Hi, I'm having the same problems with my usb adapter. It's a LogiLink WL0025. After blacklisting rt2500usb and rt2x00usb the stick is able to connect to a WPA-PSK-Network by using the roaming mode and the proper key. Unfortunately the connection isn't very stable. It's possible to send ping requests to another network device but if I try to open a website in firefox (e.g. google.com) the page won't be loaded correctly. The connection fails during the webserver is transmitting the site. I hope I can help you to solve that problem. Info: NetworkManager is in use. lsusb: Bus 002 Device 001: ID 0000:0000 Bus 001 Device 003: ID 148f:2573 Ralink Technology, Corp. Bus 001 Device 002: ID 062a:0000 Creative Labs Optical Mouse Bus 001 Device 001: ID 0000:0000 lsmod: Module Size Used by af_packet 24840 4 ipv6 274020 8 sis 8576 2 drm 83348 3 sis ppdev 10244 0 speedstep_lib 6404 0 cpufreq_stats 7232 0 cpufreq_conservative 8072 0 cpufreq_powersave 2688 0 cpufreq_ondemand 9612 0 freq_table 5792 2 cpufreq_stats,cpufreq_ondemand cpufreq_userspace 5280 0 ac 6148 0 sbs 19592 0 button 8976 0 container 5504 0 video 18060 0 dock 10656 0 battery 11012 0 lp 12580 0 arc4 2944 2 ecb 4608 2 blkcipher 7684 1 ecb snd_trident 44548 1 gameport 16776 2 snd_trident snd_ac97_codec 100644 1 snd_trident ac97_bus 3200 1 snd_ac97_codec snd_pcm_oss 44672 0 snd_mixer_oss 17664 1 snd_pcm_oss rc80211_simple 6912 1 snd_pcm 80388 3 snd_trident,snd_ac97_codec,snd_pcm_oss snd_page_alloc 10888 2 snd_trident,snd_pcm snd_util_mem 5760 1 snd_trident snd_mpu401_uart 9600 1 snd_trident snd_seq_dummy 4740 0 snd_seq_oss 33152 0 rt73usb 25344 0 rt2x00usb 12032 1 rt73usb rt2x00lib 19712 2 rt73usb,rt2x00usb rfkill 8208 1 rt2x00lib mac80211 171016 3 rc80211_simple,rt2x00usb,rt2x00lib cfg80211 7304 1 mac80211 parport_pc 37412 1 parport 37448 3 ppdev,lp,parport_pc pcspkr 4224 0 input_polldev 5896 1 rt2x00lib snd_seq_midi 9600 0 snd_rawmidi 25728 2 snd_mpu401_uart,snd_seq_midi snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi crc_itu_t 3072 1 rt2x00lib snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24324 2 snd_pcm,snd_seq snd_seq_device 9228 6 snd_trident,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq snd 54660 13 snd_trident,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device shpchp 34580 0 pci_hotplug 32704 1 shpchp soundcore 8800 1 snd sis_agp 10116 1 agpgart 35016 2 drm,sis_agp i2c_sis630 8332 0 i2c_core 26112 1 i2c_sis630 evdev 11136 5 usbhid 29536 0 hid 28928 1 usbhid ext3 133768 1 jbd 60456 1 ext3 mbcache 9732 1 ext3 8139cp 25088 0 sg 36764 0 sr_mod 17828 0 cdrom 37536 1 sr_mod sd_mod 30336 3 ata_generic 8452 0 floppy 60004 0 8139too 27776 0 mii 6528 2 8139cp,8139too ohci_hcd 22916 0 usbcore 138248 5 rt73usb,rt2x00usb,usbhid,ohci_hcd pata_sis 15236 2 libata 124528 2 ata_generic,pata_sis scsi_mod 147084 4 sg,sr_mod,sd_mod,libata thermal 14344 0 processor 31944 1 thermal fan 5764 0 fuse 47124 1 apparmor 40600 0 commoncap 8320 1 apparmor blacklist: (standard +...) blacklist rt2500usb blacklist rt2x00usb dmesg: [ 0.000000] Linux version 2.6.22-12-generic (buildd@vernadsky) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Sun Sep 23 18:11:30 GMT 2007 (Ubuntu 2.6.22-12.39-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000dff0000 (usable) [ 0.000000] BIOS-e820: 000000000dff0000 - 000000000dffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000000dffffc0 - 000000000e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 223MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 57328) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 57328 [ 0.000000] HighMem 57328 -> 57328 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 57328 [ 0.000000] On node 0 totalpages: 57328 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 415 pages used for memmap [ 0.000000] Normal zone: 52817 pages, LIFO batch:15 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000E4010, 0014 (r0 OID_00) [ 0.000000] ACPI: RSDT 0DFFFBD0, 002C (r1 OID_00 RSDT_000 30303030 �& 10000) [ 0.000000] ACPI: FACP 0DFFFB20, 0074 (r1 INSYDE FACP_000 100 �& 10000) [ 0.000000] ACPI: DSDT 0DFFC680, 3498 (r1 SiS630 OEM 1001 MSFT 100000B) [ 0.000000] ACPI: FACS 0DFFFFC0, 0040 [ 0.000000] ACPI: BOOT 0DFFFBA0, 0026 (r1 INSYDE ISC_BOOT 100 �& 10000) [ 0.000000] ACPI: BIOS age (1999) fails cutoff (2000), acpi=force is required to enable ACPI [ 0.000000] ACPI: acpi=force override [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0e000000:f1fc0000) [ 0.000000] Built 1 zonelists. Total pages: 56881 [ 0.000000] Kernel command line: root=UUID=5b2d0643-43c6-44e1-85ea-206b540f8191 