0:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[23324.476205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[23324.476205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[23324.476205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[23324.476205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[23324.712779] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[23324.728275] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.694 msecs
[23324.760441] ata2: port disabled. ignoring.
[23324.760499] ata_piix 0000:00:1f.1: PCI INT A disabled
[23324.760543] HDA Intel 0000:00:1b.0: PCI INT A disabled
[23324.792088] PM: freeze of devices complete after 381.179 msecs
[23324.792569] ricoh-mmc: Suspending.
[23324.792578] ricoh-mmc: Controller is now re-enabled.
[23324.793392] PM: late freeze of devices complete after 1.301 msecs
[23324.796111] ACPI: Preparing to enter system sleep state S4
[23324.797866] PM: Saving platform NVS memory
[23324.816013] Disabling non-boot CPUs ...
[23324.816031] CPU0 attaching NULL sched-domain.
[23324.816034] CPU1 attaching NULL sched-domain.
[23324.880015] CPU0 attaching NULL sched-domain.
[23324.984031] CPU 1 is now offline
[23324.984034] SMP alternatives: switching to UP code
[23324.990082] Extended CMOS year: 2000
[23324.990181] PM: Creating hibernation image: 
[23324.992009] PM: Need to copy 126210 pages
[23324.992009] PM: Normal pages needed: 86084 + 1024, available pages: 141106
[23324.992009] PM: Restoring platform NVS memory
[23324.992009] CPU0: Thermal monitoring enabled (TM2)
[23324.992009] Extended CMOS year: 2000
[23324.992009] Enabling non-boot CPUs ...
[23324.992009] SMP alternatives: switching to SMP code
[23324.995808] Booting processor 1 APIC 0x1 ip 0x6000
[23324.989779] Initializing CPU#1
[23324.989779] CPU: L1 I cache: 32K, L1 D cache: 32K
[23324.989779] CPU: L2 cache: 4096K
[23324.989779] CPU: Physical Processor ID: 0
[23324.989779] CPU: Processor Core ID: 1
[23324.989779] CPU1: Thermal monitoring enabled (TM2)
[23325.084078] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[23325.084206] CPU0 attaching NULL sched-domain.
[23325.112016] CPU0 attaching sched-domain:
[23325.112019]  domain 0: span 0-1 level MC
[23325.112021]   groups: 0 1
[23325.112025] CPU1 attaching sched-domain:
[23325.112027]  domain 0: span 0-1 level MC
[23325.112029]   groups: 1 0
[23325.112420] CPU1 is up
[23325.112992] ACPI: Waking up from system sleep state S4
[23325.121410] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[23325.121600] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[23325.122177] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[23325.122226] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[23325.122477] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[23325.122689] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcff0000)
[23325.122944] ricoh-mmc: Resuming.
[23325.122954] ricoh-mmc: Controller is now disabled.
[23325.136022] pci 0000:03:01.4: Refused to change power state, currently in D3
[23325.136488] PM: early restore of devices complete after 15.241 msecs
[23325.207306] i915 0000:00:02.0: setting latency timer to 64
[23326.088378] PM: restore of drv:i915 dev:0000:00:02.0 complete after 881.074 msecs
[23326.088394] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[23326.088437] usb usb3: root hub lost power or was reset
[23326.088459] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[23326.088504] usb usb4: root hub lost power or was reset
[23326.088525] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[23326.088530] usb usb1: root hub lost power or was reset
[23326.092426] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[23326.092440] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[23326.092447] HDA Intel 0000:00:1b.0: setting latency timer to 64
[23326.092482] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[23326.092520] usb usb5: root hub lost power or was reset
[23326.092541] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[23326.092579] usb usb6: root hub lost power or was reset
[23326.092599] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[23326.092637] usb usb7: root hub lost power or was reset
[23326.092658] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[23326.092662] usb usb2: root hub lost power or was reset
[23326.096545] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[23326.096559] pci 0000:00:1e.0: setting latency timer to 64
[23326.096572] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[23326.096577] ata_piix 0000:00:1f.1: setting latency timer to 64
[23326.096604] ata1.00: _GTF evaluation failed (AE 0x1001)
[23326.096765] ata2: port disabled. ignoring.
[23326.096779] ahci 0000:00:1f.2: setting latency timer to 64
[23326.154241] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[23326.160255] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[23326.276527] ata1.00: configured for UDMA/33
[23326.292245] PM: restore of drv:usb dev:usb1 complete after 130.454 msecs
[23326.416237] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[23326.418303] ata3.00: configured for UDMA/133
[23326.424238] ata5: SATA link down (SStatus 0 SControl 300)
[23326.528233] PM: restore of drv:usb dev:usb2 complete after 235.965 msecs
[23326.640231] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[23326.832628] PM: restore of drv:usb dev:2-6 complete after 303.570 msecs
[23326.832649] sd 2:0:0:0: [sda] Starting disk
[23326.892794] PM: restore of devices complete after 1723.510 msecs
[23326.892983] PM: Image restored successfully.
[23326.892985] Restarting tasks ... 
[23326.893069] usb 2-1: USB disconnect, address 2
[23326.894157] done.
[23326.894169] PM: Basic memory bitmaps freed
[23333.988273] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[23334.021649] ADDRCONF(NETDEV_UP): eth0: link is not ready
[23335.779802] tg3: eth0: Link is up at 100 Mbps, full duplex.
[23335.779809] tg3: eth0: Flow control is on for TX and on for RX.
[23335.780265] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[23345.877095] eth0: no IPv6 routers present
[48814.916202] usb 3-2: new full speed USB device using uhci_hcd and address 6
[48815.093538] usb 3-2: configuration #1 chosen from 1 choice
[48815.095309] hub 3-2:1.0: USB hub found
[48815.097219] hub 3-2:1.0: 3 ports detected
[48815.377240] usb 3-2.1: new full speed USB device using uhci_hcd and address 7
[48815.506547] usb 3-2.1: configuration #1 chosen from 1 choice
[48815.586214] usb 3-2.2: new full speed USB device using uhci_hcd and address 8
[48815.717471] usb 3-2.2: configuration #1 chosen from 1 choice
[48815.727461] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input17
[48815.727637] generic-usb 0003:0A5C:4502.0003: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[48815.805179] usb 3-2.3: new full speed USB device using uhci_hcd and address 9
[48815.938351] usb 3-2.3: configuration #1 chosen from 1 choice
[48815.948300] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input18
[48815.948806] generic-usb 0003:0A5C:4503.0004: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[48816.984171] usb 3-2: USB disconnect, address 6
[48816.984180] usb 3-2.1: USB disconnect, address 7
[48816.984209] btusb_bulk_complete: hci0 urb e1823200 failed to resubmit (19)
[48816.985178] btusb_intr_complete: hci0 urb e1823180 failed to resubmit (19)
[48816.985202] btusb_bulk_complete: hci0 urb e1823c00 failed to resubmit (19)
[48816.986391] btusb_send_frame: hci0 urb e6632d00 submission failed
[48817.237223] usb 3-2.2: USB disconnect, address 8
[48817.257432] usb 3-2.3: USB disconnect, address 9
[49521.566305] rfkill switch handling already scheduled, dropping this event
[53535.068122] usb 3-2: new full speed USB device using uhci_hcd and address 10
[53535.244384] usb 3-2: configuration #1 chosen from 1 choice
[53535.247245] hub 3-2:1.0: USB hub found
[53535.249150] hub 3-2:1.0: 3 ports detected
[53535.533149] usb 3-2.1: new full speed USB device using uhci_hcd and address 11
[53535.659381] usb 3-2.1: configuration #1 chosen from 1 choice
[53535.738181] usb 3-2.2: new full speed USB device using uhci_hcd and address 12
[53535.871376] usb 3-2.2: configuration #1 chosen from 1 choice
[53535.882272] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input19
[53535.882470] generic-usb 0003:0A5C:4502.0005: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[53535.957221] usb 3-2.3: new full speed USB device using uhci_hcd and address 13
[53536.090491] usb 3-2.3: configuration #1 chosen from 1 choice
[53536.098081] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input20
[53536.098341] generic-usb 0003:0A5C:4503.0006: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[53537.416258] usb 3-2: USB disconnect, address 10
[53537.416267] usb 3-2.1: USB disconnect, address 11
[53537.417149] btusb_intr_complete: hci0 urb e3653300 failed to resubmit (19)
[53537.417181] btusb_bulk_complete: hci0 urb e4b42980 failed to resubmit (19)
[53537.418154] btusb_bulk_complete: hci0 urb e64d3f80 failed to resubmit (19)
[53537.418879] btusb_send_frame: hci0 urb e4c02900 submission failed
[53537.669608] usb 3-2.2: USB disconnect, address 12
[53537.692422] usb 3-2.3: USB disconnect, address 13
[57195.862044] rfkill switch handling already scheduled, dropping this event
[62681.045874] tg3: eth0: Link is down.
[63908.752180] usb 2-3: new high speed USB device using ehci_hcd and address 4
[63908.888175] usb 2-3: configuration #1 chosen from 3 choices
[64536.220330] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[64536.220333] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[64536.220337] PM: Basic memory bitmaps created
[64536.220338] PM: Syncing filesystems ... done.
[64536.596050] Freezing user space processes ... (elapsed 0.00 seconds) done.
[64536.596827] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[64536.596873] PM: Preallocating image memory... done (allocated 357968 pages)
[64544.549286] PM: Allocated 1431872 kbytes in 7.95 seconds (180.10 MB/s)
[64544.549288] Suspending console(s) (use no_console_suspend to debug)
[64544.596231] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[64544.646310] ACPI handle has no context!
[64544.646319] sdhci-pci 0000:03:01.1: PCI INT B disabled
[64544.646325] ACPI handle has no context!
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.684204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[64544.920769] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[64544.936275] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.695 msecs
[64544.968440] ata2: port disabled. ignoring.
[64544.968498] ata_piix 0000:00:1f.1: PCI INT A disabled
[64545.240247] HDA Intel 0000:00:1b.0: PCI INT A disabled
[64545.256229] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 287.693 msecs
[64545.265683] PM: freeze of devices complete after 716.015 msecs
[64545.266161] ricoh-mmc: Suspending.
[64545.266170] ricoh-mmc: Controller is now re-enabled.
[64545.266957] PM: late freeze of devices complete after 1.272 msecs
[64545.269593] ACPI: Preparing to enter system sleep state S4
[64545.271429] PM: Saving platform NVS memory
[64545.296012] Disabling non-boot CPUs ...
[64545.296031] CPU0 attaching NULL sched-domain.
[64545.296034] CPU1 attaching NULL sched-domain.
[64545.360015] CPU0 attaching NULL sched-domain.
[64545.464029] CPU 1 is now offline
[64545.464031] SMP alternatives: switching to UP code
[64545.470086] Extended CMOS year: 2000
[64545.470185] PM: Creating hibernation image: 
[64545.472009] PM: Need to copy 118887 pages
[64545.472009] PM: Normal pages needed: 86407 + 1024, available pages: 140783
[64545.472009] PM: Restoring platform NVS memory
[64545.472009] CPU0: Thermal monitoring enabled (TM2)
[64545.472009] Extended CMOS year: 2000
[64545.472009] Enabling non-boot CPUs ...
[64545.472009] SMP alternatives: switching to SMP code
[64545.475818] Booting processor 1 APIC 0x1 ip 0x6000
[64545.469765] Initializing CPU#1
[64545.469765] CPU: L1 I cache: 32K, L1 D cache: 32K
[64545.469765] CPU: L2 cache: 4096K
[64545.469765] CPU: Physical Processor ID: 0
[64545.469765] CPU: Processor Core ID: 1
[64545.469765] CPU1: Thermal monitoring enabled (TM2)
[64545.564079] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[64545.564134] CPU0 attaching NULL sched-domain.
[64545.592016] CPU0 attaching sched-domain:
[64545.592019]  domain 0: span 0-1 level MC
[64545.592021]   groups: 0 1
[64545.592025] CPU1 attaching sched-domain:
[64545.592027]  domain 0: span 0-1 level MC
[64545.592029]   groups: 1 0
[64545.592420] CPU1 is up
[64545.592993] ACPI: Waking up from system sleep state S4
[64545.601384] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[64545.601571] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[64545.601693] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x3030, writing 0x20003030)
[64545.602149] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[64545.602197] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[64545.602448] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[64545.602661] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcbf0000)
[64545.602915] ricoh-mmc: Resuming.
[64545.602924] ricoh-mmc: Controller is now disabled.
[64545.616022] pci 0000:03:01.4: Refused to change power state, currently in D3
[64545.616487] PM: early restore of devices complete after 15.267 msecs
[64545.686356] i915 0000:00:02.0: setting latency timer to 64
[64546.560377] PM: restore of drv:i915 dev:0000:00:02.0 complete after 874.024 msecs
[64546.560393] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[64546.560441] usb usb3: root hub lost power or was reset
[64546.560463] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[64546.560507] usb usb4: root hub lost power or was reset
[64546.560529] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[64546.560534] usb usb1: root hub lost power or was reset
[64546.564417] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[64546.564432] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[64546.564438] HDA Intel 0000:00:1b.0: setting latency timer to 64
[64546.564473] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[64546.564512] usb usb5: root hub lost power or was reset
[64546.564532] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[64546.564571] usb usb6: root hub lost power or was reset
[64546.564591] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[64546.564629] usb usb7: root hub lost power or was reset
[64546.564649] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[64546.564654] usb usb2: root hub lost power or was reset
[64546.568536] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[64546.568549] pci 0000:00:1e.0: setting latency timer to 64
[64546.568563] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[64546.568567] ata_piix 0000:00:1f.1: setting latency timer to 64
[64546.568593] ata1.00: _GTF evaluation failed (AE 0x1001)
[64546.568754] ata2: port disabled. ignoring.
