Looks like the firmware version/fwcutter version issues I
mentioned/referenced in my first post.

Dmesg output attached.


On Thu, Mar 6, 2008 at 8:16 AM, Cory Flick <email address hidden> wrote:

> Thank you for the tips and suggestions, I'll do them tonight when I get
> home from work, and will reply again with my results.
>
>
>
> On Thu, Mar 6, 2008 at 8:04 AM, der_vegi <email address hidden> wrote:
>
> > Cory, what i your output of 'dmesg'? This would give an idea, if the
> > problem is the driver itself, or a problem of not loading the firmware.
> >
> > A second aproach would be to do the steps, the install script shoud do,
> > manually (steps extracted from
> > /usr/share/b43-fwcutter/install_bcm43xx_firmware.sh):
> > go to some temporary directory, for example ~/b43-temp and perform the
> > following steps:
> >
> > cd ~
> > mkdir b43-temp
> > cd b43-temp
> > wget http://downloads.openwrt.org/sources/wl_apsta-3.130.20.0.o
> > wget http://downloads.openwrt.org/sources/broadcom-wl-4.80.53.0.tar.bz2
> > sudo b43-fwcutter -w /lib/firmware wl_apsta-3.130.20.0.o
> > tar xfvj broadcom-wl-4.80.53.0.tar.bz2
> > sudo b43-fwcutter -w /lib/firmware broadcom-wl-4.80.53.0/kmod/wl_apsta.o
> > sudo chmod o+rx /lib/firmware/b43 /lib/firmware/b43legacy
> >
> > Again, output of 'dmesg' would be helpful... Good luck!
> >
> > --
> > broadcom wireless not working fresh install of hardy
> > https://bugs.launchpad.net/bugs/197819
> > You received this bug notification because you are a direct subscriber
> > of the bug.
> >
> > Status in Source Package "b43-fwcutter" in Ubuntu: New
> > Status in Source Package "jockey" in Ubuntu: New
> >
> > Bug description:
> > flick@lil-spooky:~$ cat /etc/lsb-release
> > DISTRIB_ID=Ubuntu
> > DISTRIB_RELEASE=8.04
> > DISTRIB_CODENAME=hardy
> > DISTRIB_DESCRIPTION="Ubuntu hardy (development branch)"
> > flick@lil-spooky:~$ uname -a
> > Linux lil-spooky 2.6.24-11-generic #1 SMP Fri Feb 29 21:26:31 UTC 2008
> > x86_64 GNU/Linux
> >
> > -------------------------------------------------------------------------------------------------
> > flick@lil-spooky:~$ apt-cache policy b43-fwcutter
> > b43-fwcutter:
> >  Installed: 1:008-2
> >  Candidate: 1:008-2
> >  Version table:
> >  *** 1:008-2 0
> >        500 http://us.archive.ubuntu.com hardy/universe Packages
> >        100 /var/lib/dpkg/status
> >
> > ----------------------------------------------------------------------------------------------------------------------------
> > what I expected to happen : after doing a fresh install of Hardy Alpha
> > 5, I started the Restricted Driver Manager to install the broadcom firmware
> > to get my wireless working, just like I did in Gutsy. I expected the
> > fwcutter package to download and install the correct firmware, which is what
> > happened under Gutsy. In Gutsy, the little orange light turned blue right
> > away ( my machine is an HP dv6000 series laptop ) indicating that wireless
> > is up and running.
> >
> > ------------------------------------------------------------------------------------------------------------------------------
> > what happened instead : started the Restricted Driver manager now called
> > "Hardware Drivers" under System-->Administration, clicked the checkbox for
> > the Broadcom firmware to be downloaded and installed. The Hardware Driver
> > manager told me it had downloaded and installed the firmware, however, the
> > orange light did not turn blue. I tried rebooting to see if that would make
> > a difference. It did not make a difference. No working wireless. This page :
> > http://linuxwireless.org/en/users/Drivers/b43 seems to indicate that
> > various kernel versions need not just different versions of the firmware,
> > but different versions of the fwcutter program/package itself, as well.
> > Would be great if that could be integrated into Hardy before final release.