ro quiet acpi=force noapic nplapic [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (011cc000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes) [ 0.000000] Detected 997.569 MHz processor. [ 2276.885269] Console: colour VGA+ 80x25 [ 2276.886149] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 2276.886967] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 2276.924284] Memory: 215820k/229312k available (2017k kernel code, 12940k reserved, 918k data, 364k init, 0k highmem) [ 2276.924311] virtual kernel memory layout: [ 2276.924313] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 2276.924317] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 2276.924320] vmalloc : 0xce800000 - 0xff7fe000 ( 783 MB) [ 2276.924323] lowmem : 0xc0000000 - 0xcdff0000 ( 223 MB) [ 2276.924326] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 2276.924329] .data : 0xc02f8456 - 0xc03ddea4 ( 918 kB) [ 2276.924332] .text : 0xc0100000 - 0xc02f8456 (2017 kB) [ 2276.924341] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 2276.924463] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 2277.004464] Calibrating delay using timer specific routine.. 1996.29 BogoMIPS (lpj=3992588) [ 2277.004552] Security Framework v1.0.0 initialized [ 2277.004584] SELinux: Disabled at boot. [ 2277.004624] Mount-cache hash table entries: 512 [ 2277.005050] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 2277.005078] CPU: L1 I cache: 16K, L1 D cache: 16K [ 2277.005085] CPU: L2 cache: 256K [ 2277.005096] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 2277.005126] Compat vDSO mapped to ffffe000. [ 2277.005178] Checking 'hlt' instruction... OK. [ 2277.020798] SMP alternatives: switching to UP code [ 2277.021395] Freeing SMP alternatives: 11k freed [ 2277.022325] Early unpacking initramfs... done [ 2277.859902] ACPI: Core revision 20070126 [ 2277.860486] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 2277.863206] ACPI: setting ELCR to 0200 (from 0c20) [ 2277.871243] CPU0: Intel Pentium III (Coppermine) stepping 06 [ 2277.871268] SMP motherboard not detected. [ 2277.871276] Local APIC not detected. Using dummy APIC emulation. [ 2277.871445] Brought up 1 CPUs [ 2277.871998] Booting paravirtualized kernel on bare hardware [ 2277.872268] Time: 20:35:31 Date: 09/02/107 [ 2277.872400] NET: Registered protocol family 16 [ 2277.872898] EISA bus registered [ 2277.872941] ACPI: bus type pci registered [ 2277.873277] PCI: PCI BIOS revision 2.10 entry at 0xeb290, last bus=1 [ 2277.873283] PCI: Using configuration type 1 [ 2277.873288] Setting up standard PCI resources [ 2277.877322] ACPI: EC: Look up EC in DSDT [ 2277.877829] ACPI: EC: GPE=0x1b, ports=0x66, 0x62 [ 2277.879510] ACPI: Interpreter enabled [ 2277.879520] ACPI: (supports S0 S1 S4 S5) [ 2277.879559] ACPI: Using PIC for interrupt routing [ 2277.889163] ACPI: EC: GPE=0x1b, ports=0x66, 0x62 [ 2277.889318] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 2277.889337] PCI: Probing PCI hardware (bus 00) [ 2277.890141] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 2277.897377] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 10 11) *0, disabled. [ 2277.897618] ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11) [ 2277.897867] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11) [ 2277.898093] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) [ 2277.898349] Linux Plug and Play Support v0.97 (c) Adam Belay [ 2277.898388] pnp: PnP ACPI init [ 2277.898428] ACPI: bus type pnp registered [ 2277.899219] PCI: setting IRQ 12 as level-triggered [ 2277.899359] PCI: setting IRQ 1 as level-triggered [ 2277.899511] PCI: setting IRQ 8 as level-triggered [ 2277.900478] PCI: setting IRQ 13 as level-triggered [ 2277.902746] pnp: PnP ACPI: found 11 devices [ 2277.902755] ACPI: ACPI bus type pnp unregistered [ 2277.902769] PnPBIOS: Disabled by ACPI PNP [ 2277.903011] PCI: Using ACPI for IRQ routing [ 2277.903020] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 2277.904089] NET: Registered protocol family 8 [ 2277.904095] NET: Registered protocol family 20 [ 2277.904429] pnp: 00:05: iomem range 0x0-0x9ffff could not be reserved [ 2277.904437] pnp: 00:05: iomem range 0xcc000-0xcffff could not be reserved [ 2277.904444] pnp: 00:05: iomem range 0xe0000-0xfffff could not be reserved [ 2277.904450] pnp: 00:05: iomem range 0x100000-0xdffffff could not be reserved [ 2277.904469] pnp: 00:07: ioport range 0x481-0x481 has been reserved [ 2277.904475] pnp: 00:07: ioport range 0x483-0x483 has been reserved [ 2277.904481] pnp: 00:07: ioport range 0x48f-0x48f has been reserved [ 