[64546.568769] ahci 0000:00:1f.2: setting latency timer to 64
[64546.626238] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[64546.632252] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[64546.748524] ata1.00: configured for UDMA/33
[64546.764246] PM: restore of drv:usb dev:usb1 complete after 130.457 msecs
[64546.888234] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[64546.890267] ata3.00: configured for UDMA/133
[64546.896239] ata5: SATA link down (SStatus 0 SControl 300)
[64547.000314] PM: restore of drv:usb dev:usb2 complete after 236.045 msecs
[64547.112233] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[64547.304618] PM: restore of drv:usb dev:2-6 complete after 303.436 msecs
[64547.304640] sd 2:0:0:0: [sda] Starting disk
[64547.476233] usb 2-3: reset high speed USB device using ehci_hcd and address 4
[64547.612738] usbfs 2-3:3.1: no reset_resume for driver usbfs?
[64547.612759] PM: restore of drv:usb dev:2-3 complete after 248.268 msecs
[64547.612790] PM: restore of devices complete after 1964.874 msecs
[64547.613080] PM: Image restored successfully.
[64547.613081] Restarting tasks ... done.
[64547.614432] PM: Basic memory bitmaps freed
[64581.623277] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[64581.656340] ADDRCONF(NETDEV_UP): eth0: link is not ready
[65662.600672] usb 2-3: USB disconnect, address 4
[65662.872218] hub 2-0:1.0: unable to enumerate USB device on port 3
[66362.068223] usb 2-3: new high speed USB device using ehci_hcd and address 6
[66362.208941] usb 2-3: configuration #1 chosen from 3 choices
[95682.676980] usb 2-3: USB disconnect, address 6
[95683.861545] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[95683.861549] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[95683.861552] PM: Basic memory bitmaps created
[95683.861554] PM: Syncing filesystems ... done.
[95683.953263] Freezing user space processes ... (elapsed 0.00 seconds) done.
[95683.954048] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[95683.954096] PM: Preallocating image memory... done (allocated 358561 pages)
[95685.449354] PM: Allocated 1434244 kbytes in 1.49 seconds (962.57 MB/s)
[95685.449356] Suspending console(s) (use no_console_suspend to debug)
[95685.476400] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[95685.477483] ACPI handle has no context!
[95685.477491] sdhci-pci 0000:03:01.1: PCI INT B disabled
[95685.477497] ACPI handle has no context!
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.516204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[95685.752769] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[95685.768278] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.698 msecs
[95685.800440] ata2: port disabled. ignoring.
[95685.800497] ata_piix 0000:00:1f.1: PCI INT A disabled
[95686.072247] HDA Intel 0000:00:1b.0: PCI INT A disabled
[95686.088229] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 287.694 msecs
[95686.097674] PM: freeze of devices complete after 648.003 msecs
[95686.098144] ricoh-mmc: Suspending.
[95686.098153] ricoh-mmc: Controller is now re-enabled.
[95686.098942] PM: late freeze of devices complete after 1.265 msecs
[95686.101688] ACPI: Preparing to enter system sleep state S4
[95686.103451] PM: Saving platform NVS memory
[95686.128012] Disabling non-boot CPUs ...
[95686.128031] CPU0 attaching NULL sched-domain.
[95686.128033] CPU1 attaching NULL sched-domain.
[95686.192015] CPU0 attaching NULL sched-domain.
[95686.296028] CPU 1 is now offline
[95686.296031] SMP alternatives: switching to UP code
[95686.302061] Extended CMOS year: 2000
[95686.302159] PM: Creating hibernation image: 
[95686.304009] PM: Need to copy 126487 pages
[95686.304009] PM: Normal pages needed: 86324 + 1024, available pages: 140866
[95686.304009] PM: Restoring platform NVS memory
[95686.304009] CPU0: Thermal monitoring enabled (TM2)
[95686.304009] Extended CMOS year: 2000
[95686.304009] Enabling non-boot CPUs ...
[95686.304009] SMP alternatives: switching to SMP code
[95686.307789] Booting processor 1 APIC 0x1 ip 0x6000
[95686.301756] Initializing CPU#1
[95686.301756] CPU: L1 I cache: 32K, L1 D cache: 32K
[95686.301756] CPU: L2 cache: 4096K
[95686.301756] CPU: Physical Processor ID: 0
[95686.301756] CPU: Processor Core ID: 1
[95686.301756] CPU1: Thermal monitoring enabled (TM2)
[95686.396062] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[95686.396117] CPU0 attaching NULL sched-domain.
[95686.424016] CPU0 attaching sched-domain:
[95686.424019]  domain 0: span 0-1 level MC
[95686.424021]   groups: 0 1
[95686.424025] CPU1 attaching sched-domain:
[95686.424027]  domain 0: span 0-1 level MC
[95686.424029]   groups: 1 0
[95686.424419] CPU1 is up
[95686.424993] ACPI: Waking up from system sleep state S4
[95686.433361] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[95686.433549] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[95686.434123] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[95686.434172] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[95686.434423] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[95686.434635] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcff0000)
[95686.434890] ricoh-mmc: Resuming.
[95686.434899] ricoh-mmc: Controller is now disabled.
[95686.448021] pci 0000:03:01.4: Refused to change power state, currently in D3
[95686.448475] PM: early restore of devices complete after 15.277 msecs
[95686.519543] i915 0000:00:02.0: setting latency timer to 64
[95687.388377] PM: restore of drv:i915 dev:0000:00:02.0 complete after 868.836 msecs
[95687.388393] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[95687.388436] usb usb3: root hub lost power or was reset
[95687.388458] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[95687.388502] usb usb4: root hub lost power or was reset
[95687.388523] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[95687.388528] usb usb1: root hub lost power or was reset
[95687.392404] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[95687.392419] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[95687.392426] HDA Intel 0000:00:1b.0: setting latency timer to 64
[95687.392461] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[95687.392499] usb usb5: root hub lost power or was reset
[95687.392519] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[95687.392558] usb usb6: root hub lost power or was reset
[95687.392578] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[95687.392616] usb usb7: root hub lost power or was reset
[95687.392637] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[95687.392641] usb usb2: root hub lost power or was reset
[95687.396522] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[95687.396535] pci 0000:00:1e.0: setting latency timer to 64
[95687.396548] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[95687.396553] ata_piix 0000:00:1f.1: setting latency timer to 64
[95687.396579] ata1.00: _GTF evaluation failed (AE 0x1001)
[95687.396739] ata2: port disabled. ignoring.
[95687.396754] ahci 0000:00:1f.2: setting latency timer to 64
[95687.454239] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[95687.460253] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[95687.576525] ata1.00: configured for UDMA/33
[95687.592243] PM: restore of drv:usb dev:usb1 complete after 130.454 msecs
[95687.716235] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[95687.718270] ata3.00: configured for UDMA/133
[95687.724237] ata5: SATA link down (SStatus 0 SControl 300)
[95687.828231] PM: restore of drv:usb dev:usb2 complete after 235.966 msecs
[95687.940234] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[95688.132605] PM: restore of drv:usb dev:2-6 complete after 303.562 msecs
[95688.132627] sd 2:0:0:0: [sda] Starting disk
[95688.185361] PM: restore of devices complete after 1703.985 msecs
[95688.185546] PM: Image restored successfully.
[95688.185547] Restarting tasks ... done.
[95688.191605] PM: Basic memory bitmaps freed
[95692.305848] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[95692.340178] ADDRCONF(NETDEV_UP): eth0: link is not ready
[95694.034182] tg3: eth0: Link is up at 100 Mbps, full duplex.
[95694.034189] tg3: eth0: Flow control is on for TX and on for RX.
[95694.034649] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[95704.096260] eth0: no IPv6 routers present
[95734.854904] rfkill switch handling already scheduled, dropping this event
[95735.404262] usb 3-2: new full speed USB device using uhci_hcd and address 14
[95735.584508] usb 3-2: configuration #1 chosen from 1 choice
[95735.586365] hub 3-2:1.0: USB hub found
[95735.588367] hub 3-2:1.0: 3 ports detected
[95735.874366] usb 3-2.1: new full speed USB device using uhci_hcd and address 15
[95736.002502] usb 3-2.1: configuration #1 chosen from 1 choice
[95736.093280] usb 3-2.2: new full speed USB device using uhci_hcd and address 16
[95736.223590] usb 3-2.2: configuration #1 chosen from 1 choice
[95736.232417] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input21
[95736.232601] generic-usb 0003:0A5C:4502.0007: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[95736.305276] usb 3-2.3: new full speed USB device using uhci_hcd and address 17
[95736.436514] usb 3-2.3: configuration #1 chosen from 1 choice
[95736.446686] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input22
[95736.446936] generic-usb 0003:0A5C:4503.0008: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[95737.592084] usb 3-2: USB disconnect, address 14
[95737.592087] usb 3-2.1: USB disconnect, address 15
[95737.592204] btusb_intr_complete: hci0 urb e1836880 failed to resubmit (19)
[95737.592213] btusb_bulk_complete: hci0 urb e1836280 failed to resubmit (19)
[95737.593203] btusb_bulk_complete: hci0 urb e1836700 failed to resubmit (19)
[95737.593559] btusb_send_frame: hci0 urb e4a6aa00 submission failed
[95737.844465] usb 3-2.2: USB disconnect, address 16
[95737.868405] usb 3-2.3: USB disconnect, address 17
[108764.777963] rfkill switch handling already scheduled, dropping this event
[108764.782017] rfkill switch handling already scheduled, dropping this event
[110333.945538] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[110333.945541] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[110333.945545] PM: Basic memory bitmaps created
[110333.945546] PM: Syncing filesystems ... done.
[110334.005255] Freezing user space processes ... (elapsed 0.00 seconds) done.
[110334.005985] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[110334.006035] PM: Preallocating image memory... done (allocated 358152 pages)
[110338.752289] PM: Allocated 1432608 kbytes in 4.74 seconds (302.23 MB/s)
[110338.752291] Suspending console(s) (use no_console_suspend to debug)
[110338.776399] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[110338.855352] ACPI handle has no context!
[110338.855361] sdhci-pci 0000:03:01.1: PCI INT B disabled
[110338.855367] ACPI handle has no context!
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110338.892206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[110339.128783] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[110339.144278] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.696 msecs
[110339.176439] ata2: port disabled. ignoring.
[110339.176497] ata_piix 0000:00:1f.1: PCI INT A disabled
[110339.176541] HDA Intel 0000:00:1b.0: PCI INT A disabled
[110339.201841] PM: freeze of devices complete after 449.235 msecs
[110339.202310] ricoh-mmc: Suspending.
[110339.202319] ricoh-mmc: Controller is now re-enabled.
[110339.203106] PM: late freeze of devices complete after 1.262 msecs
[110339.207130] ACPI: Preparing to enter system sleep state S4
[110339.208968] PM: Saving platform NVS memory
[110339.228014] Disabling non-boot CPUs ...
[110339.228032] CPU0 attaching NULL sched-domain.
[110339.228035] CPU1 attaching NULL sched-domain.
[110339.292015] CPU0 attaching NULL sched-domain.
[110339.396028] CPU 1 is now offline
[110339.396031] SMP alternatives: switching to UP code
[110339.402091] Extended CMOS year: 2000
[110339.402189] PM: Creating hibernation image: 
[110339.404008] PM: Need to copy 111115 pages
[110339.404008] PM: Normal pages needed: 86454 + 1024, available pages: 140736
[110339.404008] PM: Restoring platform NVS memory
[110339.404008] CPU0: Thermal monitoring enabled (TM2)
[110339.404008] Extended CMOS year: 2000
[110339.404008] Enabling non-boot CPUs ...
[110339.404008] SMP alternatives: switching to SMP code
[110339.407819] Booting processor 1 APIC 0x1 ip 0x6000
[110339.401742] Initializing CPU#1
[110339.401742] CPU: L1 I cache: 32K, L1 D cache: 32K
[110339.401742] CPU: L2 cache: 4096K
[110339.401742] CPU: Physical Processor ID: 0
[110339.401742] CPU: Processor Core ID: 1
[110339.401742] CPU1: Thermal monitoring enabled (TM2)
[110339.496091] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[110339.496146] CPU0 attaching NULL sched-domain.
[110339.524017] CPU0 attaching sched-domain:
[110339.524019]  domain 0: span 0-1 level MC
[110339.524021]   groups: 0 1
[110339.524025] CPU1 attaching sched-domain:
[110339.524027]  domain 0: span 0-1 level MC
[110339.524029]   groups: 1 0
[110339.524418] CPU1 is up
[110339.524991] ACPI: Waking up from system sleep state S4
[110339.533369] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[110339.533558] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[110339.534133] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[110339.534182] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[110339.534433] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[110339.534645] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcff0000)
[110339.534901] ricoh-mmc: Resuming.
[110339.534910] ricoh-mmc: Controller is now disabled.
[110339.548022] pci 0000:03:01.4: Refused to change power state, currently in D3
[110339.548477] PM: early restore of devices complete after 15.271 msecs
[110339.616803] i915 0000:00:02.0: setting latency timer to 64
[110340.512376] PM: restore of drv:i915 dev:0000:00:02.0 complete after 895.578 msecs
[110340.512393] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[110340.512441] usb usb3: root hub lost power or was reset
[110340.512463] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[110340.512508] usb usb4: root hub lost power or was reset
[110340.512528] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[110340.512533] usb usb1: root hub lost power or was reset
[110340.516410] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[110340.516425] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[110340.516431] HDA Intel 0000:00:1b.0: setting latency timer to 64
[110340.516466] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[110340.516504] usb usb5: root hub lost power or was reset
[110340.516525] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[110340.516563] usb usb6: root hub lost power or was reset
[110340.516584] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[110340.516622] usb usb7: root hub lost power or was reset
[110340.516642] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[110340.516647] usb usb2: root hub lost power or was reset
[110340.520530] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[110340.520543] pci 0000:00:1e.0: setting latency timer to 64
[110340.520557] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[110340.520562] ata_piix 0000:00:1f.1: setting latency timer to 64
[110340.520588] ata1.00: _GTF evaluation failed (AE 0x1001)
[110340.520747] ata2: port disabled. ignoring.