> >
> > ----------------------------------------------------------------------------------------------------------------------------------
> >
>
>


[    0.000000] Linux version 2.6.24-11-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu1)) #1 SMP Fri Feb 29 21:26:31 UTC 2008 (Ubuntu 2.6.24-11.17-generic)
[    0.000000] Command line: root=UUID=b54d357e-4a50-4363-a0e0-3879cb691870 ro quiet splash noapic
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003df00000 (usable)
[    0.000000]  BIOS-e820: 000000003df00000 - 000000003df17000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003df17000 - 000000003df80000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003df80000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 253696) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP signature @ 0xFFFF8100000F8990 checksum 0
[    0.000000] ACPI: RSDP 000F8990, 0014 (r0 HP    )
[    0.000000] ACPI: RSDT 3DF0FB99, 0038 (r1 HP       RSDT    6040000  LTP        0)
[    0.000000] ACPI: FACP 3DF16D52, 0074 (r1 HP     MCP51M    6040000 PTL_    F4240)
[    0.000000] ACPI: DSDT 3DF0FBD1, 7181 (r1 HP       MCP51M  6040000 MSFT  100000E)
[    0.000000] ACPI: FACS 3DF17FC0, 0040
[    0.000000] ACPI: SSDT 3DF16DC6, 0182 (r1 HP     POWERNOW  6040000  LTP        1)
[    0.000000] ACPI: MCFG 3DF16F48, 003C (r1 HP       MCFG    6040000  LTP        0)
[    0.000000] ACPI: APIC 3DF16F84, 0054 (r1 HP     	 APIC    6040000  LTP        0)
[    0.000000] ACPI: BOOT 3DF16FD8, 0028 (r1     HP $SBFTBL$  6040000  LTP        1)
[    0.000000] ACPI: DMI detected: Hewlett-Packard
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] CPU has 2 num_cores
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000003df00000
[    0.000000] Entering add_active_range(0, 0, 157) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 253696) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000003df00000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      157
[    0.000000]     0:      256 ->   253696
[    0.000000] On node 0 totalpages: 253597
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1210 pages reserved
[    0.000000]   DMA zone: 2731 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 3412 pages used for memmap
[    0.000000]   DMA32 zone: 246188 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Nvidia board detected. Ignoring ACPI timer override.
[    0.000000] If you got timer trouble try acpi_use_timer_override
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[    0.000000] Using ACPI for processor (LAPIC) configuration information
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000] MPTABLE: OEM ID: nVIDIA   MPTABLE: Product ID: C51-MCP51    MPTABLE: APIC at: 0xFEE00000
[    0.000000] I/O APIC #2 at 0xFEC00000.
[    0.000000] Setting APIC routing to flat
[    0.000000] Processors: 2
[    0.000000] swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
[    0.000000] swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d2000
[    0.000000] swsusp: Registered nosave memory region: 00000000000d2000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 248919
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=b54d357e-4a50-4363-a0e0-3879cb691870 ro quiet splash noapic
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[   14.220292] Marking TSC unstable due to TSCs unsynchronized
[   14.220295] time.c: Detected 1607.309 MHz processor.
[   14.223831] Console: colour VGA+ 80x25
[   14.223835] console [tty0] enabled
[   14.223854] Checking aperture...
[   14.223857] CPU 0: aperture @ e378000000 size 32 MB
[   14.223860] Aperture too small (32 MB)
[   14.231301] No AGP bridge found
[   14.243161] Memory: 988088k/1014784k available (2465k kernel code, 26300k reserved, 1310k data, 316k init)
[   14.243196] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   14.322270] Calibrating delay using timer specific routine.. 3217.72 BogoMIPS (lpj=6435450)
[   14.322306] Security Framework initialized
[   14.322312] SELinux:  Disabled at boot.
[   14.322327] AppArmor: AppArmor initialized
[   14.322331] Failure registering capabilities with primary security module.
[   14.322438] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   14.323245] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[   14.323622] Mount-cache hash table entries: 256
[   14.323763] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   14.323766] CPU: L2 Cache: 256K (64 bytes/line)
[   14.323770] CPU 0/0 -> Node 0
[   14.323772] CPU: Physical Processor ID: 0
[   14.323774] CPU: Processor Core ID: 0
[   14.323799] SMP alternatives: switching to UP code
[   14.324413] Early unpacking initramfs... done
[   14.697143] ACPI: Core revision 20070126
[   14.697215] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   14.699548] ACPI: setting ELCR to 0200 (from 0ca0)
[   14.907510] Disabling APIC timer
[   14.907654] SMP alternatives: switching to SMP code
[   14.908168] Booting processor 1/2 APIC 0x1
[   14.918336] Initializing CPU#1
[   14.919654] spurious 8259A interrupt: IRQ7.
