http://people.ubuntu.com/~smb/bug254668/linux-image-2.6.27-3-generic_2.6.27-3.3smb2_i386.deb

[    3.087260] hub 2-0:1.0: USB hub found
[    3.087330] hub 2-0:1.0: 2 ports detected
[    3.098646] SCSI subsystem initialized
[    3.122770] libata version 3.00 loaded.
(pause)
[   13.701303] Clocksource tsc unstable (delta = 4398045486566 ns)
[   13.702453] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22

[   13.702703] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[   13.702809] ehci_hcd 0000:00:02.1: debug port 1
[   13.702872] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[   13.702888] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
(pause)
[   19.272505] usb 2-1: new full speed USB device using ohci_hcd and address 2
[   22.373778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[   13.702809] ehci_hcd 0000:00:02.1: debug port 1
[   13.702872] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[   13.702888] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
[   19.272505] usb 2-1: new full speed USB device using ohci_hcd and address 2
(pause)
[   22.373778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   22.373997] usb usb3: configuration #1 chosen from 1 choice

[   22.373778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   22.373997] usb usb3: configuration #1 chosen from 1 choice
[   22.374086] hub 3-0:1.0: USB hub found
[   22.374153] hub 3-0:1.0: 7 ports detected
(pause)
[   26.063772] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
[   26.063839] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22

[   26.064012] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 4
[   26.064109] ehci_hcd 0000:00:04.1: debug port 1
[   26.064172] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[   26.064179] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
(pause)
[   29.146302] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   29.146493] usb usb4: configuration #1 chosen from 1 choice

[   29.146302] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   29.146493] usb usb4: configuration #1 chosen from 1 choice
[   29.146585] hub 4-0:1.0: USB hub found
[   29.146650] hub 4-0:1.0: 2 ports detected
(pause)
[   32.772346] usb 2-1: device not accepting address 2, error -62
[   32.810132] pata_acpi 0000:00:06.0: setting latency timer to 64

[   29.146585] hub 4-0:1.0: USB hub found
[   29.146650] hub 4-0:1.0: 2 ports detected
[   32.772346] usb 2-1: device not accepting address 2, error -62
[   32.810132] pata_acpi 0000:00:06.0: setting latency timer to 64
(pause)
[   35.679016] hub 2-0:1.0: unable to enumerate USB device on port 1
[   32.810132] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23

[   32.810132] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[   32.810132] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[   32.810132] pata_acpi 0000:00:09.0: setting latency timer to 64
[   32.810132] pata_acpi 0000:00:09.0: PCI INT A disabled
(pause)
[   35.681069] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   35.681514] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20

[   35.681069] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[   35.681514] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[   35.681585] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[   35.681662] forcedeth 0000:00:0a.0: setting latency timer to 64
(pause)
[   39.645149] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:09:25:f6
[   39.645229] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq lnktim msi desc-v3

[   39.711017] scsi0 : pata_amd
[   39.711217] scsi1 : pata_amd
[   39.711618] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[   39.711683] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
(pause)
[   43.089979] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2
[   43.090061] ata1: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)

[   39.711618] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[   39.711683] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[   43.089979] ata1.00: ATAPI: TSSTcorp CDDVDW TS-L632N, 0503, max MWDMA2
[   43.090061] ata1: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
(pause)
[   46.752316] ata1.00: configured for MWDMA2
[   46.752422] ata2: port disabled. ignoring.

[   46.756029] ata3: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484100 irq 221
[   46.756029] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 221
[   46.756029] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 221
[   46.756029] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 221
(pause)
[   50.377800] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b00964cac00]
[   53.963817] usb 4-2: new high speed USB device using ehci_hcd and address 3

[   46.756029] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 221
[   46.756029] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 221
[   46.756029] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 221
[   50.377800] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b00964cac00]
(pause)
[   53.963817] usb 4-2: new high speed USB device using ehci_hcd and address 3
[   60.767520] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[   46.756029] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 221
[   46.756029] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 221
[   50.377800] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00241b00964cac00]
[   53.963817] usb 4-2: new high speed USB device using ehci_hcd and address 3
(pause)
[   60.767520] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   60.768368] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100

[   60.768368] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[   60.768435] ata3.00: 488397168 sectors, multi 16: LBA48 
[   60.769454] ata3.00: configured for UDMA/100
[   60.785768] usb 4-2: configuration #1 chosen from 1 choice
(pause)
[   68.814693] ata4: SATA link down (SStatus 0 SControl 300)
[   77.542041] ata5: SATA link down (SStatus 0 SControl 300)