[110340.520762] ahci 0000:00:1f.2: setting latency timer to 64
[110340.578238] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[110340.584252] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[110340.700525] ata1.00: configured for UDMA/33
[110340.716242] PM: restore of drv:usb dev:usb1 complete after 130.454 msecs
[110340.840234] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[110340.842293] ata3.00: configured for UDMA/133
[110340.848240] ata5: SATA link down (SStatus 0 SControl 300)
[110340.952230] PM: restore of drv:usb dev:usb2 complete after 235.964 msecs
[110341.064233] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[110341.256613] PM: restore of drv:usb dev:2-6 complete after 303.466 msecs
[110341.256635] sd 2:0:0:0: [sda] Starting disk
[110341.314866] PM: restore of devices complete after 1736.405 msecs
[110341.315054] PM: Image restored successfully.
[110341.315055] Restarting tasks ... done.
[110341.316112] PM: Basic memory bitmaps freed
[110366.123163] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[110366.156307] ADDRCONF(NETDEV_UP): eth0: link is not ready
[110367.787683] tg3: eth0: Link is up at 100 Mbps, full duplex.
[110367.787691] tg3: eth0: Flow control is on for TX and on for RX.
[110367.788160] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[110378.029021] eth0: no IPv6 routers present
[111381.297513] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[111381.297516] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[111381.297521] PM: Basic memory bitmaps created
[111381.297522] PM: Syncing filesystems ... done.
[111381.361253] Freezing user space processes ... (elapsed 0.00 seconds) done.
[111381.362075] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[111381.362123] PM: Preallocating image memory... done (allocated 358343 pages)
[111383.204756] PM: Allocated 1433372 kbytes in 1.84 seconds (779.00 MB/s)
[111383.204759] Suspending console(s) (use no_console_suspend to debug)
[111383.232401] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[111383.234489] ACPI handle has no context!
[111383.234498] sdhci-pci 0000:03:01.1: PCI INT B disabled
[111383.234504] ACPI handle has no context!
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.272206] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[111383.508771] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[111383.524276] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.694 msecs
[111383.556439] ata2: port disabled. ignoring.
[111383.556496] ata_piix 0000:00:1f.1: PCI INT A disabled
[111383.828249] HDA Intel 0000:00:1b.0: PCI INT A disabled
[111383.844231] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 287.696 msecs
[111383.858607] PM: freeze of devices complete after 653.522 msecs
[111383.859078] ricoh-mmc: Suspending.
[111383.859087] ricoh-mmc: Controller is now re-enabled.
[111383.859875] PM: late freeze of devices complete after 1.266 msecs
[111383.862500] ACPI: Preparing to enter system sleep state S4
[111383.864418] PM: Saving platform NVS memory
[111383.888012] Disabling non-boot CPUs ...
[111383.888031] CPU0 attaching NULL sched-domain.
[111383.888034] CPU1 attaching NULL sched-domain.
[111383.952015] CPU0 attaching NULL sched-domain.
[111384.056036] CPU 1 is now offline
[111384.056039] SMP alternatives: switching to UP code
[111384.062064] Extended CMOS year: 2000
[111384.062163] PM: Creating hibernation image: 
[111384.064009] PM: Need to copy 118633 pages
[111384.064009] PM: Normal pages needed: 86496 + 1024, available pages: 140694
[111384.064009] PM: Restoring platform NVS memory
[111384.064009] CPU0: Thermal monitoring enabled (TM2)
[111384.064009] Extended CMOS year: 2000
[111384.064009] Enabling non-boot CPUs ...
[111384.064009] SMP alternatives: switching to SMP code
[111384.067793] Booting processor 1 APIC 0x1 ip 0x6000
[111384.061765] Initializing CPU#1
[111384.061765] CPU: L1 I cache: 32K, L1 D cache: 32K
[111384.061765] CPU: L2 cache: 4096K
[111384.061765] CPU: Physical Processor ID: 0
[111384.061765] CPU: Processor Core ID: 1
[111384.061765] CPU1: Thermal monitoring enabled (TM2)
[111384.156062] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[111384.156118] CPU0 attaching NULL sched-domain.
[111384.184016] CPU0 attaching sched-domain:
[111384.184019]  domain 0: span 0-1 level MC
[111384.184021]   groups: 0 1
[111384.184025] CPU1 attaching sched-domain:
[111384.184027]  domain 0: span 0-1 level MC
[111384.184028]   groups: 1 0
[111384.184418] CPU1 is up
[111384.184991] ACPI: Waking up from system sleep state S4
[111384.193971] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[111384.194160] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[111384.194734] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[111384.194783] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[111384.195034] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[111384.195246] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcbf0000)
[111384.195501] ricoh-mmc: Resuming.
[111384.195511] ricoh-mmc: Controller is now disabled.
[111384.208022] pci 0000:03:01.4: Refused to change power state, currently in D3
[111384.208476] PM: early restore of devices complete after 14.667 msecs
[111384.282859] i915 0000:00:02.0: setting latency timer to 64
[111385.236381] PM: restore of drv:i915 dev:0000:00:02.0 complete after 953.524 msecs
[111385.236398] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[111385.236445] usb usb3: root hub lost power or was reset
[111385.236467] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[111385.236511] usb usb4: root hub lost power or was reset
[111385.236532] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[111385.236537] usb usb1: root hub lost power or was reset
[111385.240411] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[111385.240426] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[111385.240433] HDA Intel 0000:00:1b.0: setting latency timer to 64
[111385.240467] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[111385.240505] usb usb5: root hub lost power or was reset
[111385.240526] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[111385.240564] usb usb6: root hub lost power or was reset
[111385.240585] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[111385.240623] usb usb7: root hub lost power or was reset
[111385.240643] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[111385.240648] usb usb2: root hub lost power or was reset
[111385.244530] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[111385.244543] pci 0000:00:1e.0: setting latency timer to 64
[111385.244557] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[111385.244562] ata_piix 0000:00:1f.1: setting latency timer to 64
[111385.244588] ata1.00: _GTF evaluation failed (AE 0x1001)
[111385.244747] ata2: port disabled. ignoring.
[111385.244762] ahci 0000:00:1f.2: setting latency timer to 64
[111385.302241] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[111385.308256] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[111385.424524] ata1.00: configured for UDMA/33
[111385.440246] PM: restore of drv:usb dev:usb1 complete after 130.455 msecs
[111385.564237] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[111385.566307] ata3.00: configured for UDMA/133
[111385.572238] ata5: SATA link down (SStatus 0 SControl 300)
[111385.676229] PM: restore of drv:usb dev:usb2 complete after 235.960 msecs
[111385.788232] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[111385.980612] PM: restore of drv:usb dev:2-6 complete after 303.572 msecs
[111385.980634] sd 2:0:0:0: [sda] Starting disk
[111386.035312] PM: restore of devices complete after 1790.668 msecs
[111386.035498] PM: Image restored successfully.
[111386.035500] Restarting tasks ... done.
[111386.036395] PM: Basic memory bitmaps freed
[111393.629712] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[111393.662965] ADDRCONF(NETDEV_UP): eth0: link is not ready
[111395.294254] tg3: eth0: Link is up at 100 Mbps, full duplex.
[111395.294262] tg3: eth0: Flow control is on for TX and on for RX.
[111395.294727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[111405.404145] eth0: no IPv6 routers present
[112143.534779] rfkill switch handling already scheduled, dropping this event
[112144.272068] usb 3-2: new full speed USB device using uhci_hcd and address 18
[112144.451446] usb 3-2: configuration #1 chosen from 1 choice
[112144.453210] hub 3-2:1.0: USB hub found
[112144.455102] hub 3-2:1.0: 3 ports detected
[112144.738140] usb 3-2.1: new full speed USB device using uhci_hcd and address 19
[112144.864449] usb 3-2.1: configuration #1 chosen from 1 choice
[112144.942134] usb 3-2.2: new full speed USB device using uhci_hcd and address 20
[112145.075319] usb 3-2.2: configuration #1 chosen from 1 choice
[112145.082812] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input23
[112145.082992] generic-usb 0003:0A5C:4502.0009: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[112145.162137] usb 3-2.3: new full speed USB device using uhci_hcd and address 21
[112145.292300] usb 3-2.3: configuration #1 chosen from 1 choice
[112145.303520] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input24
[112145.303756] generic-usb 0003:0A5C:4503.000A: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[112146.512254] usb 3-2: USB disconnect, address 18
[112146.512262] usb 3-2.1: USB disconnect, address 19
[112146.513074] btusb_intr_complete: hci0 urb e4b4b680 failed to resubmit (19)
[112146.513099] btusb_bulk_complete: hci0 urb f6bd7d00 failed to resubmit (19)
[112146.514079] btusb_bulk_complete: hci0 urb e4b63f00 failed to resubmit (19)
[112146.514315] btusb_send_frame: hci0 urb e18ecb80 submission failed
[112146.765058] usb 3-2.2: USB disconnect, address 20
[112146.781872] usb 3-2.3: USB disconnect, address 21
[130440.723797] tg3: eth0: Link is down.
[130451.537674] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[130451.537683] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[130451.537694] PM: Basic memory bitmaps created
[130451.537699] PM: Syncing filesystems ... done.
[130451.669291] Freezing user space processes ... (elapsed 0.00 seconds) done.
[130451.670796] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[130451.670899] PM: Preallocating image memory... done (allocated 357598 pages)
[130458.001049] PM: Allocated 1430392 kbytes in 6.33 seconds (225.97 MB/s)
[130458.001052] Suspending console(s) (use no_console_suspend to debug)
[130458.232224] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[130458.232316] PM: freeze of drv:sd dev:2:0:0:0 complete after 204.092 msecs
[130458.234298] ACPI handle has no context!
[130458.234306] sdhci-pci 0000:03:01.1: PCI INT B disabled
[130458.234312] ACPI handle has no context!
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.272205] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[130458.508777] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[130458.524271] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.692 msecs
[130458.556436] ata2: port disabled. ignoring.
[130458.556493] ata_piix 0000:00:1f.1: PCI INT A disabled
[130458.828241] HDA Intel 0000:00:1b.0: PCI INT A disabled
[130458.844227] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 287.695 msecs
[130458.863102] PM: freeze of devices complete after 861.719 msecs
[130458.863575] ricoh-mmc: Suspending.
[130458.863584] ricoh-mmc: Controller is now re-enabled.
[130458.864399] PM: late freeze of devices complete after 1.293 msecs
[130458.867068] ACPI: Preparing to enter system sleep state S4
[130458.868926] PM: Saving platform NVS memory
[130458.885016] Disabling non-boot CPUs ...
[130458.885034] CPU0 attaching NULL sched-domain.
[130458.885036] CPU1 attaching NULL sched-domain.
[130458.928105] CPU0 attaching NULL sched-domain.
[130459.032016] CPU 1 is now offline
[130459.032019] SMP alternatives: switching to UP code
[130459.038162] Extended CMOS year: 2000
[130459.038261] PM: Creating hibernation image: 
[130459.040008] PM: Need to copy 122663 pages
[130459.040008] PM: Normal pages needed: 86814 + 1024, available pages: 140376
[130459.040008] PM: Restoring platform NVS memory
[130459.040008] CPU0: Thermal monitoring enabled (TM2)
[130459.040008] Extended CMOS year: 2000
[130459.040008] Enabling non-boot CPUs ...
[130459.040008] SMP alternatives: switching to SMP code
[130459.043949] Booting processor 1 APIC 0x1 ip 0x6000
[130459.037838] Initializing CPU#1
[130459.037838] CPU: L1 I cache: 32K, L1 D cache: 32K
[130459.037838] CPU: L2 cache: 4096K
[130459.037838] CPU: Physical Processor ID: 0
[130459.037838] CPU: Processor Core ID: 1
[130459.037838] CPU1: Thermal monitoring enabled (TM2)
[130459.132119] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[130459.132185] CPU0 attaching NULL sched-domain.
[130459.160019] CPU0 attaching sched-domain:
[130459.160022]  domain 0: span 0-1 level MC
[130459.160024]   groups: 0 1
[130459.160028] CPU1 attaching sched-domain:
[130459.160030]  domain 0: span 0-1 level MC
[130459.160032]   groups: 1 0
[130459.160422] CPU1 is up
[130459.160997] ACPI: Waking up from system sleep state S4
[130459.169566] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[130459.169755] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[130459.170332] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[130459.170381] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[130459.170632] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[130459.170844] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcff0000)
[130459.171099] ricoh-mmc: Resuming.
[130459.171108] ricoh-mmc: Controller is now disabled.
[130459.184017] pci 0000:03:01.4: Refused to change power state, currently in D3
[130459.184471] PM: early restore of devices complete after 15.068 msecs
[130459.254974] i915 0000:00:02.0: setting latency timer to 64
[130460.152373] PM: restore of drv:i915 dev:0000:00:02.0 complete after 897.400 msecs
[130460.152389] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[130460.152436] usb usb3: root hub lost power or was reset
[130460.152458] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[130460.152502] usb usb4: root hub lost power or was reset
[130460.152523] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[130460.152528] usb usb1: root hub lost power or was reset
[130460.156413] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[130460.156430] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[130460.156437] HDA Intel 0000:00:1b.0: setting latency timer to 64
[130460.156472] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[130460.156510] usb usb5: root hub lost power or was reset
[130460.156531] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[130460.156570] usb usb6: root hub lost power or was reset
[130460.156590] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[130460.156628] usb usb7: root hub lost power or was reset
[130460.156648] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[130460.156654] usb usb2: root hub lost power or was reset
[130460.160532] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[130460.160548] pci 0000:00:1e.0: setting latency timer to 64
[130460.160561] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[130460.160566] ata_piix 0000:00:1f.1: setting latency timer to 64
[130460.160592] ata1.00: _GTF evaluation failed (AE 0x1001)
[130460.160752] ata2: port disabled. ignoring.