[   14.995652] Calibrating delay using timer specific routine.. 3220.91 BogoMIPS (lpj=6441825)
[   14.995659] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   14.995662] CPU: L2 Cache: 256K (64 bytes/line)
[   14.995665] CPU 1/1 -> Node 0
[   14.995666] CPU: Physical Processor ID: 0
[   14.995668] CPU: Processor Core ID: 1
[   14.995737] AMD Turion(tm) 64 X2 Mobile Technology TL-50 stepping 02
[   14.995707] Brought up 2 CPUs
[   14.995764] CPU0 attaching sched-domain:
[   14.995767]  domain 0: span 03
[   14.995770]   groups: 01 02
[   14.995773]   domain 1: span 03
[   14.995775]    groups: 03
[   14.995777] CPU1 attaching sched-domain:
[   14.995779]  domain 0: span 03
[   14.995781]   groups: 02 01
[   14.995784]   domain 1: span 03
[   14.995785]    groups: 03
[   14.996061] net_namespace: 120 bytes
[   14.996677] Time:  2:47:18  Date: 03/07/08
[   14.996738] NET: Registered protocol family 16
[   14.996961] ACPI: bus type pci registered
[   14.997046] PCI: Using configuration type 1
[   14.998191] ACPI: EC: Look up EC in DSDT
[   15.000001] ACPI: Interpreter enabled
[   15.000005] ACPI: (supports S0 S3 S4 S5)
[   15.000022] ACPI: Using PIC for interrupt routing
[   15.000868] ACPI: EC: non-query interrupt received, switching to interrupt mode
[   15.006622] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[   15.006627] ACPI: EC: driver started in interrupt mode
[   15.006694] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   15.008164] PCI: Transparent bridge - 0000:00:10.0
[   15.008184] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   15.008298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[   15.008332] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[   15.008369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[   15.042594] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.042780] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
[   15.042960] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
[   15.043137] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.043315] ACPI: PCI Interrupt Link [LK1E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.043493] ACPI: PCI Interrupt Link [LK2E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.043723] ACPI: PCI Interrupt Link [LK3E] (IRQs 5 7 9 10 *11 14 15)
[   15.043901] ACPI: PCI Interrupt Link [LK4E] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.044083] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[   15.044262] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 *10 11 14 15)
[   15.044441] ACPI: PCI Interrupt Link [LUS0] (IRQs 5 7 9 10 *11 14 15)
[   15.044620] ACPI: PCI Interrupt Link [LUS2] (IRQs 5 *7 9 10 11 14 15)
[   15.044799] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[   15.044976] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.045155] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.045333] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.045511] ACPI: PCI Interrupt Link [LPID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[   15.045699] ACPI: PCI Interrupt Link [LTID] (IRQs *5 7 9 10 11 14 15)
[   15.045878] ACPI: PCI Interrupt Link [LSI1] (IRQs 5 7 9 *10 11 14 15)
[   15.046048] Linux Plug and Play Support v0.97 (c) Adam Belay
[   15.046084] pnp: PnP ACPI init
[   15.046095] ACPI: bus type pnp registered
[   15.048608] pnp: PnP ACPI: found 11 devices
[   15.048612] ACPI: ACPI bus type pnp unregistered
[   15.048892] PCI: Using ACPI for IRQ routing
[   15.048897] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   15.067590] NET: Registered protocol family 8
[   15.067593] NET: Registered protocol family 20
[   15.067744] AppArmor: AppArmor Filesystem Enabled
[   15.083589] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[   15.083594] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[   15.083597] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[   15.083600] system 00:00: iomem range 0x0-0x0 could not be reserved
[   15.083610] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[   15.083618] system 00:03: ioport range 0x1000-0x107f has been reserved
[   15.083621] system 00:03: ioport range 0x1080-0x10ff has been reserved
[   15.083624] system 00:03: ioport range 0x1400-0x147f has been reserved
[   15.083627] system 00:03: ioport range 0x1480-0x14ff has been reserved
[   15.083630] system 00:03: ioport range 0x1800-0x187f has been reserved
[   15.083634] system 00:03: ioport range 0x1880-0x18ff has been reserved
[   15.083637] system 00:03: ioport range 0x2000-0x203f has been reserved
[   15.083645] system 00:04: ioport range 0x360-0x361 has been reserved
[   15.083649] system 00:04: ioport range 0x380-0x383 has been reserved
[   15.083652] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[   15.084135] PCI: Bridge: 0000:00:02.0
[   15.084138]   IO window: 4000-4fff
[   15.084141]   MEM window: b3000000-b31fffff
[   15.084143]   PREFETCH window: d0000000-d01fffff
[   15.084146] PCI: Bridge: 0000:00:03.0
[   15.084148]   IO window: disabled.
[   15.084150]   MEM window: b3200000-b33fffff
[   15.084153]   PREFETCH window: disabled.
[   15.084158] PCI: Bridge: 0000:00:10.0
[   15.084159]   IO window: disabled.