2277.904488] pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 2277.904494] pnp: 00:07: ioport range 0x1000-0x107f has been reserved [ 2277.904501] pnp: 00:07: ioport range 0x1080-0x10ff has been reserved [ 2277.908033] Time: tsc clocksource has been installed. [ 2277.935296] PCI: Bridge: 0000:00:02.0 [ 2277.935302] IO window: a000-afff [ 2277.935312] MEM window: 50000000-560fffff [ 2277.935320] PREFETCH window: 40000000-4f0fffff [ 2277.935349] PCI: Setting latency timer of device 0000:00:02.0 to 64 [ 2277.935397] NET: Registered protocol family 2 [ 2277.972228] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 2277.972404] TCP established hash table entries: 8192 (order: 4, 98304 bytes) [ 2277.972933] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 2277.973338] TCP: Hash tables configured (established 8192 bind 8192) [ 2277.973347] TCP reno registered [ 2277.984457] checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 [ 2278.578901] it is [ 2279.494777] Freeing initrd memory: 7066k freed [ 2279.495506] Simple Boot Flag at 0x37 set to 0x1 [ 2279.496305] audit: initializing netlink socket (disabled) [ 2279.496372] audit(1191357332.484:1): initialized [ 2279.503029] VFS: Disk quotas dquot_6.5.1 [ 2279.503427] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2279.503908] io scheduler noop registered [ 2279.503916] io scheduler anticipatory registered [ 2279.503922] io scheduler deadline registered [ 2279.504000] io scheduler cfq registered (default) [ 2279.504106] Boot video device is 0000:01:00.0 [ 2279.504820] isapnp: Scanning for PnP cards... [ 2279.858215] isapnp: No Plug & Play device found [ 2279.967779] Real Time Clock Driver v1.12ac [ 2279.968013] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2279.971318] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 2279.971337] PCI: setting IRQ 11 as level-triggered [ 2279.971345] ACPI: PCI Interrupt 0000:00:01.6[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 2279.971372] ACPI: PCI interrupt for device 0000:00:01.6 disabled [ 2279.973136] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 2279.973975] input: Macintosh mouse button emulation as /class/input/input0 [ 2279.974255] PNP: PS/2 Controller [PNP0303:KBC,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2280.227142] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2280.227546] mice: PS/2 mouse device common for all mice [ 2280.227931] EISA: Probing bus 0 at eisa.0 [ 2280.227956] Cannot allocate resource for EISA slot 1 [ 2280.227968] Cannot allocate resource for EISA slot 3 [ 2280.227992] EISA: Detected 0 cards. [ 2280.228342] TCP cubic registered [ 2280.228413] NET: Registered protocol family 1 [ 2280.228534] Using IPI No-Shortcut mode [ 2280.229110] Magic number: 11:325:598 [ 2280.229301] hash matches device ptyd2 [ 2280.232130] Freeing unused kernel memory: 364k freed [ 2280.233823] input: AT Translated Set 2 keyboard as /class/input/input1 [ 2280.855841] AppArmor: AppArmor initialized<5>audit(1191357333.484:2): type=1505 info="AppArmor initialized" pid=1141 [ 2280.884348] fuse init (API version 7.8) [ 2280.902519] Failure registering capabilities with primary security module. [ 2280.947428] ACPI: CPU0 (power states: C1[C1] C2[C2]) [ 2280.947446] ACPI: Processor [CPU0] (supports 8 throttling states) [ 2283.119894] SCSI subsystem initialized [ 2283.142255] libata version 2.21 loaded. [ 2283.148728] pata_sis 0000:00:00.1: version 0.5.1 [ 2283.148792] ACPI: Unable to derive IRQ for device 0000:00:00.1 [ 2283.148798] ACPI: PCI Interrupt 0000:00:00.1[A]: no GSI [ 2283.149342] scsi0 : pata_sis [ 2283.149481] scsi1 : pata_sis [ 2283.149737] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011100 irq 14 [ 2283.149745] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011108 irq 15 [ 2283.231054] usbcore: registered new interface driver usbfs [ 2283.231151] usbcore: registered new interface driver hub [ 2283.231233] usbcore: registered new device driver usb [ 2283.235251] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2283.313687] ata1.00: ATA-6: TOSHIBA MK4032GAX, AD101A, max UDMA/100 [ 2283.313707] ata1.00: 78140160 sectors, multi 16: LBA48 [ 2283.313742] ata1.00: limited to UDMA/33 due to 40-wire cable [ 2283.321558] ata1.00: configured for UDMA/33 [ 2283.436728] 8139too Fast Ethernet driver 0.9.28 [ 2283.717748] Floppy drive(s): fd0 is 1.44M [ 2283.753259] ata2.00: ATAPI: QSI DVD-ROM SDR-081, EXA7, max UDMA/33 [ 2283.770635] FDC 0 is a National Semiconductor PC87306 [ 2283.925115] ata2.00: configured for UDMA/33 [ 2283.927162] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK4032GA AD10 PQ: 0 ANSI: 5 [ 2283.928461] scsi 1:0:0:0: CD-ROM QSI DVD-ROM SDR-081 EXA7 PQ: 0 ANSI: 5 [ 2283.937096] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 2283.937110] PCI: setting IRQ 10 as level-triggered [ 2283.937116] ACPI: PCI Interrupt 0000:00:01.