SID system (I do know that this is a Ubuntu bug-forum. However, we are relatives, right :-))
Kernel: 2.6.24-1-amd64 #1 SMP
here´s a cut from my syslog
kernel: hda: status error: status=0x59 { DriveReady SeekComplete DataRequest Error }
kernel: hda: status error: error=0x00 { }
kernel: ide: failed opcode was: unknown
kernel: hda: drive not ready for command
dev/hda/
ATAPI CD-ROM, with removable media
Model Number: BENQ DVD DD DW1620
Serial Number:
Firmware Revision: B7W9
Two identical sata drives are conneted as well
dev/sda and /dev/sdb
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG HD501LJ
Serial Number: S0MUJ13P220357
Firmware Revision: CR100-10
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
At the moment I use the solution suggested by pvdeynse (hdparm -w1 /devhda).
I would be interested to know what´s causing these error messages and how to get rid of them without a drive reset after boot.
cheers, cafeschintze