[   15.084162]   MEM window: b3400000-b34fffff
[   15.084165]   PREFETCH window: disabled.
[   15.084181] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   15.084189] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   15.084198] PCI: Setting latency timer of device 0000:00:10.0 to 64
[   15.084281] NET: Registered protocol family 2
[   15.087535] Time: acpi_pm clocksource has been installed.
[   15.087656] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
[   15.087552] Could not switch to high resolution mode on CPU 0
[   15.087666]  lapic is not functional.
[   15.087668] Could not switch to high resolution mode on CPU 1
[   15.131642] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[   15.132188] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[   15.133841] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   15.134606] TCP: Hash tables configured (established 131072 bind 65536)
[   15.134611] TCP reno registered
[   15.147703] checking if image is initramfs... it is
[   15.587620] Clockevents: could not switch to one-shot mode:<6>Clockevents: could not switch to one-shot mode: lapic is not functional.
[   15.587507] Could not switch to high resolution mode on CPU 0
[   15.587632]  lapic is not functional.
[   15.587634] Could not switch to high resolution mode on CPU 1
[   15.881888] Freeing initrd memory: 7409k freed
[   15.887328] Simple Boot Flag at 0x36 set to 0x1
[   15.888404] audit: initializing netlink socket (disabled)
[   15.888417] audit(1204858038.472:1): initialized
[   15.890855] VFS: Disk quotas dquot_6.5.1
[   15.890949] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   15.891100] io scheduler noop registered
[   15.891103] io scheduler anticipatory registered
[   15.891105] io scheduler deadline registered
[   15.891225] io scheduler cfq registered (default)
[   15.891242] Boot video device is 0000:00:05.0
[   16.107898] PCI: Setting latency timer of device 0000:00:02.0 to 64
[   16.107928] assign_interrupt_mode Found MSI capability
[   16.107951] Allocate Port Service[0000:00:02.0:pcie00]
[   16.108026] PCI: Setting latency timer of device 0000:00:03.0 to 64
[   16.108053] assign_interrupt_mode Found MSI capability
[   16.108072] Allocate Port Service[0000:00:03.0:pcie00]
[   16.142116] Real Time Clock Driver v1.12ac
[   16.142230] Linux agpgart interface v0.102
[   16.142233] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   16.143885] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   16.143975] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   16.144089] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[   16.160891] serio: i8042 KBD port at 0x60,0x64 irq 1
[   16.160897] serio: i8042 AUX port at 0x60,0x64 irq 12
[   16.175537] mice: PS/2 mouse device common for all mice
[   16.175585] cpuidle: using governor ladder
[   16.175587] cpuidle: using governor menu
[   16.175752] NET: Registered protocol family 1
[   16.175810] registered taskstats version 1
[   16.175975]   Magic number: 0:949:762
[   16.175979]   hash matches device serio0
[   16.176114] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[   16.176118] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   16.176121] EDD information not available.
[   16.176130] Freeing unused kernel memory: 316k freed
[   16.187027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   17.439362] fuse init (API version 7.9)
[   17.454427] ACPI: Thermal Zone [THRM] (31 C)
[   18.015760] ACPI: PCI Interrupt Link [LK1E] enabled at IRQ 11
[   18.015765] PCI: setting IRQ 11 as level-triggered
[   18.015770] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LK1E] -> GSI 11 (level, low) -> IRQ 11
[   18.015781] PCI: Setting latency timer of device 0000:03:00.0 to 64
[   18.043894] SCSI subsystem initialized
[   18.065088] ssb: SPROM revision 2 detected.
[   18.081182] usbcore: registered new interface driver usbfs
[   18.081206] usbcore: registered new interface driver hub
[   18.083392] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
[   18.087334] usbcore: registered new device driver usb
[   18.128639] libata version 3.00 loaded.
