Bryce Harrington wrote: > rbmorse, can you try setting: > > Section "Device" > ... > Option "AGPMode" "2" > EndSection > > Also try values 1, 4, and 8 (4 is typically the default). If one of > those settings fix it, we may be able to quirk your hardware to use that > value instead of the default. In this case please provide the following > info so we can quirk it: > > * AGPMode value(s) that work > * Make/Model of laptop or motherboard > * Output of lspci -vvnn > * Is the system all factory hardware, or have any parts been replaced? > * Is there an AGP Mode in the system BIOS? > - If so, is it set to the factory default? > > > ** Changed in: xserver-xorg-video-ati (Ubuntu) > Status: New => Incomplete > Hi Bryce. The video card is a PCI-e card and there is no AGP slot on this motherboard. Do you still want me to try adding/changing the AGPmode parameter in xorg.conf? Motherboard: Gigabyte GA-EP35-DS3R Video Card Gigabyte GV-RX387512H (ATI HD3870 - PCI-e) The system homebrew, but all settings are default. There is no AGPmode setting in BIOS. I note that editing xorg.conf to load either the "vesa" or "radeonhd" driver results in proper operation. The default video driver is the "radeon" driver, so perhaps something in the specific build of the xorg-xserver-video-ati driver used in the daily is the problem. Please let me know if I can provide any additional information. Ron Morse Output of lspci --vvnn: > 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5000] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Capabilities: > Kernel modules: intel-agp > > 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 > I/O behind bridge: 0000b000-0000bfff > Memory behind bridge: f4000000-f5ffffff > Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5004] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 4: I/O ports at e100 [size=32] > Capabilities: > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > > 00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5004] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 21 > Region 4: I/O ports at e200 [size=32] > Capabilities: > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > > 00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5004] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at e000 [size=32] > Capabilities: > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > > 00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20) > Subsystem: Giga-byte Technology Device [1458:5006] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 0: Memory at f8100000 (32-bit, non-prefetchable) [size=1K] > Capabilities: > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000a000-0000afff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > I/O behind bridge: 0000c000-0000cfff > Memory behind bridge: f8000000-f80fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: f6000000-f7ffffff > Prefetchable memory behind bridge: 00000000f8200000-00000000f82fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5004] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 4: I/O ports at e300 [size=32] > Capabilities: > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > > 00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5004] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at e400 [size=32] > Capabilities: > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > > 00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5004] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin C routed to IRQ 18 > Region 4: I/O ports at e500 [size=32] > Capabilities: > Kernel driver in use: uhci_hcd > Kernel modules: uhci-hcd > > 00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20) > Subsystem: Giga-byte Technology Device [1458:5006] > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin A routed to IRQ 23 > Region 0: Memory at f8101000 (32-bit, non-prefetchable) [size=1K] > Capabilities: > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Bus: primary=00, secondary=05, subordinate=05, sec-latency=32 > I/O behind bridge: 00009000-00009fff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: > > 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5001] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Capabilities: > Kernel modules: iTCO_wdt > > 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA AHCI Controller [8086:2922] (rev 02) (prog-if 01) > Subsystem: Giga-byte Technology Device [1458:b005] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 219 > Region 0: I/O ports at e600 [size=8] > Region 1: I/O ports at e700 [size=4] > Region 2: I/O ports at e800 [size=8] > Region 3: I/O ports at e900 [size=4] > Region 4: I/O ports at ea00 [size=32] > Region 5: Memory at f8102000 (32-bit, non-prefetchable) [size=2K] > Capabilities: > Kernel driver in use: ahci > Kernel modules: ahci > > 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) > Subsystem: Giga-byte Technology Device [1458:5001] > Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Interrupt: pin C routed to IRQ 5 > Region 0: Memory at f8103000 (64-bit, non-prefetchable) [size=256] > Region 4: I/O ports at 0500 [size=32] > Kernel modules: i2c-i801 > > 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon HD 3870 [1002:9501] > Subsystem: Giga-byte Technology Device [1458:2198] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M] > Region 2: Memory at f5000000 (64-bit, non-prefetchable) [size=64K] > Region 4: I/O ports at b000 [size=256] > [virtual] Expansion ROM at f4000000 [disabled] [size=128K] > Capabilities: > > 01:00.1 Audio device [0403]: ATI Technologies Inc Radeon HD 3870 Audio device [1002:aa18] > Subsystem: Giga-byte Technology Device [1458:aa18] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin B routed to IRQ 17 > Region 0: Memory at f5010000 (64-bit, non-prefetchable) [size=16K] > Capabilities: > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > > 03:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 01) > Subsystem: Giga-byte Technology Device [1458:b000] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 19 > Region 5: Memory at f8000000 (32-bit, non-prefetchable) [size=8K] > Capabilities: > Kernel driver in use: ahci > Kernel modules: ahci > > 03:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO]) > Subsystem: Giga-byte Technology Device [1458:b000] > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0 > Interrupt: pin B routed to IRQ 16 > Region 0: I/O ports at c000 [size=8] > Region 1: I/O ports at c100 [size=4] > Region 2: I/O ports at c200 [size=8] > Region 3: I/O ports at c300 [size=4] > Region 4: I/O ports at c400 [size=16] > Capabilities: > Kernel driver in use: pata_jmicron > Kernel modules: pata_jmicron > > 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01) > Subsystem: Giga-byte Technology Device [1458:e000] > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Latency: 0, Cache Line Size: 32 bytes > Interrupt: pin A routed to IRQ 218 > Region 0: I/O ports at d000 [size=256] > Region 2: Memory at f7000000 (64-bit, non-prefetchable) [size=4K] > [virtual] Expansion ROM at f8200000 [disabled] [size=128K] > Capabilities: > Kernel driver in use: r8169 > Kernel modules: r8169