[   76.719492] ata1.00: configured for UDMA/133
[   76.719498] ata1: EH complete
[   90.316732] Intel AES-NI instructions are not detected.
[   90.361338] padlock: VIA PadLock not detected.
[  103.320092] Skipping EDID probe due to cached edid
[  103.800252] Skipping EDID probe due to cached edid
[  115.703368] ata1.00: configured for UDMA/133
[  115.703374] ata1: EH complete
[  136.320035] Skipping EDID probe due to cached edid
[  140.120145] lo: Disabled Privacy Extensions
[  196.614193] iwlagn 0000:0c:00.0: RF_KILL bit toggled to disable radio.
[  196.630077] iwlagn 0000:0c:00.0: Not sending command - RF KILL
[  196.630087] iwlagn 0000:0c:00.0: Error sending REPLY_RXON: enqueue_hcmd failed: -5
[  196.630095] iwlagn 0000:0c:00.0: Error setting new RXON (-5)
[  196.792595] usb 3-1: USB disconnect, address 2
[  196.792599] usb 3-1.1: USB disconnect, address 3
[  196.792821] btusb_bulk_complete: hci0 urb ffff88011a62f480 failed to resubmit (19)
[  196.793801] btusb_intr_complete: hci0 urb ffff88011a62ff00 failed to resubmit (19)
[  196.793812] btusb_bulk_complete: hci0 urb ffff88011a62f180 failed to resubmit (19)
[  196.853356] usb 3-1.2: USB disconnect, address 4
[  196.853607] usb 3-1.3: USB disconnect, address 5
[  196.854726] btusb_send_frame: hci0 urb ffff8800b3fd5900 submission failed
[  198.110859] iwlagn 0000:0c:00.0: RF_KILL bit toggled to enable radio.
[  198.680284] usb 3-1: new full speed USB device using uhci_hcd and address 6
[  198.862883] hub 3-1:1.0: USB hub found
[  198.864827] hub 3-1:1.0: 3 ports detected
[  199.132260] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  199.155012] usb 3-1.1: new full speed USB device using uhci_hcd and address 7
[  199.294503] input: HID 413c:8161 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input16
[  199.294694] generic-usb 0003:413C:8161.0004: input,hidraw1: USB HID v1.11 Keyboard [HID 413c:8161] on usb-0000:00:1a.0-1.1/input0
[  199.373823] usb 3-1.2: new full speed USB device using uhci_hcd and address 8
[  199.508790] input: HID 413c:8162 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input17
[  199.509230] generic-usb 0003:413C:8162.0005: input,hidraw2: USB HID v1.11 Mouse [HID 413c:8162] on usb-0000:00:1a.0-1.2/input0
[  200.091846] usb 3-1.3: new full speed USB device using uhci_hcd and address 9
[  247.943655] wlan0: authenticate with 00:0b:6b:78:fd:14 (try 1)
[  247.946332] wlan0: authenticated
[  247.946399] wlan0: associate with 00:0b:6b:78:fd:14 (try 1)
[  247.948532] wlan0: RX AssocResp from 00:0b:6b:78:fd:14 (capab=0x411 status=0 aid=1)
[  247.948540] wlan0: associated
[  247.951576] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  258.102511] wlan0: no IPv6 routers present
[  610.523716] EXT3-fs: barriers not enabled
[  611.076520] kjournald starting.  Commit interval 5 seconds
[  611.080578] EXT3-fs (sda9): using internal journal
[  611.080588] EXT3-fs (sda9): recovery complete
[  611.089293] EXT3-fs (sda9): mounted filesystem with ordered data mode