[   18.128676] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   18.129008] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 11
[   18.129012] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUS0] -> GSI 11 (level, low) -> IRQ 11
[   18.129133] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   18.129141] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[   18.129481] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[   18.129506] ohci_hcd 0000:00:0b.0: irq 11, io mem 0xb0004000
[   18.185481] usb usb1: configuration #1 chosen from 1 choice
[   18.185509] hub 1-0:1.0: USB hub found
[   18.185520] hub 1-0:1.0: 8 ports detected
[   18.287828] sata_nv 0000:00:0e.0: version 3.5
[   18.287851] PCI: Enabling device 0000:00:0e.0 (0005 -> 0007)
[   18.288140] ACPI: PCI Interrupt Link [LTID] enabled at IRQ 5
[   18.288143] PCI: setting IRQ 5 as level-triggered
[   18.288148] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LTID] -> GSI 5 (level, low) -> IRQ 5
[   18.288301] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   18.288453] scsi0 : sata_nv
[   18.288519] scsi1 : sata_nv
[   18.288692] ata1: SATA max UDMA/133 cmd 0x30c0 ctl 0x30b4 bmdma 0x3090 irq 5
[   18.288696] ata2: SATA max UDMA/133 cmd 0x30b8 ctl 0x30b0 bmdma 0x3098 irq 5
[   18.595282] usb 1-1: new low speed USB device using ohci_hcd and address 2
[   18.755271] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   18.763453] ata1.00: ATA-7: ST9100824AS, 7.24, max UDMA/100
[   18.763457] ata1.00: 195371568 sectors, multi 16: LBA48 
[   18.779455] ata1.00: configured for UDMA/100
[   18.810374] usb 1-1: configuration #1 chosen from 1 choice
[   19.092669] ata2: SATA link down (SStatus 0 SControl 300)
[   19.103453] scsi 0:0:0:0: Direct-Access     ATA      ST9100824AS      7.24 PQ: 0 ANSI: 5
[   19.104344] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 10
[   19.104350] PCI: setting IRQ 10 as level-triggered
[   19.104355] ACPI: PCI Interrupt 0000:07:05.0[A] -> Link [LNK1] -> GSI 10 (level, low) -> IRQ 10
[   19.105821] pata_amd 0000:00:0d.0: version 0.3.10
[   19.105879] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   19.127227] usb 1-4: new full speed USB device using ohci_hcd and address 3
[   19.156617] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[b3400000-b34007ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[   19.162059] scsi2 : pata_amd
[   19.162135] scsi3 : pata_amd
[   19.162827] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3080 irq 14
[   19.162831] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3088 irq 15
[   19.382289] usb 1-4: configuration #1 chosen from 1 choice
[   19.388343] usbcore: registered new interface driver hiddev
[   19.393380] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/input/input2
[   19.415279] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:0b.0-1
[   19.415302] usbcore: registered new interface driver usbhid
[   19.415307] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   19.479671] ata3.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2
[   19.651432] ata3.00: configured for MWDMA2
[   19.651475] ata4: port disabled. ignoring.
[   19.655434] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4084N KQ09 PQ: 0 ANSI: 5
[   19.656732] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   19.657046] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
[   19.657050] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ 10
[   19.657058] PCI: Setting latency timer of device 0000:00:14.0 to 64
[   20.175614] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:16:36:a1:4a:c9
[   20.175620] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
[   20.176341] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 7
[   20.176346] PCI: setting IRQ 7 as level-triggered
[   20.176351] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUS2] -> GSI 7 (level, low) -> IRQ 7
[   20.176462] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[   20.176470] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[   20.176531] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[   20.176568] ehci_hcd 0000:00:0b.1: debug port 1
[   20.176573] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[   20.176583] ehci_hcd 0000:00:0b.1: irq 7, io mem 0xb0005000
[   20.176889] usb 1-1: USB disconnect, address 2
[   20.187139] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   20.187268] usb usb2: configuration #1 chosen from 1 choice
[   20.187296] hub 2-0:1.0: USB hub found
[   20.187304] hub 2-0:1.0: 8 ports detected
[   20.302610] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   20.302617] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   20.308127] Driver 'sd' needs updating - please use bus_type methods
[   20.308232] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[   20.308248] sd 0:0:0:0: [sda] Write Protect is off
[   20.308251] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.308272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.308328] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[   20.308340] sd 0:0:0:0: [sda] Write Protect is off
[   20.308343] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   20.308363] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   20.308368]  sda: sda1 sda2 sda3
[   20.319145] usb 1-4: USB disconnect, address 3
[   20.327994] Driver 'sr' needs updating - please use bus_type methods
[   20.333314] sd 0:0:0:0: [sda] Attached SCSI disk
[   20.339203] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   20.339230] sr 2:0:0:0: Attached scsi generic sg1 type 5
[   20.355188] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   20.355195] Uniform CD-ROM driver Revision: 3.20
[   20.355259] sr 2:0:0:0: Attached scsi CD-ROM sr0
[   20.431405] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[009fc00099a9c300]
[   20.538880] Attempting manual resume
[   20.538884] swsusp: Resume From Partition 8:2
[   20.538886] PM: Checking swsusp image.
[   20.539085] PM: Resume from disk failed.
[   20.554612] EXT3-fs: INFO: recovery required on readonly filesystem.
[   20.554617] EXT3-fs: write access will be enabled during recovery.