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 2283.937157] ohci_hcd 0000:00:01.2: OHCI Host Controller [ 2283.937590] ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1 [ 2283.937644] ohci_hcd 0000:00:01.2: irq 10, io mem 0x34001000 [ 2283.995343] usb usb1: configuration #1 chosen from 1 choice [ 2283.995441] hub 1-0:1.0: USB hub found [ 2283.995482] hub 1-0:1.0: 3 ports detected [ 2284.002327] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 2284.002495] sd 0:0:0:0: [sda] Write Protect is off [ 2284.002502] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2284.002545] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2284.002771] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 2284.002792] sd 0:0:0:0: [sda] Write Protect is off [ 2284.002798] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2284.002831] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2284.002839] sda:Marking TSC unstable due to: possible TSC halt in C2. [ 7.100000] Time: acpi_pm clocksource has been installed. [ 7.112000] sda1 sda2 < sda5 > [ 7.140000] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.156000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.160000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 7.172000] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray [ 7.172000] Uniform CD-ROM driver Revision: 3.20 [ 7.172000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 7.180000] ACPI: PCI Interrupt 0000:00:01.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10 [ 7.180000] ohci_hcd 0000:00:01.3: OHCI Host Controller [ 7.180000] ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2 [ 7.180000] ohci_hcd 0000:00:01.3: irq 10, io mem 0x34002000 [ 7.236000] usb usb2: configuration #1 chosen from 1 choice [ 7.240000] hub 2-0:1.0: USB hub found [ 7.240000] hub 2-0:1.0: 3 ports detected [ 7.344000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 7.344000] eth0: RealTek RTL8139 at 0xce816000, 00:e0:dd:39:0e:8a, IRQ 11 [ 7.344000] eth0: Identified 8139 chip type 'RTL-8139C' [ 7.360000] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 7.484000] usb 1-1: new low speed USB device using ohci_hcd and address 2 [ 7.656000] Attempting manual resume [ 7.656000] swsusp: Resume From Partition 8:5 [ 7.656000] PM: Checking swsusp image. [ 7.656000] PM: Resume from disk failed. [ 7.688000] usb 1-1: configuration #1 chosen from 1 choice [ 7.804000] kjournald starting. Commit interval 5 seconds [ 7.804000] EXT3-fs: mounted filesystem with ordered data mode. [ 7.996000] usb 1-2: new full speed USB device using ohci_hcd and address 3 [ 8.348000] usb 1-2: configuration #1 chosen from 1 choice [ 8.352000] usbcore: registered new interface driver hiddev [ 8.356000] input: HID 062a:0000 as /class/input/input2 [ 8.356000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:01.2-1 [ 8.356000] usbcore: registered new interface driver usbhid [ 8.356000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 28.364000] Linux agpgart interface v0.102 (c) Dave Jones [ 28.488000] agpgart: Detected SiS chipset - id:1584 [ 28.496000] agpgart: AGP aperture is 64M @ 0x30000000 [ 28.700000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 28.848000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 30.816000] input: PC Speaker as /class/input/input3 [ 30.852000] parport_pc 00:0a: reported by Plug and Play ACPI [ 30.852000] parport0: PC-style at 0x378, irq 7 [PCSPP] [ 31.664000] ieee80211_init: failed to initialize WME (err=-17) [ 31.696000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_unregister [ 31.696000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_put [ 31.696000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_sta_info_get [ 31.696000] iwlwifi_rc80211_simple: Unknown symbol iwlwifi_ieee80211_rate_control_register [ 31.700000] wmaster0: Selected rate control algorithm 'simple' [ 31.784000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 31.784000] PCI: setting IRQ 5 as level-triggered [ 31.784000] ACPI: PCI Interrupt 0000:00:01.4[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 31.856000] usbcore: registered new interface driver rt73usb [ 32.320000] gameport: Trident 4DWave is pci0000:00:01.4/gameport0, speed 2593kHz [ 32.984000] lp0: using parport0 (interrupt-driven). [ 33.140000] Adding 650592k swap on /dev/sda5. Priority:-1 extents:1 across:650592k [ 33.504000] EXT3 FS on sda1, internal journal [ 38.044000] ACPI: Battery Slot [BAT] (battery present) [ 38.424000] No dock devices found. [ 39.000000] input: Power Button (FF) as /class/input/input4 [ 39.000000] ACPI: Power Button (FF) [PWRF] [ 39.044000] input: Lid Switch as /class/input/input5 [ 39.044000] ACPI: Lid Switch [LID] [ 39.068000] input: Power Button (CM) as /class/input/input6 [ 39.068000] ACPI: Power Button (CM) [PWRB] [ 39.080000] input: Sleep Button (CM) as /class/input/input7 [ 39.080000] ACPI: Sleep Button (CM) [SLPB] [ 39.576000] ACPI: AC Adapter [AC] (on-line) [ 42.464000] ppdev: user-space parallel port driver [ 43.120000] eth0: link down [ 44.280000] audit(1191357374.430:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4556 profile="/usr/sbin/cupsd" [ 44.892000] Failure registering capabilities with primary security module. [ 49.740000] [drm] Initialized drm 1.1.0 20060810 [ 49.764000] [drm] Initialized sis 1.3.0 20070626 on minor 0 [ 49.768000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 49.768000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 49.768000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 67.980000] NET: Registered protocol family 10 [ 67.980000] lo: Disabled Privacy Extensions [ 67.980000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 67.980000] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 80.296000] NET: Registered protocol family 17 [ 82.660000] wlan0: Initial auth_alg=0 [ 82.660000] wlan0: authenticate with AP 00:19:5b:dd:5e:5c [ 82.664000] wlan0: RX authentication from 00:19:5b:dd:5e:5c (alg=0 transaction=2 status=0) [ 82.664000] wlan0: authenticated [ 82.664000] wlan0: associate with AP 00:19:5b:dd:5e:5c [ 82.668000] wlan0: RX AssocResp from 00:19:5b:dd:5e:5c (capab=0x431 status=0 aid=1) [ 82.668000] wlan0: associated [ 82.668000] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 82.996000] wlan0: duplicate address detected! [ 92.128000] wlan0: duplicate address detected! iwconfig: lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"Neger" Mode:Managed Frequency:2.432 GHz Access Point: 00:19:5B:DD:5E:5C Retry min limit:7 RTS thr:off Fragment thr=2346 B Link Signal level=-29 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ifconfig: eth0 Protokoll:Ethernet Hardware Adresse 00:E0:DD:39:0E:8A UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:11 Basisadresse:0x6000 lo Protokoll:Lokale Schleife inet Adresse:127.0.0.1 Maske:255.0.0.0 inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:0 RX bytes:200 (200.0 b) TX bytes:200 (200.0 b) wlan0 Protokoll:Ethernet Hardware Adresse 00:0E:2E:DE:4E:FE inet Adresse:192.168.123.11 Bcast:192.168.123.255 Maske:255.255.255.0 inet6 Adresse: fe80::20e:2eff:fede:4efe/64 Gültigkeitsbereich:Verbindung UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37 errors:0 dropped:0 overruns:0 frame:0 TX packets:34 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:5694 (5.5 KB) TX bytes:5274 (5.1 KB) wmaster0 Protokoll:UNSPEC Hardware Adresse 00-0E-2E-DE-4E-FE-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 Kollisionen:0 Sendewarteschlangenlänge:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) ping 192.168.123.254: (Access Point) PING 192.168.123.254 (192.168.123.254) 56(84) bytes of data. 64 bytes from 192.168.123.254: icmp_seq=1 ttl=64 time=11.1 ms 64 bytes from 192.168.123.254: icmp_seq=2 ttl=64 time=3.00 ms 64 bytes from 192.168.123.254: icmp_seq=3 ttl=64 time=3.89 ms 64 bytes from 192.168.123.254: icmp_seq=4 ttl=64 time=3.81 ms 64 bytes from 192.168.123.254: icmp_seq=5 ttl=64 time=3.70 ms ...Aufruf des Web-Interfaces vom Access-Point.... dmesg: [ 812.908000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 813.008000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x308c with error -110. [ 813.108000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 814.208000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 814.308000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x308c with error -110. [ 814.408000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 814.508000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x30c4 with error -110. [ 814.608000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 814.708000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 814.808000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 814.908000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 815.008000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 815.008000] phy0 -> rt73usb_bbp_write: Error - PHY_CSR3 register busy. Write