[130460.160767] ahci 0000:00:1f.2: setting latency timer to 64
[130460.218242] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[130460.224254] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[130460.340521] ata1.00: configured for UDMA/33
[130460.356239] PM: restore of drv:usb dev:usb1 complete after 130.447 msecs
[130460.480235] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[130460.482290] ata3.00: configured for UDMA/133
[130460.488233] ata5: SATA link down (SStatus 0 SControl 300)
[130460.592225] PM: restore of drv:usb dev:usb2 complete after 235.963 msecs
[130460.704229] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[130460.896607] PM: restore of drv:usb dev:2-6 complete after 303.508 msecs
[130460.896629] sd 2:0:0:0: [sda] Starting disk
[130460.954806] PM: restore of devices complete after 1738.055 msecs
[130460.954992] PM: Image restored successfully.
[130460.954994] Restarting tasks ... done.
[130460.956350] PM: Basic memory bitmaps freed
[130490.937758] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[130490.971011] ADDRCONF(NETDEV_UP): eth0: link is not ready
[130492.602279] tg3: eth0: Link is up at 100 Mbps, full duplex.
[130492.602287] tg3: eth0: Flow control is on for TX and on for RX.
[130492.602750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[130502.956038] eth0: no IPv6 routers present
[133548.361363] tg3: eth0: Link is down.
[133570.512639] tg3: eth0: Link is up at 100 Mbps, full duplex.
[133570.512646] tg3: eth0: Flow control is on for TX and on for RX.
[133598.096887] tg3: eth0: Link is down.
[133609.659532] tg3: eth0: Link is up at 100 Mbps, full duplex.
[133609.659535] tg3: eth0: Flow control is on for TX and on for RX.
[133906.215538] rfkill switch handling already scheduled, dropping this event
[133906.219626] rfkill switch handling already scheduled, dropping this event
[133939.484120] usb 3-2: new full speed USB device using uhci_hcd and address 22
[133939.663424] usb 3-2: configuration #1 chosen from 1 choice
[133939.666279] hub 3-2:1.0: USB hub found
[133939.668147] hub 3-2:1.0: 3 ports detected
[133939.958289] usb 3-2.1: new full speed USB device using uhci_hcd and address 23
[133940.083503] usb 3-2.1: configuration #1 chosen from 1 choice
[133940.166275] usb 3-2.2: new full speed USB device using uhci_hcd and address 24
[133940.300409] usb 3-2.2: configuration #1 chosen from 1 choice
[133940.309921] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input25
[133940.310283] generic-usb 0003:0A5C:4502.000B: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[133940.386205] usb 3-2.3: new full speed USB device using uhci_hcd and address 25
[133940.519370] usb 3-2.3: configuration #1 chosen from 1 choice
[133940.527041] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input26
[133940.527290] generic-usb 0003:0A5C:4503.000C: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[133941.744268] usb 3-2: USB disconnect, address 22
[133941.744277] usb 3-2.1: USB disconnect, address 23
[133941.745238] btusb_intr_complete: hci0 urb e36c1200 failed to resubmit (19)
[133941.745271] btusb_bulk_complete: hci0 urb e36c1280 failed to resubmit (19)
[133941.746240] btusb_bulk_complete: hci0 urb e36c1680 failed to resubmit (19)
[133941.746509] btusb_send_frame: hci0 urb e3493380 submission failed
[133941.997166] usb 3-2.2: USB disconnect, address 24
[133942.017332] usb 3-2.3: USB disconnect, address 25
[139241.173127] usb 3-2: new full speed USB device using uhci_hcd and address 26
[139241.349572] usb 3-2: configuration #1 chosen from 1 choice
[139241.352310] hub 3-2:1.0: USB hub found
[139241.354240] hub 3-2:1.0: 3 ports detected
[139241.634245] usb 3-2.1: new full speed USB device using uhci_hcd and address 27
[139241.761576] usb 3-2.1: configuration #1 chosen from 1 choice
[139241.842398] usb 3-2.2: new full speed USB device using uhci_hcd and address 28
[139241.972352] usb 3-2.2: configuration #1 chosen from 1 choice
[139241.977998] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input27
[139241.978196] generic-usb 0003:0A5C:4502.000D: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[139242.053251] usb 3-2.3: new full speed USB device using uhci_hcd and address 29
[139242.183483] usb 3-2.3: configuration #1 chosen from 1 choice
[139242.191463] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input28
[139242.191922] generic-usb 0003:0A5C:4503.000E: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[139243.488271] usb 3-2: USB disconnect, address 26
[139243.488279] usb 3-2.1: USB disconnect, address 27
[139243.489307] btusb_intr_complete: hci0 urb e3599a80 failed to resubmit (19)
[139243.489340] btusb_bulk_complete: hci0 urb e3599e80 failed to resubmit (19)
[139243.490311] btusb_bulk_complete: hci0 urb e3599c80 failed to resubmit (19)
[139243.490581] btusb_send_frame: hci0 urb e181ae00 submission failed
[139243.741117] usb 3-2.2: USB disconnect, address 28
[139243.764508] usb 3-2.3: USB disconnect, address 29
[139402.506123] tg3: eth0: Link is down.
[139405.975224] tg3: eth0: Link is up at 100 Mbps, full duplex.
[139405.975232] tg3: eth0: Flow control is on for TX and on for RX.
[139421.695103] tg3: eth0: Link is down.
[139423.401951] tg3: eth0: Link is up at 100 Mbps, full duplex.
[139423.401959] tg3: eth0: Flow control is on for TX and on for RX.
[139423.863176] tg3: eth0: Link is down.
[139425.555787] tg3: eth0: Link is up at 100 Mbps, full duplex.
[139425.555794] tg3: eth0: Flow control is on for TX and on for RX.
[140007.442284] tg3: eth0: Link is down.
[140009.181901] tg3: eth0: Link is up at 100 Mbps, full duplex.
[140009.181906] tg3: eth0: Flow control is on for TX and on for RX.
[153738.134161] tg3: eth0: Link is down.
[153739.832977] tg3: eth0: Link is up at 100 Mbps, full duplex.
[153739.832985] tg3: eth0: Flow control is on for TX and on for RX.
[155681.020107] usb 3-2: new full speed USB device using uhci_hcd and address 30
[155681.197336] usb 3-2: configuration #1 chosen from 1 choice
[155681.200266] hub 3-2:1.0: USB hub found
[155681.202114] hub 3-2:1.0: 3 ports detected
[155681.486252] usb 3-2.1: new full speed USB device using uhci_hcd and address 31
[155681.613357] usb 3-2.1: configuration #1 chosen from 1 choice
[155681.694260] usb 3-2.2: new full speed USB device using uhci_hcd and address 32
[155681.829679] usb 3-2.2: configuration #1 chosen from 1 choice
[155681.835728] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input29
[155681.835908] generic-usb 0003:0A5C:4502.000F: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[155681.909233] usb 3-2.3: new full speed USB device using uhci_hcd and address 33
[155682.040364] usb 3-2.3: configuration #1 chosen from 1 choice
[155682.048000] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input30
[155682.048903] generic-usb 0003:0A5C:4503.0010: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[155683.160317] usb 3-2: USB disconnect, address 30
[155683.160326] usb 3-2.1: USB disconnect, address 31
[155683.161185] btusb_intr_complete: hci0 urb e35cc100 failed to resubmit (19)
[155683.161231] btusb_bulk_complete: hci0 urb e35ccf80 failed to resubmit (19)
[155683.162190] btusb_bulk_complete: hci0 urb e4b7c980 failed to resubmit (19)
[155683.162460] btusb_send_frame: hci0 urb e4bf7200 submission failed
[155683.413006] usb 3-2.2: USB disconnect, address 32
[155683.437646] usb 3-2.3: USB disconnect, address 33
[158145.816126] usb 2-4: new high speed USB device using ehci_hcd and address 7
[158145.956419] usb 2-4: configuration #1 chosen from 3 choices
[161821.070444] usb 2-4: USB disconnect, address 7
[172960.816900] tg3: eth0: Link is down.
[172962.549879] tg3: eth0: Link is up at 100 Mbps, full duplex.
[172962.549882] tg3: eth0: Flow control is on for TX and on for RX.
[174964.632074] usb 3-2: new full speed USB device using uhci_hcd and address 34
[174964.812303] usb 3-2: configuration #1 chosen from 1 choice
[174964.815115] hub 3-2:1.0: USB hub found
[174964.817070] hub 3-2:1.0: 3 ports detected
[174965.102133] usb 3-2.1: new full speed USB device using uhci_hcd and address 35
[174965.230360] usb 3-2.1: configuration #1 chosen from 1 choice
[174965.321103] usb 3-2.2: new full speed USB device using uhci_hcd and address 36
[174965.450249] usb 3-2.2: configuration #1 chosen from 1 choice
[174965.458535] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input31
[174965.458634] generic-usb 0003:0A5C:4502.0011: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[174965.537095] usb 3-2.3: new full speed USB device using uhci_hcd and address 37
[174965.673273] usb 3-2.3: configuration #1 chosen from 1 choice
[174965.683018] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input32
[174965.683257] generic-usb 0003:0A5C:4503.0012: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[174966.896163] usb 3-2: USB disconnect, address 34
[174966.896172] usb 3-2.1: USB disconnect, address 35
[174966.897090] btusb_intr_complete: hci0 urb e6632c00 failed to resubmit (19)
[174966.897116] btusb_bulk_complete: hci0 urb e3493280 failed to resubmit (19)
[174966.898101] btusb_bulk_complete: hci0 urb e3493f80 failed to resubmit (19)
[174966.898333] btusb_send_frame: hci0 urb e2804d00 submission failed
[174967.149023] usb 3-2.2: USB disconnect, address 36
[174967.180532] usb 3-2.3: USB disconnect, address 37
[175246.840104] usb 3-2: new full speed USB device using uhci_hcd and address 38
[175247.014998] usb 3-2: configuration #1 chosen from 1 choice
[175247.017800] hub 3-2:1.0: USB hub found
[175247.020375] hub 3-2:1.0: 3 ports detected
[175247.301815] usb 3-2.1: new full speed USB device using uhci_hcd and address 39
[175247.427068] usb 3-2.1: configuration #1 chosen from 1 choice
[175247.508788] usb 3-2.2: new full speed USB device using uhci_hcd and address 40
[175247.648046] usb 3-2.2: configuration #1 chosen from 1 choice
[175247.654108] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input33
[175247.654217] generic-usb 0003:0A5C:4502.0013: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[175247.724977] usb 3-2.3: new full speed USB device using uhci_hcd and address 41
[175247.859035] usb 3-2.3: configuration #1 chosen from 1 choice
[175247.867259] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input34
[175247.867721] generic-usb 0003:0A5C:4503.0014: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[175249.121303] usb 3-2: USB disconnect, address 38
[175249.121312] usb 3-2.1: USB disconnect, address 39
[175249.121867] btusb_intr_complete: hci0 urb e3782900 failed to resubmit (19)
[175249.121902] btusb_bulk_complete: hci0 urb e4f10100 failed to resubmit (19)
[175249.122873] btusb_bulk_complete: hci0 urb e193e980 failed to resubmit (19)
[175249.123139] btusb_send_frame: hci0 urb c319c500 submission failed
[175249.373180] usb 3-2.2: USB disconnect, address 40
[175249.400429] usb 3-2.3: USB disconnect, address 41
[178273.772029] usb 3-2: new full speed USB device using uhci_hcd and address 42
[178273.947180] usb 3-2: configuration #1 chosen from 1 choice
[178273.950137] hub 3-2:1.0: USB hub found
[178273.952076] hub 3-2:1.0: 3 ports detected
[178274.239073] usb 3-2.1: new full speed USB device using uhci_hcd and address 43
[178274.368191] usb 3-2.1: configuration #1 chosen from 1 choice
[178274.455153] usb 3-2.2: new full speed USB device using uhci_hcd and address 44
[178274.585204] usb 3-2.2: configuration #1 chosen from 1 choice
[178274.594386] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input35
[178274.594476] generic-usb 0003:0A5C:4502.0015: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[178274.665097] usb 3-2.3: new full speed USB device using uhci_hcd and address 45
[178274.803339] usb 3-2.3: configuration #1 chosen from 1 choice
[178274.810042] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input36
[178274.810281] generic-usb 0003:0A5C:4503.0016: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[178275.960125] usb 3-2: USB disconnect, address 42
[178275.960129] usb 3-2.1: USB disconnect, address 43
[178275.961056] btusb_intr_complete: hci0 urb e4abdf00 failed to resubmit (19)
[178275.961068] btusb_bulk_complete: hci0 urb e4abd680 failed to resubmit (19)
[178275.962064] btusb_bulk_complete: hci0 urb e4abd400 failed to resubmit (19)
[178275.962558] btusb_send_frame: hci0 urb e3493280 submission failed
[178276.212589] usb 3-2.2: USB disconnect, address 44
[178276.232448] usb 3-2.3: USB disconnect, address 45
[178870.642722] rfkill switch handling already scheduled, dropping this event
[182667.282334] rfkill switch handling already scheduled, dropping this event
[182667.604064] usb 3-2: new full speed USB device using uhci_hcd and address 46
[182667.783461] usb 3-2: configuration #1 chosen from 1 choice
[182667.786196] hub 3-2:1.0: USB hub found
[182667.788143] hub 3-2:1.0: 3 ports detected
[182668.078137] usb 3-2.1: new full speed USB device using uhci_hcd and address 47
[182668.204336] usb 3-2.1: configuration #1 chosen from 1 choice
[182668.289218] usb 3-2.2: new full speed USB device using uhci_hcd and address 48
[182668.425251] usb 3-2.2: configuration #1 chosen from 1 choice
[182668.433713] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input37
[182668.433961] generic-usb 0003:0A5C:4502.0017: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[182668.509154] usb 3-2.3: new full speed USB device using uhci_hcd and address 49
[182668.642269] usb 3-2.3: configuration #1 chosen from 1 choice
[182668.651240] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input38
[182668.653965] generic-usb 0003:0A5C:4503.0018: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[182669.776134] usb 3-2: USB disconnect, address 46
[182669.776138] usb 3-2.1: USB disconnect, address 47
[182669.777076] btusb_intr_complete: hci0 urb e4db8580 failed to resubmit (19)
[182669.777091] btusb_bulk_complete: hci0 urb e3599580 failed to resubmit (19)
[182669.778115] btusb_bulk_complete: hci0 urb e4db8600 failed to resubmit (19)
[182669.778363] btusb_send_frame: hci0 urb e4c02280 submission failed
[182670.029074] usb 3-2.2: USB disconnect, address 48
[182670.053330] usb 3-2.3: USB disconnect, address 49
[182719.250342] rfkill switch handling already scheduled, dropping this event
[184088.926608] rfkill switch handling already scheduled, dropping this event
[184150.284072] usb 2-4: new high speed USB device using ehci_hcd and address 8
[184150.423256] usb 2-4: configuration #1 chosen from 3 choices
[184220.234603] usb 2-4: USB disconnect, address 8
[184264.307660] tg3: eth0: Link is down.
