Comment 608 for bug 88746

Reply-To: <email address hidden>

Hi,

On Thu, 24 Jul 2008 23:15:56 -0700, Andrew Morton
<email address hidden> wrote:
>> After using any usb2.0 device I have on my machine (only on linux, as on
> winxp
>> there is no problem) for a few minutes I get this:
>> usb 6-5: reset high speed USB device using ehci_hcd and address 8
>> usb 6-5: device descriptor read/64, error -110
>> usb 6-5: device descriptor read/64, error -110
>> usb 6-5: reset high speed USB device using ehci_hcd and address 8
>> usb 6-5: device descriptor read/64, error -110
>> usb 6-5: device descriptor read/64, error -110
>> usb 6-5: reset high speed USB device using ehci_hcd and address 8
>> usb 6-5: device not accepting address 8, error -110
>> usb 6-5: reset high speed USB device using ehci_hcd and address 8
>> usb 6-5: device not accepting address 8, error -110
>> usb 6-5: USB disconnect, address 8
>> sd 4:0:0:0: Device offlined - not ready after error recovery
>> sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
>> end_request: I/O error, dev sdc, sector 530560
>> sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
>> end_request: I/O error, dev sdc, sector 530576
>> Buffer I/O error on device sdc1, logical block 138851
>> lost page write due to I/O error on sdc1
>> sd 4:0:0:0: [sdc] READ CAPACITY failed
>> sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
>> sd 4:0:0:0: [sdc] Sense not available.
>> sd 4:0:0:0: [sdc] Write Protect is off
>> sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
>> sd 4:0:0:0: [sdc] Assuming drive cache: write through
>> sd 4:0:0:0: [sdc] READ CAPACITY failed
>> sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
>> sd 4:0:0:0: [sdc] Sense not available.
>> sd 4:0:0:0: [sdc] Write Protect is off
>> sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
>> sd 4:0:0:0: [sdc] Assuming drive cache: write through
>> sd 4:0:0:2: [sde] READ CAPACITY failed
>> sd 4:0:0:2: [sde] Result: hostbyte=0x01 driverbyte=0x00
>> sd 4:0:0:2: [sde] Sense not available.
>> sd 4:0:0:2: [sde] Write Protect is off
>> sd 4:0:0:2: [sde] Mode Sense: 00 00 00 00
>> sd 4:0:0:2: [sde] Assuming drive cache: write through
>> sd 4:0:0:1: [sdd] READ CAPACITY failed
>> sd 4:0:0:1: [sdd] Result: hostbyte=0x01 driverbyte=0x00
>> sd 4:0:0:1: [sdd] Sense not available.
>> sd 4:0:0:1: [sdd] Write Protect is off
>> sd 4:0:0:1: [sdd] Mode Sense: 00 00 00 00
>> sd 4:0:0:1: [sdd] Assuming drive cache: write through
>> Buffer I/O error on device sdc1, logical block 138851
>> lost page write due to I/O error on sdc1
>> sd 4:0:0:3: [sdf] READ CAPACITY failed
>> sd 4:0:0:3: [sdf] Result: hostbyte=0x01 driverbyte=0x00
>> sd 4:0:0:3: [sdf] Sense not available.
>> sd 4:0:0:3: [sdf] Write Protect is off
>> sd 4:0:0:3: [sdf] Mode Sense: 00 00 00 00
>> sd 4:0:0:3: [sdf] Assuming drive cache: write through
>> sd 4:0:0:1: [sdd] READ CAPACITY failed
>> sd 4:0:0:1: [sdd] Result: hostbyte=0x01 driverbyte=0x00
>> sd 4:0:0:1: [sdd] Sense not available.
>> sd 4:0:0:2: [sde] READ CAPACITY failed
>> sd 4:0:0:2: [sde] Result: hostbyte=0x01 driverbyte=0x00
>> sd 4:0:0:2: [sde] Sense not available.

What were you doing with the device before it resets ?
If it was mounted and it somehow reset, it could be
even a flaky cable.

Check, also, that hald-addon-storage is probably polling
an unexistent /dev/sdX.