[   20.871092] usb 2-4: new high speed USB device using ehci_hcd and address 3
[   21.013608] usb 2-4: configuration #1 chosen from 1 choice
[   21.315057] usb 1-1: new low speed USB device using ohci_hcd and address 4
[   21.528997] usb 1-1: configuration #1 chosen from 1 choice
[   21.543164] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/input/input3
[   21.575525] input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:0b.0-1
[   24.176353] kjournald starting.  Commit interval 5 seconds
[   24.176378] EXT3-fs: sda1: orphan cleanup on readonly fs
[   24.176386] ext3_orphan_cleanup: deleting unreferenced inode 1221988
[   24.176417] EXT3-fs: sda1: 1 orphan inode deleted
[   24.176419] EXT3-fs: recovery complete.
[   24.186418] EXT3-fs: mounted filesystem with ordered data mode.
[   32.842746] ip_tables: (C) 2000-2006 Netfilter Core Team
[   32.903542] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   33.606951] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   33.638385] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   33.767722] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040
[   33.767757] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000
[   33.874387] input: Power Button (FF) as /devices/virtual/input/input4
[   33.910239] ACPI: Power Button (FF) [PWRF]
[   33.910378] input: Power Button (CM) as /devices/virtual/input/input5
[   33.942247] ACPI: Power Button (CM) [PWRB]
[   33.942382] input: Sleep Button (CM) as /devices/virtual/input/input6
[   33.978226] ACPI: Sleep Button (CM) [SLPB]
[   33.978331] input: Lid Switch as /devices/virtual/input/input7
[   33.978458] ACPI: Lid Switch [LID]
[   34.010873] nvidia: module license 'NVIDIA' taints kernel.
[   34.339586] ACPI: AC Adapter [ACAD] (on-line)
[   34.858589] ACPI: Battery Slot [BAT0] (battery present)
[   34.858677] ACPI: WMI-Acer: Mapper loaded
[   34.859121] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input8
[   34.882175] ACPI: Video Device [UVGA] (multi-head: yes  rom: no  post: no)
[   34.947395] ACPI: PCI Interrupt Link [LK3E] enabled at IRQ 11
[   34.947401] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LK3E] -> GSI 11 (level, low) -> IRQ 11
[   34.947409] PCI: Setting latency timer of device 0000:00:05.0 to 64
[   34.947595] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  169.12  Thu Feb 14 17:51:09 PST 2008
[   35.326203] Linux video capture interface: v2.00
[   35.461039] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[   35.483072] usbcore: registered new interface driver uvcvideo
[   35.483078] USB Video Class driver (v0.1.0)
[   35.874087] b43-phy0: Broadcom 4311 WLAN found
[   35.918178] ricoh-mmc: Ricoh MMC Controller disabling driver
[   35.918183] ricoh-mmc: Copyright(c) Philip Langdale
[   35.951689] sdhci: Secure Digital Host Controller Interface driver
[   35.951695] sdhci: Copyright(c) Pierre Ossman
[   35.981187] phy0: Selected rate control algorithm 'simple'
[   36.074156] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   36.184959] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
[   36.184973] ricoh-mmc: Controller is now disabled.
[   36.185145] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[   36.185460] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11
[   36.185465] ACPI: PCI Interrupt 0000:07:05.1[B] -> Link [LNK2] -> GSI 11 (level, low) -> IRQ 11
[   36.185644] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[   36.185730] mmc0: SDHCI at 0xb3400800 irq 11 DMA
[   36.765718] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 9
[   36.765724] PCI: setting IRQ 9 as level-triggered
[   36.765728] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LAZA] -> GSI 9 (level, low) -> IRQ 9
[   36.765853] PCI: Setting latency timer of device 0000:00:10.1 to 64
[   36.924570] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[   36.982667] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[   37.871802] udev: renamed network interface wmaster0 to eth1
[   69.981680] lp: driver loaded but no devices found
[   70.172744] Adding 979956k swap on /dev/sda2.  Priority:-1 extents:1 across:979956k
[   70.783415] EXT3 FS on sda1, internal journal
[   82.748958] kjournald starting.  Commit interval 5 seconds
[   82.749211] EXT3 FS on sda3, internal journal
[   82.749216] EXT3-fs: mounted filesystem with ordered data mode.
[   83.814030] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[   83.831495] No dock devices found.