[184266.604808] tg3: eth0: Link is up at 100 Mbps, full duplex.
[184266.604820] tg3: eth0: Flow control is on for TX and on for RX.
[184268.145275] tg3: eth0: Link is down.
[184272.568191] tg3: eth0: Link is up at 100 Mbps, full duplex.
[184272.568203] tg3: eth0: Flow control is on for TX and on for RX.
[184283.427212] tg3: eth0: Link is down.
[184285.914789] tg3: eth0: Link is up at 100 Mbps, full duplex.
[184285.914796] tg3: eth0: Flow control is on for TX and on for RX.
[184291.243843] tg3: eth0: Link is down.
[184292.154629] rfkill switch handling already scheduled, dropping this event
[184292.156629] rfkill switch handling already scheduled, dropping this event
[184292.588081] usb 3-2: new full speed USB device using uhci_hcd and address 50
[184292.761057] usb 3-2: configuration #1 chosen from 1 choice
[184292.763803] hub 3-2:1.0: USB hub found
[184292.765996] hub 3-2:1.0: 3 ports detected
[184293.050745] usb 3-2.1: new full speed USB device using uhci_hcd and address 51
[184293.171960] usb 3-2.1: configuration #1 chosen from 1 choice
[184293.248784] usb 3-2.2: new full speed USB device using uhci_hcd and address 52
[184293.374929] usb 3-2.2: configuration #1 chosen from 1 choice
[184293.381696] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input39
[184293.382041] generic-usb 0003:0A5C:4502.0019: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[184293.452832] usb 3-2.3: new full speed USB device using uhci_hcd and address 53
[184293.579990] usb 3-2.3: configuration #1 chosen from 1 choice
[184293.588142] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input40
[184293.588614] generic-usb 0003:0A5C:4503.001A: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[184294.921299] usb 3-2: USB disconnect, address 50
[184294.921307] usb 3-2.1: USB disconnect, address 51
[184294.921799] btusb_intr_complete: hci0 urb e64f7200 failed to resubmit (19)
[184294.921832] btusb_bulk_complete: hci0 urb e64f7680 failed to resubmit (19)
[184294.922804] btusb_bulk_complete: hci0 urb e64f7280 failed to resubmit (19)
[184294.923094] btusb_send_frame: hci0 urb e37fd000 submission failed
[184295.173004] usb 3-2.2: USB disconnect, address 52
[184295.192325] usb 3-2.3: USB disconnect, address 53
[184553.460191] usb 2-4: new high speed USB device using ehci_hcd and address 9
[184553.598162] usb 2-4: configuration #1 chosen from 3 choices
[185285.149598] usb 2-4: USB disconnect, address 9
[186743.992144] usb 2-4: new high speed USB device using ehci_hcd and address 10
[186744.131811] usb 2-4: configuration #1 chosen from 3 choices
[189242.428095] usb 2-4: USB disconnect, address 10
[189242.700087] hub 2-0:1.0: unable to enumerate USB device on port 4
[189248.128096] usb 2-4: new high speed USB device using ehci_hcd and address 12
[189248.265520] usb 2-4: configuration #1 chosen from 3 choices
[219245.399920] usb 2-4: USB disconnect, address 12
[224818.785538] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[224818.785541] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[224818.785545] PM: Basic memory bitmaps created
[224818.785546] PM: Syncing filesystems ... done.
[224818.869033] Freezing user space processes ... (elapsed 0.00 seconds) done.
[224818.869844] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[224818.869896] PM: Preallocating image memory... done (allocated 356900 pages)
[224830.209394] PM: Allocated 1427600 kbytes in 11.33 seconds (126.00 MB/s)
[224830.209396] Suspending console(s) (use no_console_suspend to debug)
[224830.256400] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[224830.340605] ACPI handle has no context!
[224830.340614] sdhci-pci 0000:03:01.1: PCI INT B disabled
[224830.340620] ACPI handle has no context!
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.380204] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[224830.616978] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[224830.632274] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.694 msecs
[224830.664440] ata2: port disabled. ignoring.
[224830.664498] ata_piix 0000:00:1f.1: PCI INT A disabled
[224830.936246] HDA Intel 0000:00:1b.0: PCI INT A disabled
[224830.952229] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 287.692 msecs
[224830.988388] PM: freeze of devices complete after 778.622 msecs
[224830.988861] ricoh-mmc: Suspending.
[224830.988871] ricoh-mmc: Controller is now re-enabled.
[224830.989699] PM: late freeze of devices complete after 1.308 msecs
[224830.992329] ACPI: Preparing to enter system sleep state S4
[224830.994218] PM: Saving platform NVS memory
[224831.012014] Disabling non-boot CPUs ...
[224831.012032] CPU0 attaching NULL sched-domain.
[224831.012035] CPU1 attaching NULL sched-domain.
[224831.076015] CPU0 attaching NULL sched-domain.
[224831.180029] CPU 1 is now offline
[224831.180031] SMP alternatives: switching to UP code
[224831.186097] Extended CMOS year: 2000
[224831.186195] PM: Creating hibernation image: 
[224831.188009] PM: Need to copy 118640 pages
[224831.188009] PM: Normal pages needed: 87693 + 1024, available pages: 139497
[224831.188009] PM: Restoring platform NVS memory
[224831.188009] CPU0: Thermal monitoring enabled (TM2)
[224831.188009] Extended CMOS year: 2000
[224831.188009] Enabling non-boot CPUs ...
[224831.188009] SMP alternatives: switching to SMP code
[224831.191827] Booting processor 1 APIC 0x1 ip 0x6000
[224831.185710] Initializing CPU#1
[224831.185710] CPU: L1 I cache: 32K, L1 D cache: 32K
[224831.185710] CPU: L2 cache: 4096K
[224831.185710] CPU: Physical Processor ID: 0
[224831.185710] CPU: Processor Core ID: 1
[224831.185710] CPU1: Thermal monitoring enabled (TM2)
[224831.280092] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[224831.280147] CPU0 attaching NULL sched-domain.
[224831.308016] CPU0 attaching sched-domain:
[224831.308019]  domain 0: span 0-1 level MC
[224831.308021]   groups: 0 1
[224831.308025] CPU1 attaching sched-domain:
[224831.308027]  domain 0: span 0-1 level MC
[224831.308028]   groups: 1 0
[224831.308419] CPU1 is up
[224831.308992] ACPI: Waking up from system sleep state S4
[224831.317404] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[224831.317594] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[224831.318171] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[224831.318219] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[224831.318470] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[224831.318682] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcff0000)
[224831.318938] ricoh-mmc: Resuming.
[224831.318947] ricoh-mmc: Controller is now disabled.
[224831.332022] pci 0000:03:01.4: Refused to change power state, currently in D3
[224831.332477] PM: early restore of devices complete after 15.237 msecs
[224831.402257] i915 0000:00:02.0: setting latency timer to 64
[224832.320377] PM: restore of drv:i915 dev:0000:00:02.0 complete after 918.123 msecs
[224832.320394] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[224832.320442] usb usb3: root hub lost power or was reset
[224832.320463] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[224832.320507] usb usb4: root hub lost power or was reset
[224832.320528] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[224832.320533] usb usb1: root hub lost power or was reset
[224832.324420] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[224832.324435] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[224832.324442] HDA Intel 0000:00:1b.0: setting latency timer to 64
[224832.324477] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[224832.324515] usb usb5: root hub lost power or was reset
[224832.324536] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[224832.324575] usb usb6: root hub lost power or was reset
[224832.324596] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[224832.324634] usb usb7: root hub lost power or was reset
[224832.324654] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[224832.324659] usb usb2: root hub lost power or was reset
[224832.328537] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[224832.328551] pci 0000:00:1e.0: setting latency timer to 64
[224832.328564] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[224832.328569] ata_piix 0000:00:1f.1: setting latency timer to 64
[224832.328595] ata1.00: _GTF evaluation failed (AE 0x1001)
[224832.328755] ata2: port disabled. ignoring.
[224832.328770] ahci 0000:00:1f.2: setting latency timer to 64
[224832.386239] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[224832.392253] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[224832.508525] ata1.00: configured for UDMA/33
[224832.524243] PM: restore of drv:usb dev:usb1 complete after 130.456 msecs
[224832.648236] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[224832.650300] ata3.00: configured for UDMA/133
[224832.656236] ata5: SATA link down (SStatus 0 SControl 300)
[224832.760231] PM: restore of drv:usb dev:usb2 complete after 235.964 msecs
[224832.872233] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[224833.064620] PM: restore of drv:usb dev:2-6 complete after 303.576 msecs
[224833.064641] sd 2:0:0:0: [sda] Starting disk
[224833.125536] PM: restore of devices complete after 1761.557 msecs
[224833.125722] PM: Image restored successfully.
[224833.125724] Restarting tasks ... done.
[224833.127143] PM: Basic memory bitmaps freed
[224866.283910] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[224866.316978] ADDRCONF(NETDEV_UP): eth0: link is not ready
[224867.991156] tg3: eth0: Link is up at 100 Mbps, full duplex.
[224867.991163] tg3: eth0: Flow control is on for TX and on for RX.
[224867.991643] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[224875.999299] tg3: eth0: Link is down.
[224878.636129] eth0: no IPv6 routers present
[224879.571061] tg3: eth0: Link is up at 100 Mbps, full duplex.
[224879.571068] tg3: eth0: Flow control is on for TX and on for RX.
[224885.092173] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x00af0900
[224911.047718] tg3: eth0: Link is down.
[224922.618239] tg3: eth0: Link is up at 100 Mbps, full duplex.
[224922.618247] tg3: eth0: Flow control is on for TX and on for RX.
[230421.333919] tg3: eth0: Link is down.
[230422.948500] tg3: eth0: Link is up at 100 Mbps, full duplex.
[230422.948508] tg3: eth0: Flow control is on for TX and on for RX.
[230611.086029] tg3: eth0: Link is down.
[230613.146599] tg3: eth0: Link is up at 100 Mbps, full duplex.
[230613.146606] tg3: eth0: Flow control is on for TX and on for RX.
[230613.375347] tg3: eth0: Link is down.
[230616.862810] tg3: eth0: Link is up at 100 Mbps, full duplex.
[230616.862817] tg3: eth0: Flow control is on for TX and on for RX.
[230635.323294] tg3: eth0: Link is down.
[230636.945377] tg3: eth0: Link is up at 100 Mbps, full duplex.
[230636.945385] tg3: eth0: Flow control is on for TX and on for RX.
[230638.565901] tg3: eth0: Link is down.
[230640.234517] tg3: eth0: Link is up at 100 Mbps, full duplex.
[230640.234525] tg3: eth0: Flow control is on for TX and on for RX.
[230652.308340] tg3: eth0: Link is down.
[230663.892936] tg3: eth0: Link is up at 100 Mbps, full duplex.
[230663.892944] tg3: eth0: Flow control is on for TX and on for RX.
[234045.989103] usb 3-2: new full speed USB device using uhci_hcd and address 54
[234046.165376] usb 3-2: configuration #1 chosen from 1 choice
[234046.167225] hub 3-2:1.0: USB hub found
[234046.169154] hub 3-2:1.0: 3 ports detected
[234046.449164] usb 3-2.1: new full speed USB device using uhci_hcd and address 55
[234046.581405] usb 3-2.1: configuration #1 chosen from 1 choice
[234046.661157] usb 3-2.2: new full speed USB device using uhci_hcd and address 56
[234046.791370] usb 3-2.2: configuration #1 chosen from 1 choice
[234046.799226] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input41
[234046.799400] generic-usb 0003:0A5C:4502.001B: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[234046.877166] usb 3-2.3: new full speed USB device using uhci_hcd and address 57
[234047.008308] usb 3-2.3: configuration #1 chosen from 1 choice
[234047.020480] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input42
[234047.020640] generic-usb 0003:0A5C:4503.001C: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[234048.184174] usb 3-2: USB disconnect, address 54
[234048.184182] usb 3-2.1: USB disconnect, address 55
[234048.185118] btusb_intr_complete: hci0 urb e4d72b00 failed to resubmit (19)
[234048.185141] btusb_bulk_complete: hci0 urb e4d72480 failed to resubmit (19)
[234048.186123] btusb_bulk_complete: hci0 urb e4d72280 failed to resubmit (19)
[234048.186350] btusb_send_frame: hci0 urb e3092b80 submission failed
[234048.436708] usb 3-2.2: USB disconnect, address 56
[234048.456437] usb 3-2.3: USB disconnect, address 57
[241187.028476] tg3: eth0: Link is down.