[   60.768435] ata3.00: 488397168 sectors, multi 16: LBA48 
[   60.769454] ata3.00: configured for UDMA/100
[   60.785768] usb 4-2: configuration #1 chosen from 1 choice
[   68.814693] ata4: SATA link down (SStatus 0 SControl 300)
(pause)
[   77.542041] ata5: SATA link down (SStatus 0 SControl 300)
[   77.542077] usb 2-1: new full speed USB device using ohci_hcd and address 4

[   60.785768] usb 4-2: configuration #1 chosen from 1 choice
[   68.814693] ata4: SATA link down (SStatus 0 SControl 300)
[   77.542041] ata5: SATA link down (SStatus 0 SControl 300)
[   77.542077] usb 2-1: new full speed USB device using ohci_hcd and address 4
(pause)
[   80.604751] ata6: SATA link down (SStatus 0 SControl 300)
[   80.604926] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS54252 BBFO PQ: 0 ANSI: 5

[   80.636668]  sda:<5>sd 2:0:0:0: Attached scsi generic sg1 type 0
[   80.657015] usb 2-1: configuration #1 chosen from 1 choice
[   80.708018]  sda1 sda2 sda3 < sda5 sda6 sda7 >
[   80.985022] sd 2:0:0:0: [sda] Attached SCSI disk
(pause)
[   84.512748] PM: Starting manual resume from disk
[   84.512812] PM: Resume from partition 8:5

[   84.516768] PM: Basic memory bitmaps created
[   84.561900] PM: Basic memory bitmaps freed
[   84.905877] kjournald starting.  Commit interval 5 seconds
[   84.905876] EXT3-fs: mounted filesystem with ordered data mode.
(pause)
[   99.379941] udevd version 124 started
[  100.358173] input: Power Button (FF) as /class/input/input2

[  105.480277] type=1505 audit(1220479756.759:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4243
[  105.672674] type=1505 audit(1220479756.951:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4250
[  105.672888] type=1505 audit(1220479756.951:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4250
[  105.777008] ip_tables: (C) 2000-2006 Netfilter Core Team
(pause)
[  110.150603] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 processors (2 cpu cores) (version 2.20.00)
[  110.148007] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x11

[  110.148007] powernow-k8:    0 : fid 0xc (2000 MHz), vid 0x11
[  110.148007] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x12
[  110.148007] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x13
[  110.148007] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
(pause)
[  111.306879] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[  112.577186] NET: Registered protocol family 10

[  110.148007] powernow-k8:    1 : fid 0xa (1800 MHz), vid 0x12
[  110.148007] powernow-k8:    2 : fid 0x8 (1600 MHz), vid 0x13
[  110.148007] powernow-k8:    3 : fid 0x0 (800 MHz), vid 0x1e
[  111.306879] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
(pause)
[  112.577186] NET: Registered protocol family 10
[  112.578508] lo: Disabled Privacy Extensions

[  112.577186] NET: Registered protocol family 10
[  112.578508] lo: Disabled Privacy Extensions
[  112.827185] apm: BIOS not found.
[  113.280134] ppdev: user-space parallel port driver
(pause)
[  117.285135] Bluetooth: L2CAP ver 2.10
[  117.285153] Bluetooth: L2CAP socket layer initialized

[  117.285153] Bluetooth: L2CAP socket layer initialized
[  117.325668] Bluetooth: RFCOMM socket layer initialized
[  117.325704] Bluetooth: RFCOMM TTY layer initialized
[  117.325710] Bluetooth: RFCOMM ver 1.10
(pause)
[  121.585500] eth0: no link during initialization.
[  121.586945] ADDRCONF(NETDEV_UP): eth0: link is not ready

[  122.682161] wlan0: RX AssocResp from 00:e0:98:55:95:2c (capab=0x421 status=0 aid=2)
[  122.682173] wlan0: associated
[  122.682828] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  122.683249] wlan0: disassociating by local choice (reason=3)
(pause)
[  132.952021] wlan0: no IPv6 routers present
[  200.370128] wlan0: authenticate with AP 00:e0:98:55:95:2c

[  122.682173] wlan0: associated
[  122.682828] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  122.683249] wlan0: disassociating by local choice (reason=3)
[  132.952021] wlan0: no IPv6 routers present
(pause)
[  200.370128] wlan0: authenticate with AP 00:e0:98:55:95:2c
[  200.371582] wlan0: authenticated

[  200.371582] wlan0: authenticated
[  200.371603] wlan0: associate with AP 00:e0:98:55:95:2c
[  200.374028] wlan0: RX ReassocResp from 00:e0:98:55:95:2c (capab=0x421 status=0 aid=2)
[  200.374047] wlan0: associated
(pause)
[  202.734863] RPC: Registered udp transport module.
[  202.734870] RPC: Registered tcp transport module.