iwl3945 not able to connect to hidden AP after upgrade -22 -> -23

Bug #316289 reported by Tomas Pospisek
2
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
New
Undecided
Unassigned

Bug Description

Before upgrading, I could associate with my AP. After upgrading, all I get is: "ADDRCONF(NETDEV_UP): wlan0: link is not ready"

Here some more detailed infos:

0) lsb_release -rd

Description: Ubuntu 8.04.1
Release: 8.04

1) uname -a
Now: Linux tpo-laptop 2.6.24-23-generic #1 SMP Thu Nov 27 18:13:46 UTC 2008 x86_64 GNU/Linux
Before: Linux tpo-laptop 2.6.24-22-generic #1 SMP (I don't have that at hand) x86_64 GNU/Linux

2) cat /proc/version_signature
Now: Ubuntu 2.6.24-23.46-generic
Before: Ubuntu 2.6.24-22.45-generic

3) dmesg ...

The kernel log is the same after and before the upgrade, except for:
- reordering of events in the log
- timing
- various numbers, such as measured bogomips
- assigned ACPI Interrupt numbers (ACPI: PCI Interrupt 0000:18:00.0[A])

4) lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 10
 Region 0: Memory at e4600000 (64-bit, non-prefetchable) [size=1M]
 Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
 Region 4: I/O ports at 4000 [size=8]
 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
  Address: 00000000 Data: 0000
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  Bridge: PM- B3+

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Region 0: Memory at e4700000 (64-bit, non-prefetchable) [size=1M]
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  Bridge: PM- B3+

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 10
 Region 4: I/O ports at 4020 [size=32]

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 10
 Region 4: I/O ports at 4040 [size=32]

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin C routed to IRQ 18
 Region 0: Memory at e4800000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at e4804000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  Address: 0000000000000000 Data: 0000
 Capabilities: [70] Express Unknown type IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s unlimited, L1 unlimited
  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
  Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
  Link: Latency L0s <64ns, L1 <1us
  Link: ASPM Disabled CommClk- ExtSynch-
  Link: Speed unknown, Width x0

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] Express Root Port (Slot-) IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s unlimited, L1 unlimited
  Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
  Link: Latency L0s <1us, L1 <4us
  Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
  Link: Speed 2.5Gb/s, Width x0
  Root: Correctable- Non-Fatal- Fatal- PME-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4169
 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device [103c:30c0]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
 Memory behind bridge: e4100000-e41fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] Express Root Port (Slot+) IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s unlimited, L1 unlimited
  Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
  Link: Latency L0s <256ns, L1 <4us
  Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
  Link: Speed 2.5Gb/s, Width x1
  Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
  Slot: Number 2, PowerLimit 0.160000
  Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
  Slot: AttnInd Unknown, PwrInd Unknown, Power-
  Root: Correctable- Non-Fatal- Fatal- PME-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4171
 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device [103c:30c0]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=18, subordinate=18, sec-latency=0
 Memory behind bridge: e4000000-e40fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] Express Root Port (Slot+) IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s unlimited, L1 unlimited
  Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
  Link: Latency L0s <256ns, L1 <4us
  Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
  Link: Speed 2.5Gb/s, Width x1
  Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
  Slot: Number 3, PowerLimit 10.000000
  Slot: Enabled AtnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
  Slot: AttnInd Unknown, PwrInd Unknown, Power-
  Root: Correctable- Non-Fatal- Fatal- PME-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4179
 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device [103c:30c0]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=28, subordinate=28, sec-latency=0
 I/O behind bridge: 00002000-00003fff
 Memory behind bridge: e0000000-e3ffffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [40] Express Root Port (Slot+) IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s unlimited, L1 unlimited
  Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 5
  Link: Latency L0s <1us, L1 <4us
  Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
  Link: Speed 2.5Gb/s, Width x0
  Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
  Slot: Number 5, PowerLimit 0.160000
  Slot: Enabled AtnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
  Slot: AttnInd Unknown, PwrInd Unknown, Power-
  Root: Correctable- Non-Fatal- Fatal- PME-
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  Address: fee0300c Data: 4181
 Capabilities: [90] Subsystem: Hewlett-Packard Company Unknown device [103c:30c0]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 10
 Region 4: I/O ports at 4060 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 10
 Region 4: I/O ports at 4080 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin C routed to IRQ 11
 Region 4: I/O ports at 40a0 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 20
 Region 0: Memory at e4808000 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Bus: primary=00, secondary=02, subordinate=03, sec-latency=32
 Memory behind bridge: e4200000-e45fffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
 Capabilities: [50] Subsystem: Hewlett-Packard Company Unknown device [103c:30c0]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 16
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at 40c0 [size=16]

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:30c0]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 507
 Region 0: I/O ports at 13f0 [size=8]
 Region 1: I/O ports at 15f4 [size=4]
 Region 2: I/O ports at 1370 [size=8]
 Region 3: I/O ports at 1574 [size=4]
 Region 4: I/O ports at 4100 [size=32]
 Region 5: Memory at e4809000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 Enable+
  Address: fee0300c Data: 4191
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [a8] #12 [0010]

02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6)
 Subsystem: Hewlett-Packard Company Unknown device [103c:30c0]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 64
 Interrupt: pin A routed to IRQ 16
 Region 0: Memory at e4200000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
 Memory window 0: 88000000-8bfff000 (prefetchable)
 Memory window 1: 8c000000-8ffff000 (prefetchable)
 I/O window 0: 00001400-000014ff
 I/O window 1: 00001800-000018ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001

02:04.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 02) (prog-if 10 [OHCI])
 Subsystem: Hewlett-Packard Company Unknown device [103c:30c0]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
 Interrupt: pin B routed to IRQ 17
 Region 0: Memory at e4201000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME+