[241188.645280] tg3: eth0: Link is up at 100 Mbps, full duplex.
[241188.645283] tg3: eth0: Flow control is on for TX and on for RX.
[241800.335443] tg3: eth0: Link is down.
[241801.937272] tg3: eth0: Link is up at 100 Mbps, full duplex.
[241801.937275] tg3: eth0: Flow control is on for TX and on for RX.
[241829.640058] usb 3-2: new full speed USB device using uhci_hcd and address 58
[241829.820230] usb 3-2: configuration #1 chosen from 1 choice
[241829.822105] hub 3-2:1.0: USB hub found
[241829.825032] hub 3-2:1.0: 3 ports detected
[241830.114103] usb 3-2.1: new full speed USB device using uhci_hcd and address 59
[241830.245157] usb 3-2.1: configuration #1 chosen from 1 choice
[241830.325203] usb 3-2.2: new full speed USB device using uhci_hcd and address 60
[241830.459930] usb 3-2.2: configuration #1 chosen from 1 choice
[241830.465443] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input43
[241830.465529] generic-usb 0003:0A5C:4502.001D: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[241830.537090] usb 3-2.3: new full speed USB device using uhci_hcd and address 61
[241830.667239] usb 3-2.3: configuration #1 chosen from 1 choice
[241830.675154] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input44
[241830.675629] generic-usb 0003:0A5C:4503.001E: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[241831.913266] usb 3-2: USB disconnect, address 58
[241831.913269] usb 3-2.1: USB disconnect, address 59
[241831.914038] btusb_intr_complete: hci0 urb e3417380 failed to resubmit (19)
[241831.914049] btusb_bulk_complete: hci0 urb e3417980 failed to resubmit (19)
[241831.915069] btusb_bulk_complete: hci0 urb e3417e80 failed to resubmit (19)
[241831.915184] btusb_send_frame: hci0 urb e17ab600 submission failed
[241832.164560] usb 3-2.2: USB disconnect, address 60
[241832.184438] usb 3-2.3: USB disconnect, address 61
[241905.245031] tg3: eth0: Link is down.
[241906.892148] tg3: eth0: Link is up at 100 Mbps, full duplex.
[241906.892156] tg3: eth0: Flow control is on for TX and on for RX.
[245092.433769] tg3: eth0: Link is down.
[245094.013481] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245094.013483] tg3: eth0: Flow control is on for TX and on for RX.
[245094.140981] tg3: eth0: Link is down.
[245097.237328] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245097.237330] tg3: eth0: Flow control is on for TX and on for RX.
[245097.709532] tg3: eth0: Link is down.
[245099.448864] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245099.448869] tg3: eth0: Flow control is on for TX and on for RX.
[245505.214819] tg3: eth0: Link is down.
[245506.879876] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245506.879884] tg3: eth0: Flow control is on for TX and on for RX.
[245507.430816] tg3: eth0: Link is down.
[245509.179015] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245509.179022] tg3: eth0: Flow control is on for TX and on for RX.
[245513.153092] tg3: eth0: Link is down.
[245514.748935] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245514.748943] tg3: eth0: Flow control is on for TX and on for RX.
[245557.507884] tg3: eth0: Link is down.
[245559.228344] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245559.228351] tg3: eth0: Flow control is on for TX and on for RX.
[245562.522372] tg3: eth0: Link is down.
[245564.163523] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245564.163530] tg3: eth0: Flow control is on for TX and on for RX.
[245565.174244] tg3: eth0: Link is down.
[245566.745364] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245566.745372] tg3: eth0: Flow control is on for TX and on for RX.
[245572.205397] tg3: eth0: Link is down.
[245573.773114] tg3: eth0: Link is up at 100 Mbps, full duplex.
[245573.773121] tg3: eth0: Flow control is on for TX and on for RX.
[246065.204042] rfkill switch handling already scheduled, dropping this event
[246065.332572] rfkill switch handling already scheduled, dropping this event
[246065.340827] rfkill switch handling already scheduled, dropping this event
[246065.808120] usb 3-2: new full speed USB device using uhci_hcd and address 62
[246065.984422] usb 3-2: configuration #1 chosen from 1 choice
[246065.987249] hub 3-2:1.0: USB hub found
[246065.989189] hub 3-2:1.0: 3 ports detected
[246066.273213] usb 3-2.1: new full speed USB device using uhci_hcd and address 63
[246066.399526] usb 3-2.1: configuration #1 chosen from 1 choice
[246066.481234] usb 3-2.2: new full speed USB device using uhci_hcd and address 64
[246066.616329] usb 3-2.2: configuration #1 chosen from 1 choice
[246066.622967] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input45
[246066.623185] generic-usb 0003:0A5C:4502.001F: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[246066.697191] usb 3-2.3: new full speed USB device using uhci_hcd and address 65
[246066.827420] usb 3-2.3: configuration #1 chosen from 1 choice
[246066.835294] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input46
[246066.835755] generic-usb 0003:0A5C:4503.0020: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[246068.000190] usb 3-2: USB disconnect, address 62
[246068.000199] usb 3-2.1: USB disconnect, address 63
[246068.001175] btusb_intr_complete: hci0 urb e3741200 failed to resubmit (19)
[246068.001202] btusb_bulk_complete: hci0 urb e3741280 failed to resubmit (19)
[246068.002262] btusb_bulk_complete: hci0 urb e3741b80 failed to resubmit (19)
[246068.002524] btusb_send_frame: hci0 urb e374e100 submission failed
[246068.253014] usb 3-2.2: USB disconnect, address 64
[246068.280429] usb 3-2.3: USB disconnect, address 65
[246538.743805] tg3: eth0: Link is down.
[246540.399707] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246540.399715] tg3: eth0: Flow control is on for TX and on for RX.
[246548.848227] tg3: eth0: Link is down.
[246552.125849] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246552.125856] tg3: eth0: Flow control is on for TX and on for RX.
[246605.461013] tg3: eth0: Link is down.
[246607.077481] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246607.077489] tg3: eth0: Flow control is on for TX and on for RX.
[246607.353272] tg3: eth0: Link is down.
[246608.984458] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246608.984466] tg3: eth0: Flow control is on for TX and on for RX.
[246644.547179] tg3: eth0: Link is down.
[246646.153659] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246646.153662] tg3: eth0: Flow control is on for TX and on for RX.
[246650.109373] tg3: eth0: Link is down.
[246651.750126] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246651.750134] tg3: eth0: Flow control is on for TX and on for RX.
[246651.844714] tg3: eth0: Link is down.
[246653.457373] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246653.457380] tg3: eth0: Flow control is on for TX and on for RX.
[246654.311541] tg3: eth0: Link is down.
[246655.920094] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246655.920102] tg3: eth0: Flow control is on for TX and on for RX.
[246657.221614] tg3: eth0: Link is down.
[246658.850438] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246658.850446] tg3: eth0: Flow control is on for TX and on for RX.
[246659.207216] tg3: eth0: Link is down.
[246660.865299] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246660.865302] tg3: eth0: Flow control is on for TX and on for RX.
[246663.714013] tg3: eth0: Link is down.
[246665.332893] tg3: eth0: Link is up at 100 Mbps, full duplex.
[246665.332901] tg3: eth0: Flow control is on for TX and on for RX.
[248270.241412] tg3: eth0: Link is down.
[248271.229027] usb 3-2: new full speed USB device using uhci_hcd and address 66
[248271.406349] usb 3-2: configuration #1 chosen from 1 choice
[248271.409228] hub 3-2:1.0: USB hub found
[248271.411091] hub 3-2:1.0: 3 ports detected
[248271.694093] usb 3-2.1: new full speed USB device using uhci_hcd and address 67
[248271.814803] tg3: eth0: Link is up at 100 Mbps, full duplex.
[248271.814811] tg3: eth0: Flow control is on for TX and on for RX.
[248271.824173] usb 3-2.1: configuration #1 chosen from 1 choice
[248271.909191] usb 3-2.2: new full speed USB device using uhci_hcd and address 68
[248272.049334] usb 3-2.2: configuration #1 chosen from 1 choice
[248272.055724] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input47
[248272.055902] generic-usb 0003:0A5C:4502.0021: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[248272.129120] usb 3-2.3: new full speed USB device using uhci_hcd and address 69
[248272.261436] usb 3-2.3: configuration #1 chosen from 1 choice
[248272.268936] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input48
[248272.269193] generic-usb 0003:0A5C:4503.0022: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[248273.464282] usb 3-2: USB disconnect, address 66
[248273.464291] usb 3-2.1: USB disconnect, address 67
[248273.465163] btusb_intr_complete: hci0 urb e37fd900 failed to resubmit (19)
[248273.465196] btusb_bulk_complete: hci0 urb e37fd600 failed to resubmit (19)
[248273.466171] btusb_bulk_complete: hci0 urb e3728f80 failed to resubmit (19)
[248273.466435] btusb_send_frame: hci0 urb e483ff00 submission failed
[248273.717173] usb 3-2.2: USB disconnect, address 68
[248273.744913] usb 3-2.3: USB disconnect, address 69
[248275.041534] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[248275.041537] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[248275.041541] PM: Basic memory bitmaps created
[248275.041543] PM: Syncing filesystems ... done.
[248275.529257] Freezing user space processes ... (elapsed 0.00 seconds) done.
[248275.530090] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[248275.530136] PM: Preallocating image memory... done (allocated 356635 pages)
[248282.954322] PM: Allocated 1426540 kbytes in 7.42 seconds (192.25 MB/s)
[248282.954325] Suspending console(s) (use no_console_suspend to debug)
[248282.980395] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[248283.105109] PM: freeze of drv:sd dev:2:0:0:0 complete after 124.717 msecs
[248283.106123] ACPI handle has no context!
[248283.106131] sdhci-pci 0000:03:01.1: PCI INT B disabled
[248283.106137] ACPI handle has no context!
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.144207] iwl3945 0000:0c:00.0: MAC is in deep sleep!.  CSR_GP_CNTRL = 0x000003C8
[248283.380779] iwl3945 0000:0c:00.0: Hardware error detected.  Restarting.
[248283.396276] PM: freeze of drv:iwl3945 dev:0000:0c:00.0 complete after 255.694 msecs
[248283.428438] ata2: port disabled. ignoring.
[248283.428495] ata_piix 0000:00:1f.1: PCI INT A disabled
[248283.700321] HDA Intel 0000:00:1b.0: PCI INT A disabled
[248283.716232] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 287.699 msecs
[248283.753324] PM: freeze of devices complete after 798.680 msecs
[248283.753798] ricoh-mmc: Suspending.
[248283.753807] ricoh-mmc: Controller is now re-enabled.
[248283.754596] PM: late freeze of devices complete after 1.269 msecs
[248283.757165] ACPI: Preparing to enter system sleep state S4
[248283.759081] PM: Saving platform NVS memory
[248283.776013] Disabling non-boot CPUs ...
[248283.776032] CPU0 attaching NULL sched-domain.
[248283.776035] CPU1 attaching NULL sched-domain.
[248283.840017] CPU0 attaching NULL sched-domain.
[248283.944017] CPU 1 is now offline
[248283.944019] SMP alternatives: switching to UP code
[248283.950057] Extended CMOS year: 2000
[248283.950155] PM: Creating hibernation image: 
[248283.952008] PM: Need to copy 125591 pages
[248283.952008] PM: Normal pages needed: 87894 + 1024, available pages: 139296
[248283.952008] PM: Restoring platform NVS memory
[248283.952008] CPU0: Thermal monitoring enabled (TM2)
[248283.952008] Extended CMOS year: 2000
[248283.952008] Enabling non-boot CPUs ...
[248283.952008] SMP alternatives: switching to SMP code
[248283.955881] Booting processor 1 APIC 0x1 ip 0x6000
[248283.949751] Initializing CPU#1
[248283.949751] CPU: L1 I cache: 32K, L1 D cache: 32K
[248283.949751] CPU: L2 cache: 4096K
[248283.949751] CPU: Physical Processor ID: 0
[248283.949751] CPU: Processor Core ID: 1
[248283.949751] CPU1: Thermal monitoring enabled (TM2)
[248284.044049] CPU1: Intel(R) Core(TM)2 Duo CPU     T7500  @ 2.20GHz stepping 0b
[248284.044121] CPU0 attaching NULL sched-domain.
[248284.072019] CPU0 attaching sched-domain:
[248284.072021]  domain 0: span 0-1 level MC
[248284.072023]   groups: 0 1
[248284.072027] CPU1 attaching sched-domain:
[248284.072029]  domain 0: span 0-1 level MC
[248284.072031]   groups: 1 0
[248284.072434] CPU1 is up
[248284.073007] ACPI: Waking up from system sleep state S4
[248284.081308] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[248284.081498] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
[248284.082074] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2880001, writing 0x2880005)
[248284.082122] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[248284.082372] iwl3945 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
[248284.082584] tg3 0000:09:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfcff0000)
[248284.082839] ricoh-mmc: Resuming.
[248284.082849] ricoh-mmc: Controller is now disabled.
[248284.096017] pci 0000:03:01.4: Refused to change power state, currently in D3
[248284.096470] PM: early restore of devices complete after 15.325 msecs
[248284.167487] i915 0000:00:02.0: setting latency timer to 64
[248285.116373] PM: restore of drv:i915 dev:0000:00:02.0 complete after 948.887 msecs
[248285.116389] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[248285.116436] usb usb3: root hub lost power or was reset
[248285.116458] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[248285.116503] usb usb4: root hub lost power or was reset
[248285.116523] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[248285.116528] usb usb1: root hub lost power or was reset
[248285.120404] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[248285.120421] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[248285.120428] HDA Intel 0000:00:1b.0: setting latency timer to 64
[248285.120463] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[248285.120501] usb usb5: root hub lost power or was reset
[248285.120522] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[248285.120561] usb usb6: root hub lost power or was reset
[248285.120581] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[248285.120620] usb usb7: root hub lost power or was reset
[248285.120641] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[248285.120645] usb usb2: root hub lost power or was reset
[248285.124525] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[248285.124541] pci 0000:00:1e.0: setting latency timer to 64
[248285.124555] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[248285.124560] ata_piix 0000:00:1f.1: setting latency timer to 64
[248285.124585] ata1.00: _GTF evaluation failed (AE 0x1001)
[248285.124746] ata2: port disabled. ignoring.
