© 2004
Canonical Ltd.
•
Terms of use
•
Data privacy
•
Contact Launchpad Support
•
Blog
•
Careers
•
System status
•
35a32c5
(Get the code!)
I encounter almost the same problem with my two external drives:
freecom XXS (usb-powered)
Feb 26 17:15:42 lucidext kernel: [ 142.660066] usb 1-4: new high speed USB device using ehci_hcd and address 5
Feb 26 17:15:42 lucidext kernel: [ 142.811197] usb 1-4: configuration #1 chosen from 1 choice
Feb 26 17:15:42 lucidext kernel: [ 142.813797] scsi7 : SCSI emulation for USB Mass Storage devices
Feb 26 17:15:47 lucidext kernel: [ 147.810682] scsi 7:0:0:0: Direct-Access Freecom Mobile Drive XXS PQ: 0 ANSI: 2 CCS
Feb 26 17:15:47 lucidext kernel: [ 147.811440] sd 7:0:0:0: Attached scsi generic sg3 type 0
Feb 26 17:15:47 lucidext kernel: [ 147.813681] sd 7:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
Feb 26 17:15:47 lucidext kernel: [ 147.814668] sd 7:0:0:0: [sdc] Write Protect is off
Feb 26 17:15:47 lucidext kernel: [ 147.816291] sdc: sdc1 sdc2 sdc3 < sdc5 sdc6 > sdc4
Feb 26 17:15:47 lucidext kernel: [ 147.878577] sd 7:0:0:0: [sdc] Attached SCSI disk
Feb 26 17:15:55 lucidext kernel: [ 156.130089] usb 1-4: reset high speed USB device using ehci_hcd and address 5
Feb 26 17:16:04 lucidext kernel: [ 164.160059] usb 1-4: reset high speed USB device using ehci_hcd and address 5
Feb 26 17:16:10 lucidext kernel: [ 171.079267] evolution-
Feb 26 17:16:34 lucidext kernel: [ 195.132582] usb 1-4: reset high speed USB device using ehci_hcd and address 5
freecom Harddisk classic 3.5" 1 TB (external powered)
Feb 26 17:22:24 lucidext kernel: [ 544.650786] usb 1-4: new high speed USB device using ehci_hcd and address 6
Feb 26 17:22:24 lucidext kernel: [ 544.801146] usb 1-4: configuration #1 chosen from 1 choice
Feb 26 17:22:24 lucidext kernel: [ 544.803710] scsi8 : SCSI emulation for USB Mass Storage devices
Feb 26 17:22:29 lucidext kernel: [ 549.800765] scsi 8:0:0:0: Direct-Access WDC WD10 EAVS-00D7B0 PQ: 0 ANSI: 2 CCS
Feb 26 17:22:29 lucidext kernel: [ 549.801530] sd 8:0:0:0: Attached scsi generic sg3 type 0
Feb 26 17:22:29 lucidext kernel: [ 549.803756] sd 8:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
Feb 26 17:22:29 lucidext kernel: [ 549.804625] sd 8:0:0:0: [sdc] Write Protect is off
Feb 26 17:22:29 lucidext kernel: [ 549.806127] sdc: sdc1
Feb 26 17:22:29 lucidext kernel: [ 549.815866] sd 8:0:0:0: [sdc] Attached SCSI disk
Feb 26 17:22:36 lucidext kernel: [ 557.130061] usb 1-4: reset high speed USB device using ehci_hcd and address 6
Feb 26 17:22:45 lucidext kernel: [ 565.160059] usb 1-4: reset high speed USB device using ehci_hcd and address 6
Feb 26 17:23:15 lucidext kernel: [ 596.130059] usb 1-4: reset high speed USB device using ehci_hcd and address 6
I've tested these drives under Hardy and these resets doesn't accur. So this can be marked as a regression. I don't know how to do this.
For me unlike other reporters the drives also reset under karmic.
I first thought this was because the system probed for smart as this also can trigger resets but i've tried to blacklist the drive
and it didn't help. Also the above messages are taken with a full up to date lucid with the new udisk package
https:/
as i understand right it waits 30 sec before probing. I get the resets in seconds after insertion. So i think i can rule this out.
I can use my drives unlike other reporters. But i bought the freecom XXS to put lucid on it and this doesn't work. It corrups the filesystem during boot.
Sometimes i can get past the corruptions and log in in my lucid on usb. When i tried to update the system, the system freezed when installing the new acpi-support package. At the installation it disables acpi to install an this triggers a total lockup. Also i never been able to boot with the noacpi parameter at boot. Maybe this can be help find the problem udev rule?
I hope there will be a solution that fixes all the drives at once, in my search i found a lot of other people complaining about this.