[   84.112080] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-50 processors (2 cpu cores) (version 2.20.00)
[   84.111950] powernow-k8:    0 : fid 0x8 (1600 MHz), vid 0x13
[   84.111955] powernow-k8:    1 : fid 0x0 (800 MHz), vid 0x1e
[   87.139640] input: b43-phy0 as /devices/virtual/input/input11
[   87.200333] NET: Registered protocol family 10
[   87.305986] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   87.305994] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[   87.306102] lo: Disabled Privacy Extensions
[   87.421223] ppdev: user-space parallel port driver
[   87.719019] audit(1204858111.180:2): operation="inode_permission" request_mask="a::" denied_mask="a::" name="/dev/tty" pid=8175 profile="/usr/sbin/cupsd" namespace="default"
[   88.080087] Bluetooth: Core ver 2.11
[   88.080563] NET: Registered protocol family 31
[   88.080567] Bluetooth: HCI device and connection manager initialized
[   88.080572] Bluetooth: HCI socket layer initialized
[   88.126299] Bluetooth: L2CAP ver 2.9
[   88.126304] Bluetooth: L2CAP socket layer initialized
[   88.174960] Bluetooth: RFCOMM socket layer initialized
[   88.174981] Bluetooth: RFCOMM TTY layer initialized
[   88.174983] Bluetooth: RFCOMM ver 1.8
[   89.119814] Clocksource tsc unstable (delta = -166030939 ns)
[   90.110409] input: b43-phy0 as /devices/virtual/input/input12
[   90.166280] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[   90.166290] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[   91.510735] NET: Registered protocol family 17
[   98.407615] eth0: no IPv6 routers present
[  100.185453] input: b43-phy0 as /devices/virtual/input/input13
[  100.227498] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  100.227506] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  101.955786] Inbound IN=eth0 OUT= MAC=00:16:36:a1:4a:c9:00:0f:35:44:68:01:08:00 SRC=24.64.8.82 DST=72.128.105.5 LEN=512 TOS=0x00 PREC=0x00 TTL=66 ID=13588 PROTO=UDP SPT=22356 DPT=1027 LEN=492 
[  101.955978] Inbound IN=eth0 OUT= MAC=00:16:36:a1:4a:c9:00:0f:35:44:68:01:08:00 SRC=24.64.8.82 DST=72.128.105.5 LEN=512 TOS=0x00 PREC=0x00 TTL=66 ID=13587 PROTO=UDP SPT=22356 DPT=1026 LEN=492 
[  101.956084] Inbound IN=eth0 OUT= MAC=00:16:36:a1:4a:c9:00:0f:35:44:68:01:08:00 SRC=24.64.8.82 DST=72.128.105.5 LEN=512 TOS=0x00 PREC=0x00 TTL=66 ID=13589 PROTO=UDP SPT=22356 DPT=1028 LEN=492 
[  108.044651] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=6678 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  109.340804] input: b43-phy0 as /devices/virtual/input/input14
[  109.382665] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  109.382673] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  118.528811] input: b43-phy0 as /devices/virtual/input/input15
[  118.570425] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  118.570433] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  127.683446] input: b43-phy0 as /devices/virtual/input/input16
[  127.723349] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  127.723357] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  136.843325] input: b43-phy0 as /devices/virtual/input/input17
[  136.890662] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  136.890670] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  149.670457] CPU0 attaching NULL sched-domain.
[  149.670467] CPU1 attaching NULL sched-domain.
[  149.684838] CPU0 attaching sched-domain:
[  149.684845]  domain 0: span 03
[  149.684847]   groups: 01 02
[  149.684851]   domain 1: span 03
[  149.684853]    groups: 03
[  149.684855] CPU1 attaching sched-domain:
[  149.684857]  domain 0: span 03
[  149.684859]   groups: 02 01
[  149.684862]   domain 1: span 03
[  149.684864]    groups: 03
[  150.383673] input: b43-phy0 as /devices/virtual/input/input18
[  150.451254] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  150.451265] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  157.652953] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=349 TOS=0x00 PREC=0x00 TTL=255 ID=6926 PROTO=UDP SPT=67 DPT=68 LEN=329 
[  167.669588] input: b43-phy0 as /devices/virtual/input/input19
[  167.711767] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  167.711775] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  174.699172] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=354 TOS=0x00 PREC=0x00 TTL=255 ID=7022 PROTO=UDP SPT=67 DPT=68 LEN=334 
[  176.932162] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=349 TOS=0x00 PREC=0x00 TTL=255 ID=7054 PROTO=UDP SPT=67 DPT=68 LEN=329 
[  176.941726] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=349 TOS=0x00 PREC=0x00 TTL=255 ID=7055 PROTO=UDP SPT=67 DPT=68 LEN=329 