[248285.124760] ahci 0000:00:1f.2: setting latency timer to 64
[248285.182242] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[fe4ff800-fe4fffff]  Max Packet=[2048]  IR/IT contexts=[4/4]
[248285.188254] sdhci-pci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[248285.304521] ata1.00: configured for UDMA/33
[248285.320239] PM: restore of drv:usb dev:usb1 complete after 130.449 msecs
[248285.444235] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[248285.446283] ata3.00: configured for UDMA/133
[248285.452233] ata5: SATA link down (SStatus 0 SControl 300)
[248285.556225] PM: restore of drv:usb dev:usb2 complete after 235.963 msecs
[248285.700235] PM: restore of drv:usb dev:usb3 complete after 143.991 msecs
[248285.812228] usb 2-6: reset high speed USB device using ehci_hcd and address 3
[248286.004725] PM: restore of drv:usb dev:2-6 complete after 303.677 msecs
[248286.004746] sd 2:0:0:0: [sda] Starting disk
[248286.056562] PM: restore of devices complete after 1927.309 msecs
[248286.056750] PM: Image restored successfully.
[248286.056752] Restarting tasks ... done.
[248286.058043] PM: Basic memory bitmaps freed
[248320.231775] tg3 0000:09:00.0: irq 31 for MSI/MSI-X
[248320.264938] ADDRCONF(NETDEV_UP): eth0: link is not ready
[248321.878718] tg3: eth0: Link is up at 100 Mbps, full duplex.
[248321.878726] tg3: eth0: Flow control is on for TX and on for RX.
[248321.879173] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[248332.612168] eth0: no IPv6 routers present
[251243.956464] usb 2-4: new high speed USB device using ehci_hcd and address 13
[251244.096447] usb 2-4: configuration #1 chosen from 3 choices
[251440.684853] tg3: eth0: Link is down.
[251442.339262] tg3: eth0: Link is up at 100 Mbps, full duplex.
[251442.339269] tg3: eth0: Flow control is on for TX and on for RX.
[252799.378049] tg3: eth0: Link is down.
[252800.950056] tg3: eth0: Link is up at 100 Mbps, full duplex.
[252800.950064] tg3: eth0: Flow control is on for TX and on for RX.
[255385.929964] tg3: eth0: Link is down.
[255387.555494] tg3: eth0: Link is up at 100 Mbps, full duplex.
[255387.555502] tg3: eth0: Flow control is on for TX and on for RX.
[255395.319840] tg3: eth0: Link is down.
[255396.920944] tg3: eth0: Link is up at 100 Mbps, full duplex.
[255396.920951] tg3: eth0: Flow control is on for TX and on for RX.
[255995.168000] tg3: eth0: Link is down.
[255996.796290] tg3: eth0: Link is up at 100 Mbps, full duplex.
[255996.796298] tg3: eth0: Flow control is on for TX and on for RX.
[256401.085722] usb 2-4: USB disconnect, address 13
[256786.245907] tg3: eth0: Link is down.
[256787.901263] tg3: eth0: Link is up at 100 Mbps, full duplex.
[256787.901271] tg3: eth0: Flow control is on for TX and on for RX.
[261746.960038] tg3: eth0: Link is down.
[261750.545973] tg3: eth0: Link is up at 100 Mbps, full duplex.
[261750.545980] tg3: eth0: Flow control is on for TX and on for RX.
[261751.301795] tg3: eth0: Link is down.
[261752.918264] tg3: eth0: Link is up at 100 Mbps, full duplex.
[261752.918272] tg3: eth0: Flow control is on for TX and on for RX.
[261753.711796] tg3: eth0: Link is down.
[261755.321231] tg3: eth0: Link is up at 100 Mbps, full duplex.
[261755.321239] tg3: eth0: Flow control is on for TX and on for RX.
[261756.126501] tg3: eth0: Link is down.
[261757.746437] tg3: eth0: Link is up at 100 Mbps, full duplex.
[261757.746445] tg3: eth0: Flow control is on for TX and on for RX.
[273185.124961] iwl3945 0000:0c:00.0: Radio disabled by HW RF Kill switch
[273191.420182] usb 2-4: new high speed USB device using ehci_hcd and address 14
[273191.560361] usb 2-4: configuration #1 chosen from 3 choices
[274035.566964] rfkill switch handling already scheduled, dropping this event
[274035.569017] rfkill switch handling already scheduled, dropping this event
[274127.057545] tg3: eth0: Link is down.
[274128.706043] tg3: eth0: Link is up at 100 Mbps, full duplex.
[274128.706051] tg3: eth0: Flow control is on for TX and on for RX.
[288309.333302] tg3: eth0: Link is down.
[288320.938375] tg3: eth0: Link is up at 100 Mbps, full duplex.
[288320.938383] tg3: eth0: Flow control is on for TX and on for RX.
[300989.613502] usb 2-4: USB disconnect, address 14
[301667.168293] usb 3-2: new full speed USB device using uhci_hcd and address 70
[301667.347483] usb 3-2: configuration #1 chosen from 1 choice
[301667.349479] hub 3-2:1.0: USB hub found
[301667.352465] hub 3-2:1.0: 3 ports detected
[301667.645133] usb 3-2.1: new full speed USB device using uhci_hcd and address 71
[301667.772395] usb 3-2.1: configuration #1 chosen from 1 choice
[301667.853139] usb 3-2.2: new full speed USB device using uhci_hcd and address 72
[301667.983390] usb 3-2.2: configuration #1 chosen from 1 choice
[301667.989179] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input49
[301667.989523] generic-usb 0003:0A5C:4502.0023: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[301668.062343] usb 3-2.3: new full speed USB device using uhci_hcd and address 73
[301668.205378] usb 3-2.3: configuration #1 chosen from 1 choice
[301668.214688] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input50
[301668.214924] generic-usb 0003:0A5C:4503.0024: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[301669.352307] usb 3-2: USB disconnect, address 70
[301669.352316] usb 3-2.1: USB disconnect, address 71
[301669.353205] btusb_intr_complete: hci0 urb e4d72580 failed to resubmit (19)
[301669.353238] btusb_bulk_complete: hci0 urb e4d72a80 failed to resubmit (19)
[301669.354213] btusb_bulk_complete: hci0 urb e4d72280 failed to resubmit (19)
[301669.354480] btusb_send_frame: hci0 urb e4c04f00 submission failed
[301669.605031] usb 3-2.2: USB disconnect, address 72
[301669.628438] usb 3-2.3: USB disconnect, address 73
[301803.756092] usb 3-2: new full speed USB device using uhci_hcd and address 74
[301803.935346] usb 3-2: configuration #1 chosen from 1 choice
[301803.938177] hub 3-2:1.0: USB hub found
[301803.940162] hub 3-2:1.0: 3 ports detected
[301804.226148] usb 3-2.1: new full speed USB device using uhci_hcd and address 75
[301804.352336] usb 3-2.1: configuration #1 chosen from 1 choice
[301804.429129] usb 3-2.2: new full speed USB device using uhci_hcd and address 76
[301804.563231] usb 3-2.2: configuration #1 chosen from 1 choice
[301804.572712] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input51
[301804.572803] generic-usb 0003:0A5C:4502.0025: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[301804.645153] usb 3-2.3: new full speed USB device using uhci_hcd and address 77
[301804.778458] usb 3-2.3: configuration #1 chosen from 1 choice
[301804.786958] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input52
[301804.787215] generic-usb 0003:0A5C:4503.0026: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[301806.000198] usb 3-2: USB disconnect, address 74
[301806.000207] usb 3-2.1: USB disconnect, address 75
[301806.001100] btusb_intr_complete: hci0 urb e4bf7200 failed to resubmit (19)
[301806.001126] btusb_bulk_complete: hci0 urb e4bf7f00 failed to resubmit (19)
[301806.002110] btusb_bulk_complete: hci0 urb e4bf7080 failed to resubmit (19)
[301806.002350] btusb_send_frame: hci0 urb e3481a00 submission failed
[301806.253034] usb 3-2.2: USB disconnect, address 76
[301806.272340] usb 3-2.3: USB disconnect, address 77
[303580.525128] usb 3-2: new full speed USB device using uhci_hcd and address 78
[303580.758295] usb 3-2: configuration #1 chosen from 1 choice
[303580.761238] hub 3-2:1.0: USB hub found
[303580.764856] hub 3-2:1.0: 3 ports detected
[303581.050183] usb 3-2.1: new full speed USB device using uhci_hcd and address 79
[303581.175490] usb 3-2.1: configuration #1 chosen from 1 choice
[303581.253306] usb 3-2.2: new full speed USB device using uhci_hcd and address 80
[303581.370271] rfkill switch handling already scheduled, dropping this event
[303581.382217] usb 3-2.2: configuration #1 chosen from 1 choice
[303581.388526] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input53
[303581.388615] generic-usb 0003:0A5C:4502.0027: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[303581.461181] usb 3-2.3: new full speed USB device using uhci_hcd and address 81
[303581.595389] usb 3-2.3: configuration #1 chosen from 1 choice
[303581.603280] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input54
[303581.603520] generic-usb 0003:0A5C:4503.0028: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[303582.672265] usb 3-2: USB disconnect, address 78
[303582.672273] usb 3-2.1: USB disconnect, address 79
[303582.673152] btusb_intr_complete: hci0 urb e48bae00 failed to resubmit (19)
[303582.673186] btusb_bulk_complete: hci0 urb e6513680 failed to resubmit (19)
[303582.674130] btusb_bulk_complete: hci0 urb e4b20b80 failed to resubmit (19)
[303582.674876] btusb_send_frame: hci0 urb e18ecd80 submission failed
[303582.925058] usb 3-2.2: USB disconnect, address 80
[303582.948448] usb 3-2.3: USB disconnect, address 81
[304111.746531] rfkill switch handling already scheduled, dropping this event
[304112.284065] usb 3-2: new full speed USB device using uhci_hcd and address 82
[304112.466213] usb 3-2: configuration #1 chosen from 1 choice
[304112.469112] hub 3-2:1.0: USB hub found
[304112.471352] hub 3-2:1.0: 3 ports detected
[304112.754076] usb 3-2.1: new full speed USB device using uhci_hcd and address 83
[304112.881206] usb 3-2.1: configuration #1 chosen from 1 choice
[304112.961066] usb 3-2.2: new full speed USB device using uhci_hcd and address 84
[304113.096242] usb 3-2.2: configuration #1 chosen from 1 choice
[304113.103634] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input55
[304113.103732] generic-usb 0003:0A5C:4502.0029: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[304113.178083] usb 3-2.3: new full speed USB device using uhci_hcd and address 85
[304113.311195] usb 3-2.3: configuration #1 chosen from 1 choice
[304113.318453] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input56
[304113.318552] generic-usb 0003:0A5C:4503.002A: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[304114.632145] usb 3-2: USB disconnect, address 82
[304114.632151] usb 3-2.1: USB disconnect, address 83
[304114.633063] btusb_intr_complete: hci0 urb e36c9000 failed to resubmit (19)
[304114.633080] btusb_bulk_complete: hci0 urb e36c9200 failed to resubmit (19)
[304114.634062] btusb_bulk_complete: hci0 urb e36c9680 failed to resubmit (19)
[304114.634549] btusb_send_frame: hci0 urb e48a5480 submission failed
[304114.886000] usb 3-2.2: USB disconnect, address 84
[304114.905337] usb 3-2.3: USB disconnect, address 85
[304388.844033] usb 3-2: new full speed USB device using uhci_hcd and address 86
[304389.025243] usb 3-2: configuration #1 chosen from 1 choice
[304389.027111] hub 3-2:1.0: USB hub found
[304389.029524] hub 3-2:1.0: 3 ports detected
[304389.310096] usb 3-2.1: new full speed USB device using uhci_hcd and address 87
[304389.444118] usb 3-2.1: configuration #1 chosen from 1 choice
[304389.521059] usb 3-2.2: new full speed USB device using uhci_hcd and address 88
[304389.654246] usb 3-2.2: configuration #1 chosen from 1 choice
[304389.660508] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input57
[304389.660598] generic-usb 0003:0A5C:4502.002B: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[304389.737095] usb 3-2.3: new full speed USB device using uhci_hcd and address 89
[304389.872175] usb 3-2.3: configuration #1 chosen from 1 choice
[304389.881585] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input58
[304389.881697] generic-usb 0003:0A5C:4503.002C: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[304391.152133] usb 3-2: USB disconnect, address 86
[304391.152139] usb 3-2.1: USB disconnect, address 87
[304391.153059] btusb_intr_complete: hci0 urb e4ba9680 failed to resubmit (19)
[304391.153075] btusb_bulk_complete: hci0 urb e64d5680 failed to resubmit (19)
[304391.154074] btusb_bulk_complete: hci0 urb e64d5e80 failed to resubmit (19)
[304391.154260] btusb_send_frame: hci0 urb e18e2680 submission failed
[304391.405568] usb 3-2.2: USB disconnect, address 88
[304391.428472] usb 3-2.3: USB disconnect, address 89
[305104.393212] atkbd.c: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
[305104.393220] atkbd.c: Use 'setkeycodes e00e <keycode>' to make it known.
[305104.433301] tg3: eth0: Link is down.
[305104.548010] atkbd.c: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
[305104.548019] atkbd.c: Use 'setkeycodes e00e <keycode>' to make it known.
[305106.083237] tg3: eth0: Link is up at 100 Mbps, full duplex.
