I see the same as before with my Rev A2 Beagle XM with 0831-2
[ 0.000000] OMAP3 Beagle Rev: xM [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: at /build/buildd/linux-linaro-2.6.35/arch/arm/mach-omap2/serial.c:) [ 0.000000] (null): can't init uart3, no clocks available [ 0.000000] Modules linked in: [ 0.000000] [<c004a3e0>] (unwind_backtrace+0x0/0x100) from [<c050750c>] (dump_stack+0x1) [ 0.000000] [<c050750c>] (dump_stack+0x18/0x1c) from [<c0080564>] (warn_slowpath_common) [ 0.000000] [<c0080564>] (warn_slowpath_common+0x5c/0x6c) from [<c0080618>] (warn_slowp) [ 0.000000] [<c0080618>] (warn_slowpath_fmt+0x38/0x40) from [<c0010644>] (omap_serial_i) [ 0.000000] [<c0010644>] (omap_serial_init_port+0x88/0x218) from [<c0010804>] (omap_ser) [ 0.000000] [<c0010804>] (omap_serial_init+0x30/0x3c) from [<c0012460>] (omap3_beagle_i) [ 0.000000] [<c0012460>] (omap3_beagle_init+0x6c/0xfc) from [<c000c450>] (customize_mac) [ 0.000000] [<c000c450>] (customize_machine+0x24/0x2c) from [<c00423c4>] (do_one_initca) [ 0.000000] [<c00423c4>] (do_one_initcall+0x3c/0x1dc) from [<c00085b4>] (do_basic_setup) [ 0.000000] [<c00085b4>] (do_basic_setup+0x64/0x74) from [<c0008654>] (kernel_init+0x90) [ 0.000000] [<c0008654>] (kernel_init+0x90/0x120) from [<c0043b04>] (kernel_thread_exit) [ 0.000000] ---[ end trace da227214a82491b9 ]--- [ 0.000000] Found NAND on CS0
I see the same as before with my Rev A2 Beagle XM with 0831-2
[ 0.000000] OMAP3 Beagle Rev: xM buildd/ linux-linaro- 2.6.35/ arch/arm/ mach-omap2/ serial. c:) backtrace+ 0x0/0x100) from [<c050750c>] (dump_stack+0x1) 0x18/0x1c) from [<c0080564>] (warn_slowpath_ common) common+ 0x5c/0x6c) from [<c0080618>] (warn_slowp) fmt+0x38/ 0x40) from [<c0010644>] (omap_serial_i) init_port+ 0x88/0x218) from [<c0010804>] (omap_ser) init+0x30/ 0x3c) from [<c0012460>] (omap3_beagle_i) beagle_ init+0x6c/ 0xfc) from [<c000c450>] (customize_mac) machine+ 0x24/0x2c) from [<c00423c4>] (do_one_initca) initcall+ 0x3c/0x1dc) from [<c00085b4>] (do_basic_setup) setup+0x64/ 0x74) from [<c0008654>] (kernel_init+0x90) init+0x90/ 0x120) from [<c0043b04>] (kernel_ thread_ exit)
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /build/
[ 0.000000] (null): can't init uart3, no clocks available
[ 0.000000] Modules linked in:
[ 0.000000] [<c004a3e0>] (unwind_
[ 0.000000] [<c050750c>] (dump_stack+
[ 0.000000] [<c0080564>] (warn_slowpath_
[ 0.000000] [<c0080618>] (warn_slowpath_
[ 0.000000] [<c0010644>] (omap_serial_
[ 0.000000] [<c0010804>] (omap_serial_
[ 0.000000] [<c0012460>] (omap3_
[ 0.000000] [<c000c450>] (customize_
[ 0.000000] [<c00423c4>] (do_one_
[ 0.000000] [<c00085b4>] (do_basic_
[ 0.000000] [<c0008654>] (kernel_
[ 0.000000] ---[ end trace da227214a82491b9 ]---
[ 0.000000] Found NAND on CS0