[  179.587911] irq 7: nobody cared (try booting with the "irqpoll" option)
[  179.587923] Pid: 0, comm: swapper Tainted: P        2.6.24-11-generic #1
[  179.587925] 
[  179.587926] Call Trace:
[  179.587928]  <IRQ>  [<ffffffff8027ad9e>] __report_bad_irq+0x1e/0x80
[  179.587966]  [<ffffffff8027b0ad>] note_interrupt+0x2ad/0x2e0
[  179.587980]  [<ffffffff8027be63>] handle_level_irq+0xb3/0x120
[  179.587991]  [<ffffffff8020ef6b>] do_IRQ+0x7b/0x100
[  179.587994]  [<ffffffff8020b390>] default_idle+0x0/0x40
[  179.587998]  [<ffffffff8020b390>] default_idle+0x0/0x40
[  179.588001]  [<ffffffff8020c891>] ret_from_intr+0x0/0xa
[  179.588005]  <EOI>  [<ffffffff8020b3b9>] default_idle+0x29/0x40
[  179.588027]  [<ffffffff8020b43f>] cpu_idle+0x6f/0xc0
[  179.588058] 
[  179.588059] handlers:
[  179.588060] [<ffffffff880682c0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[  179.588084] Disabling IRQ #7
[  180.691100] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7090 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  206.606767] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7234 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  206.886968] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=351 TOS=0x00 PREC=0x00 TTL=255 ID=7252 PROTO=UDP SPT=67 DPT=68 LEN=331 
[  223.166075] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7337 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  223.664198] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=349 TOS=0x00 PREC=0x00 TTL=255 ID=7350 PROTO=UDP SPT=67 DPT=68 LEN=329 
[  229.931970] Inbound IN=eth0 OUT= MAC=00:16:36:a1:4a:c9:00:0f:35:44:68:01:08:00 SRC=122.136.45.47 DST=72.128.105.5 LEN=915 TOS=0x00 PREC=0x80 TTL=43 ID=0 DF PROTO=UDP SPT=60332 DPT=1027 LEN=895 
[  229.934334] Inbound IN=eth0 OUT= MAC=00:16:36:a1:4a:c9:00:0f:35:44:68:01:08:00 SRC=122.136.45.47 DST=72.128.105.5 LEN=915 TOS=0x00 PREC=0x80 TTL=43 ID=0 DF PROTO=UDP SPT=60332 DPT=1026 LEN=895 
[  237.314546] input: b43-phy0 as /devices/virtual/input/input20
[  237.365990] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  237.366000] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  262.225639] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7503 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  270.574730] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=348 TOS=0x00 PREC=0x00 TTL=255 ID=7532 PROTO=UDP SPT=67 DPT=68 LEN=328 
[  272.122796] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=347 TOS=0x00 PREC=0x00 TTL=255 ID=7544 PROTO=UDP SPT=67 DPT=68 LEN=327 
[  275.092911] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7583 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  281.430760] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=339 TOS=0x00 PREC=0x00 TTL=255 ID=7629 PROTO=UDP SPT=67 DPT=68 LEN=319 
[  283.872312] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7661 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  285.109850] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=349 TOS=0x00 PREC=0x00 TTL=255 ID=7681 PROTO=UDP SPT=67 DPT=68 LEN=329 
[  297.421964] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7751 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  298.936749] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7769 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  299.176509] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=333 TOS=0x00 PREC=0x00 TTL=255 ID=7781 PROTO=UDP SPT=67 DPT=68 LEN=313 
[  312.209963] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7842 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  323.533932] input: b43-phy0 as /devices/virtual/input/input21
[  323.612260] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found or load failed.
[  323.612269] b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 4).
[  333.616939] Inbound IN=eth0 OUT= MAC=00:16:36:a1:4a:c9:00:0f:35:44:68:01:08:00 SRC=71.76.55.67 DST=72.128.105.5 LEN=63 TOS=0x00 PREC=0x00 TTL=113 ID=3583 PROTO=UDP SPT=19007 DPT=20495 LEN=43 
[  337.652416] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=7952 PROTO=UDP SPT=67 DPT=68 LEN=310 
[  339.948668] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=349 TOS=0x00 PREC=0x00 TTL=255 ID=7984 PROTO=UDP SPT=67 DPT=68 LEN=329 
[  346.852716] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=348 TOS=0x00 PREC=0x00 TTL=255 ID=8022 PROTO=UDP SPT=67 DPT=68 LEN=328 
[  348.864930] Inbound IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:0f:35:44:68:01:08:00 SRC=76.38.64.1 DST=255.255.255.255 LEN=330 TOS=0x00 PREC=0x00 TTL=255 ID=8046 PROTO=UDP SPT=67 DPT=68 LEN=310