[305106.083240] tg3: eth0: Flow control is on for TX and on for RX.
[305122.040157] usb 3-2: new full speed USB device using uhci_hcd and address 90
[305122.218416] usb 3-2: configuration #1 chosen from 1 choice
[305122.221250] hub 3-2:1.0: USB hub found
[305122.223159] hub 3-2:1.0: 3 ports detected
[305122.507209] usb 3-2.1: new full speed USB device using uhci_hcd and address 91
[305122.635381] usb 3-2.1: configuration #1 chosen from 1 choice
[305122.717226] usb 3-2.2: new full speed USB device using uhci_hcd and address 92
[305122.854029] usb 3-2.2: configuration #1 chosen from 1 choice
[305122.861619] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input59
[305122.861711] generic-usb 0003:0A5C:4502.002D: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[305122.933198] usb 3-2.3: new full speed USB device using uhci_hcd and address 93
[305123.064521] usb 3-2.3: configuration #1 chosen from 1 choice
[305123.072095] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input60
[305123.072381] generic-usb 0003:0A5C:4503.002E: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[305124.240160] usb 3-2: USB disconnect, address 90
[305124.240169] usb 3-2.1: USB disconnect, address 91
[305124.241133] btusb_intr_complete: hci0 urb e671ce80 failed to resubmit (19)
[305124.241158] btusb_bulk_complete: hci0 urb e671cd80 failed to resubmit (19)
[305124.242138] btusb_bulk_complete: hci0 urb e671cc00 failed to resubmit (19)
[305124.242376] btusb_send_frame: hci0 urb e1a20780 submission failed
[305124.493138] usb 3-2.2: USB disconnect, address 92
[305124.512352] usb 3-2.3: USB disconnect, address 93
[305811.489943] tg3: eth0: Link is down.
[305813.524188] tg3: eth0: Link is up at 100 Mbps, full duplex.
[305813.524196] tg3: eth0: Flow control is on for TX and on for RX.
[305851.247064] tg3: eth0: Link is down.
[305862.830845] tg3: eth0: Link is up at 100 Mbps, full duplex.
[305862.830853] tg3: eth0: Flow control is on for TX and on for RX.
[305865.482100] rfkill switch handling already scheduled, dropping this event
[305865.484093] rfkill switch handling already scheduled, dropping this event
[306320.922864] tg3: eth0: Link is down.
[306340.212364] tg3: eth0: Link is up at 100 Mbps, full duplex.
[306340.212372] tg3: eth0: Flow control is on for TX and on for RX.
[306366.774246] tg3: eth0: Link is down.
[306378.410760] tg3: eth0: Link is up at 100 Mbps, full duplex.
[306378.410768] tg3: eth0: Flow control is on for TX and on for RX.
[307102.321429] tg3: eth0: Link is down.
[307202.239322] tg3: eth0: Link is up at 100 Mbps, full duplex.
[307202.239330] tg3: eth0: Flow control is on for TX and on for RX.
[307230.925275] tg3: eth0: Link is down.
[307242.506079] tg3: eth0: Link is up at 100 Mbps, full duplex.
[307242.506081] tg3: eth0: Flow control is on for TX and on for RX.
[312331.097642] tg3: eth0: Link is down.
[312340.727447] tg3: eth0: Link is up at 100 Mbps, full duplex.
[312340.727455] tg3: eth0: Flow control is on for TX and on for RX.
[312379.840023] tg3: eth0: Link is down.
[312391.508480] tg3: eth0: Link is up at 100 Mbps, full duplex.
[312391.508487] tg3: eth0: Flow control is on for TX and on for RX.
[316945.034955] iwl3945 0000:0c:00.0: Radio disabled by HW RF Kill switch
[316945.136778] iwl3945 0000:0c:00.0: Radio disabled by HW RF Kill switch
[316945.570190] iwl3945 0000:0c:00.0: Radio disabled by HW RF Kill switch
[316945.902207] iwl3945 0000:0c:00.0: Radio disabled by HW RF Kill switch
[317030.744377] usb 3-2: new full speed USB device using uhci_hcd and address 94
[317030.926274] usb 3-2: configuration #1 chosen from 1 choice
[317030.929171] hub 3-2:1.0: USB hub found
[317030.931161] hub 3-2:1.0: 3 ports detected
[317031.210176] usb 3-2.1: new full speed USB device using uhci_hcd and address 95
[317031.342349] usb 3-2.1: configuration #1 chosen from 1 choice
[317031.425127] usb 3-2.2: new full speed USB device using uhci_hcd and address 96
[317031.560325] usb 3-2.2: configuration #1 chosen from 1 choice
[317031.566593] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input61
[317031.566683] generic-usb 0003:0A5C:4502.002F: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[317031.641111] usb 3-2.3: new full speed USB device using uhci_hcd and address 97
[317031.775264] usb 3-2.3: configuration #1 chosen from 1 choice
[317031.786135] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input62
[317031.788719] generic-usb 0003:0A5C:4503.0030: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[317032.952165] usb 3-2: USB disconnect, address 94
[317032.952173] usb 3-2.1: USB disconnect, address 95
[317032.953068] btusb_intr_complete: hci0 urb e374e200 failed to resubmit (19)
[317032.953096] btusb_bulk_complete: hci0 urb e374ef00 failed to resubmit (19)
[317032.954098] btusb_bulk_complete: hci0 urb e374e900 failed to resubmit (19)
[317032.954335] btusb_send_frame: hci0 urb e0eb8380 submission failed
[317033.205048] usb 3-2.2: USB disconnect, address 96
[317033.224519] usb 3-2.3: USB disconnect, address 97
[317084.228138] usb 3-2: new full speed USB device using uhci_hcd and address 98
[317084.400417] usb 3-2: configuration #1 chosen from 1 choice
[317084.402316] hub 3-2:1.0: USB hub found
[317084.408487] hub 3-2:1.0: 3 ports detected
[317084.689246] usb 3-2.1: new full speed USB device using uhci_hcd and address 99
[317084.816466] usb 3-2.1: configuration #1 chosen from 1 choice
[317084.900245] usb 3-2.2: new full speed USB device using uhci_hcd and address 100
[317085.036338] usb 3-2.2: configuration #1 chosen from 1 choice
[317085.044963] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input63
[317085.046444] generic-usb 0003:0A5C:4502.0031: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[317085.121248] usb 3-2.3: new full speed USB device using uhci_hcd and address 101
[317085.252434] usb 3-2.3: configuration #1 chosen from 1 choice
[317085.265231] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input64
[317085.265339] generic-usb 0003:0A5C:4503.0032: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[317086.520289] usb 3-2: USB disconnect, address 98
[317086.520298] usb 3-2.1: USB disconnect, address 99
[317086.521200] btusb_intr_complete: hci0 urb e3092900 failed to resubmit (19)
[317086.521232] btusb_bulk_complete: hci0 urb e3092500 failed to resubmit (19)
[317086.522206] btusb_bulk_complete: hci0 urb e3092f00 failed to resubmit (19)
[317086.523070] btusb_send_frame: hci0 urb e671ce00 submission failed
[317086.773074] usb 3-2.2: USB disconnect, address 100
[317086.800465] usb 3-2.3: USB disconnect, address 101
[317110.136081] usb 3-2: new full speed USB device using uhci_hcd and address 102
[317110.309501] usb 3-2: configuration #1 chosen from 1 choice
[317110.311302] hub 3-2:1.0: USB hub found
[317110.313258] hub 3-2:1.0: 3 ports detected
[317110.598272] usb 3-2.1: new full speed USB device using uhci_hcd and address 103
[317110.723495] usb 3-2.1: configuration #1 chosen from 1 choice
[317110.801201] usb 3-2.2: new full speed USB device using uhci_hcd and address 104
[317110.937304] usb 3-2.2: configuration #1 chosen from 1 choice
[317110.945597] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input65
[317110.945683] generic-usb 0003:0A5C:4502.0033: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[317111.017189] usb 3-2.3: new full speed USB device using uhci_hcd and address 105
[317111.147422] usb 3-2.3: configuration #1 chosen from 1 choice
[317111.161224] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input66
[317111.162442] generic-usb 0003:0A5C:4503.0034: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[317112.312164] usb 3-2: USB disconnect, address 102
[317112.312173] usb 3-2.1: USB disconnect, address 103
[317112.313154] btusb_intr_complete: hci0 urb e3782e00 failed to resubmit (19)
[317112.313189] btusb_bulk_complete: hci0 urb e3782480 failed to resubmit (19)
[317112.314229] btusb_bulk_complete: hci0 urb e3782800 failed to resubmit (19)
[317112.314497] btusb_send_frame: hci0 urb e193e280 submission failed
[317112.565020] usb 3-2.2: USB disconnect, address 104
[317112.585637] usb 3-2.3: USB disconnect, address 105
[318377.544933] tg3: eth0: Link is down.
[318378.468094] usb 3-2: new full speed USB device using uhci_hcd and address 106
[318378.643489] usb 3-2: configuration #1 chosen from 1 choice
[318378.646302] hub 3-2:1.0: USB hub found
[318378.648209] hub 3-2:1.0: 3 ports detected
[318378.929257] usb 3-2.1: new full speed USB device using uhci_hcd and address 107
[318379.056485] usb 3-2.1: configuration #1 chosen from 1 choice
[318379.136274] usb 3-2.2: new full speed USB device using uhci_hcd and address 108
[318379.270481] usb 3-2.2: configuration #1 chosen from 1 choice
[318379.277228] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input67
[318379.277568] generic-usb 0003:0A5C:4502.0035: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[318379.295110] tg3: eth0: Link is up at 100 Mbps, full duplex.
[318379.295112] tg3: eth0: Flow control is on for TX and on for RX.
[318379.349318] usb 3-2.3: new full speed USB device using uhci_hcd and address 109
[318379.481575] usb 3-2.3: configuration #1 chosen from 1 choice
[318379.489376] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input68
[318379.489876] generic-usb 0003:0A5C:4503.0036: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[318380.832154] usb 3-2: USB disconnect, address 106
[318380.832162] usb 3-2.1: USB disconnect, address 107
[318380.832189] btusb_intr_complete: hci0 urb e36c9c80 failed to resubmit (19)
[318380.832209] btusb_bulk_complete: hci0 urb e4bf7680 failed to resubmit (19)
[318380.833305] btusb_bulk_complete: hci0 urb e4bf7580 failed to resubmit (19)
[318380.833578] btusb_send_frame: hci0 urb e65c4500 submission failed
[318381.085011] usb 3-2.2: USB disconnect, address 108
[318381.108414] usb 3-2.3: USB disconnect, address 109
[320967.507091] tg3: eth0: Link is down.
[320969.186146] tg3: eth0: Link is up at 100 Mbps, full duplex.
[320969.186153] tg3: eth0: Flow control is on for TX and on for RX.
[322911.512756] rfkill switch handling already scheduled, dropping this event
[333852.602512] tg3: eth0: Link is down.
[333854.261138] tg3: eth0: Link is up at 100 Mbps, full duplex.
[333854.261145] tg3: eth0: Flow control is on for TX and on for RX.
[334010.449330] tg3: eth0: Link is down.
[334012.014691] tg3: eth0: Link is up at 100 Mbps, full duplex.
[334012.014698] tg3: eth0: Flow control is on for TX and on for RX.
[335067.706545] tg3: eth0: Link is down.
[335069.348974] tg3: eth0: Link is up at 100 Mbps, full duplex.
[335069.348982] tg3: eth0: Flow control is on for TX and on for RX.
[335111.361768] rfkill switch handling already scheduled, dropping this event
[335111.365882] rfkill switch handling already scheduled, dropping this event
[335112.129386] rfkill switch handling already scheduled, dropping this event
[335112.265109] rfkill switch handling already scheduled, dropping this event
[335162.160824] tg3: eth0: Link is down.
[335165.313004] tg3: eth0: Link is up at 100 Mbps, full duplex.
[335165.313011] tg3: eth0: Flow control is on for TX and on for RX.
[335400.866614] tg3: eth0: Link is down.
[335402.496751] tg3: eth0: Link is up at 100 Mbps, full duplex.
[335402.496759] tg3: eth0: Flow control is on for TX and on for RX.
[335402.590261] tg3: eth0: Link is down.
[335404.160456] tg3: eth0: Link is up at 100 Mbps, full duplex.
[335404.160464] tg3: eth0: Flow control is on for TX and on for RX.
[336282.476157] usb 3-2: new full speed USB device using uhci_hcd and address 110
[336282.656301] usb 3-2: configuration #1 chosen from 1 choice
[336282.659155] hub 3-2:1.0: USB hub found
[336282.661473] hub 3-2:1.0: 3 ports detected
[336282.950106] usb 3-2.1: new full speed USB device using uhci_hcd and address 111
[336283.092277] usb 3-2.1: configuration #1 chosen from 1 choice
[336283.127958] Registered led device: iwl-phy0::radio
[336283.129604] Registered led device: iwl-phy0::assoc
[336283.129675] Registered led device: iwl-phy0::RX
[336283.129965] Registered led device: iwl-phy0::TX
[336283.141088] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[336283.173079] usb 3-2.2: new full speed USB device using uhci_hcd and address 112
[336283.307435] usb 3-2.2: configuration #1 chosen from 1 choice
[336283.313721] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.2/3-2.2:1.0/input/input69
[336283.313907] generic-usb 0003:0A5C:4502.0037: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp] on usb-0000:00:1a.0-2.2/input0
[336283.389227] usb 3-2.3: new full speed USB device using uhci_hcd and address 113
[336283.524311] usb 3-2.3: configuration #1 chosen from 1 choice
[336283.531802] input: Broadcom Corp as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2.3/3-2.3:1.0/input/input70
[336283.531908] generic-usb 0003:0A5C:4503.0038: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp] on usb-0000:00:1a.0-2.3/input0
[336463.585081] CE: hpet increasing min_delta_ns to 33750 nsec