0:72 = 1804 0:74 = 1001 0:76 = 2010
cat /proc/asound/card0/intel8x0 Intel8x0
Global control : 0xc0000002 Global status : 0x00700100 SDM : 0x00000008 AC'97 codecs ready : primary AC'97 codecs SDIN : 0 0 0
card*/codec97#0/ac97#?-?+regs Shows the AC97 register dump. Useful for debugging.
recompile alsa driver with CONFIG_SND_DEBUG is enabled, you can write to this file for changing an AC97 register directly.
Pass two hex numbers. For example,
# echo 02 9f1f > /proc/asound/card0/codec97#0/ac97#0-0+regs
this change master playback volume register
with headphone unplugged
set js1 mode bit of ac97 register 0x72
echo 72 1824 > /proc/asound/card0/codec97#0/ac97#0-0+regs
plug headphone
cat /proc/asound/card0/intel8x0
check bit 0 of global status is set or not
repeat the test with line out by set js0 mode
if gpi bit of global status was set after jack is plugged
we need to add a check of this bit in snd_intel8x0_interrupt and call those ad198x_handle_jp_jack
0:72 = 1804
0:74 = 1001
0:76 = 2010
cat /proc/asound/ card0/intel8x0
Intel8x0
Global control : 0xc0000002
Global status : 0x00700100
SDM : 0x00000008
AC'97 codecs ready : primary
AC'97 codecs SDIN : 0 0 0
card*/codec97# 0/ac97# ?-?+regs
Shows the AC97 register dump. Useful for debugging.
recompile alsa driver with CONFIG_SND_DEBUG is enabled, you can write to this file for
changing an AC97 register directly.
Pass two hex numbers.
For example,
# echo 02 9f1f > /proc/asound/ card0/codec97# 0/ac97# 0-0+regs
this change master playback volume register
with headphone unplugged
set js1 mode bit of ac97 register 0x72
echo 72 1824 > /proc/asound/ card0/codec97# 0/ac97# 0-0+regs
plug headphone
cat /proc/asound/ card0/intel8x0
check bit 0 of global status is set or not
repeat the test with line out by set js0 mode
if gpi bit of global status was set after jack is plugged
we need to add a check of this bit in snd_intel8x0_ interrupt and call those ad198x_ handle_ jp_jack