In my case for what I had reported in Bug #637459, the image I was trying to boot was a fresh 9/13 daily using the current linaro-media-create.
I've tried the 9/14 daily this morning on my Rev A2 BB XM and the results are the same as the 9/13 daily.
Texas Instruments X-Loader 1.4.4ss (Sep 6 2010 - 08:19:49)
Beagle xM Rev A
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2010.03-rc1 (Jun 01 2010 - 09:57:03)
OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz,
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 512 MB
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
Unrecognized expansion board: 0
Beagle xM Rev A
Die ID #505a0000061000000156166b0a026014
Hit any key to stop autoboot: 0
mmc1 is available
reading boot.scr
407 bytes read
Running bootscript from mmc ...
## Executing script at 82000000
mmc1 is available
reading uImage
3689500 bytes read
reading uInitrd
4790757 bytes read
## Booting kernel from Legacy Image at 80000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3689436 Bytes = 3.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 4790693 Bytes = 4.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-1005-linaro-omap (buildd@satinash) (gcc version 4.4.5 20100902 (prerelease) (Ubuntu)
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: OMAP3 Beagle Board
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
In my case for what I had reported in Bug #637459, the image I was trying to boot was a fresh 9/13 daily using the current linaro- media-create.
I've tried the 9/14 daily this morning on my Rev A2 BB XM and the results are the same as the 9/13 daily.
Texas Instruments X-Loader 1.4.4ss (Sep 6 2010 - 08:19:49)
Beagle xM Rev A
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2010.03-rc1 (Jun 01 2010 - 09:57:03)
OMAP3630/3730-GP ES1.0, CPU-OPP2, L3-165MHz,
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 512 MB
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment
In: serial 000156166b0a026 014
Out: serial
Err: serial
timed out in wait_for_pin: I2C_STAT=1000
I2C read: I/O error
Unrecognized expansion board: 0
Beagle xM Rev A
Die ID #505a0000061000
Hit any key to stop autoboot: 0
mmc1 is available
reading boot.scr
407 bytes read
Running bootscript from mmc ...
## Executing script at 82000000
mmc1 is available
reading uImage
3689500 bytes read
reading uInitrd
4790757 bytes read
## Booting kernel from Legacy Image at 80000000 ...
Image Name: Linux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3689436 Bytes = 3.5 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 4790693 Bytes = 4.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel. 1005-linaro- omap (buildd@satinash) (gcc version 4.4.5 20100902 (prerelease) (Ubuntu)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: OMAP3 Beagle Board
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000