10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
 Subsystem: Hewlett-Packard Company Compaq 6710b [103c:135c]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 506
 Region 0: Memory at e4100000 (32-bit, non-prefetchable) [size=4K]
 Capabilities: [c8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 4199
 Capabilities: [e0] Express Legacy Endpoint IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
  Device: Latency L0s <512ns, L1 unlimited
  Device: AtnBtn- AtnInd- PwrInd-
  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
  Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
  Link: Latency L0s <128ns, L1 <64us
  Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
  Link: Speed 2.5Gb/s, Width x1

18:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
 Subsystem: Hewlett-Packard Company 6710b [103c:30c0]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 505
 Region 0: Memory at e4000000 (64-bit, non-prefetchable) [size=64K]
 Expansion ROM at <ignored> [disabled]
 Capabilities: [48] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=1 PME-
 Capabilities: [50] Vital Product Data
 Capabilities: [58] Vendor Specific Information
 Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  Address: 00000000fee0300c Data: 41a1
 Capabilities: [d0] Express Endpoint IRQ 0
  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
  Device: Latency L0s <4us, L1 unlimited
  Device: AtnBtn- AtnInd- PwrInd-
  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
  Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
  Link: Latency L0s <4us, L1 <64us
  Link: ASPM L1 Enabled RCB 64 bytes CommClk+ ExtSynch-
  Link: Speed 2.5Gb/s, Width x1

wlan related messages in kernel log.

Before:

Jan 12 07:49:50 tpo-laptop kernel: [ 47.385162] NET: Registered protocol family 17
Jan 12 07:50:00 tpo-laptop kernel: [ 47.647132] wlan0: Initial auth_alg=0
Jan 12 07:50:00 tpo-laptop kernel: [ 47.647142] wlan0: authenticate with AP 00:17:f2:e1:cd:49
Jan 12 07:50:00 tpo-laptop kernel: [ 47.651589] wlan0: authenticate with AP 00:17:f2:e1:cd:49
Jan 12 07:50:00 tpo-laptop kernel: [ 47.651971] wlan0: RX authentication from 00:17:f2:e1:cd:49 (alg=0 transaction=2 status=0)
Jan 12 07:50:00 tpo-laptop kernel: [ 47.651978] wlan0: authenticated
Jan 12 07:50:00 tpo-laptop kernel: [ 47.651983] wlan0: associate with AP 00:17:f2:e1:cd:49
Jan 12 07:50:00 tpo-laptop kernel: [ 47.652763] wlan0: RX AssocResp from 00:17:f2:e1:cd:49 (capab=0x411 status=0 aid=1)
Jan 12 07:50:00 tpo-laptop kernel: [ 47.652769] wlan0: associated
Jan 12 07:50:00 tpo-laptop kernel: [ 47.658586] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 12 07:50:06 tpo-laptop kernel: [ 51.659240] wlan0: no IPv6 routers present

After:

Jan 12 08:00:18 tpo-laptop kernel: [ 52.431095] NET: Registered protocol family 17
Jan 12 08:01:33 tpo-laptop kernel: [ 59.549021] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 12 08:02:31 tpo-laptop kernel: [ 62.986149] CPU0 attaching NULL sched-domain.
Jan 12 08:02:31 tpo-laptop kernel: [ 62.986154] CPU1 attaching NULL sched-domain.
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009339] CPU0 attaching sched-domain:
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009345] domain 0: span 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009347] groups: 01 02
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009352] domain 1: span 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009354] groups: 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009357] domain 2: span 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009360] groups: 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009362] CPU1 attaching sched-domain:
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009365] domain 0: span 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009367] groups: 02 01
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009371] domain 1: span 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009373] groups: 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009376] domain 2: span 03
Jan 12 08:02:31 tpo-laptop kernel: [ 63.009378] groups: 03
Jan 12 08:02:32 tpo-laptop kernel: [ 63.885864] Monitor-Mwait will be used to enter C-2 state
Jan 12 08:02:32 tpo-laptop kernel: [ 63.885874] Monitor-Mwait will be used to enter C-3 state
Jan 12 08:02:40 tpo-laptop kernel: [ 65.815148] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 12 08:08:56 tpo-laptop kernel: [ 94.237593] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 12 08:09:45 tpo-laptop kernel: [ 102.689417] ip6_tables: (C) 2000-2006 Netfilter Core Team

ProblemType: Bug
Architecture: amd64
Date: Mon Jan 12 09:31:18 2009
Dependencies:

DistroRelease: Ubuntu 8.04
Package: linux None [modified: /var/lib/dpkg/info/linux.list]
PackageArchitecture: amd64
ProcEnviron:
 PATH=/home/username/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
 LANG=de_CH.UTF-8
 SHELL=/bin/bash
SourcePackage: linux-meta
Uname: Linux 2.6.24-23-generic x86_64

Revision history for this message
Tomas Pospisek (tpo-deb) wrote :

(Before Ubuntu's auto-brain-dammage robot comes around and automatically deletes aka puts the bug status to "Invalid" due to missing comment churn here) I want to reconfirm that -23 has a **regression** versus -22 in that the iwl3945 WLAN driver *fails* to associate with APs that do not advertise their SSID.

I've just incidentally booted into the current Ubuntu kernel and was again no more able to connect to my AP. Reverting back to -22 instantly connected me to the internet.
*t

Revision history for this message
Leann Ogasawara (leannogasawara) wrote :

Thanks Tomas. I'm going to mark this as a duplicate of bug 327431 which appears to be the same regression. It's easier for the kernel team to have one master bug to work from. Please continue to track this issue at that report and add any additional information. Thanks.

To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.