failed. [ 815.108000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -110. [ 815.208000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110. [ 815.308000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 815.408000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. ... [ 886.732000] phy0 -> rt73usb_rf_write: Error - PHY_CSR4 register busy. Write failed. [ 886.832000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 886.932000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 887.032000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 887.132000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 887.232000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 887.232000] phy0 -> rt73usb_rf_write: Error - PHY_CSR4 register busy. Write failed. [ 887.340000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3024 with error -110. [ 887.440000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3024 with error -110. [ 887.540000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3020 with error -110. [ 887.640000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3020 with error -110. [ 887.740000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -110. [ 887.840000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110. [ 887.940000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3050 with error -110. [ 888.040000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3050 with error -110. [ 888.140000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3064 with error -110. [ 888.240000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -110. [ 888.340000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -110. [ 888.440000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110. [ 888.596000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -110. [ 888.696000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -110. [ 888.796000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 888.896000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 888.996000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.096000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.196000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.196000] phy0 -> rt73usb_bbp_read: Error - PHY_CSR3 register busy. Read failed. [ 889.296000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.396000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.496000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.596000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.696000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with error -110. [ 889.696000] phy0 -> rt73usb_bbp_write: Error - PHY_CSR3 register busy. Write failed. [ 889.796000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 889.896000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3090 with error -110. [ 889.996000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.096000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.196000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.296000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.396000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.396000] phy0 -> rt73usb_rf_write: Error - PHY_CSR4 register busy. Write failed. [ 890.496000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.596000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.696000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.796000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.896000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 890.896000] phy0 -> rt73usb_rf_write: Error - PHY_CSR4 register busy. Write failed. [ 890.996000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.096000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.196000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.296000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.396000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.396000] phy0 -> rt73usb_rf_write: Error - PHY_CSR4 register busy. Write failed. [ 891.496000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.596000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.696000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.796000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.896000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. [ 891.896000] phy0 -> rt73usb_rf_write: Error - PHY_CSR4 register busy. Write failed. [ 891.996000] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3090 with error -110. Remark: Why are rt2500usb and rt2x00usb listed in lsmod? I blacklisted them and even rebooted the system. Thanks a lot!