NVIDIA MCP67 chipset's problems with 2.6.27.7 kernel
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Ubuntu |
Invalid
|
Undecided
|
Unassigned |
Bug Description
2.6.24-
2.6.27-3-rt is ok ,but AMD tk-53 can't work with duel core
2.6.27-7-generic load very abnormally , if the blank-place button being pressed when loading , It can go on ,but very slowly!
maybe, the problem is sata hdd , indeed 2.6.24-
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-7-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #1 SMP Fri Oct 24 06:42:44 UTC 2008 (Ubuntu 2.6.27-
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000006ff50000 (usable)
[ 0.000000] BIOS-e820: 000000006ff50000 - 000000006ff65000 (ACPI data)
[ 0.000000] BIOS-e820: 000000006ff65000 - 000000006ff66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000006ff66000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] last_pfn = 0x6ff50 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 7000-c000
[ 0.000000] RAMDISK: 6f727000 - 6ff3fda0
[ 0.000000] Allocated new RAMDISK: 005c4000 - 00ddcda0
[ 0.000000] Move RAMDISK from 000000006f727000 - 000000006ff3fd9f to 005c4000 - 00ddcd9f
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F8240, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 6FF5FC98, 0074 (r1 Tsing TONGFANG 6040000 LTP 0)
[ 0.000000] ACPI: FACP 6FF648F8, 00F4 (r3 NVIDIA MCP67-M 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT 6FF5FD0C, 4B78 (r1 NVIDIA MCP67 6040000 MSFT 3000000)
[ 0.000000] ACPI: FACS 6FF65FC0, 0040
[ 0.000000] ACPI: TCPA 6FF649EC, 0032 (r1 Phoeni x 6040000 TL 0)
[ 0.000000] ACPI: SRAT 6FF64A1E, 00A0 (r1 AMD HAMMER 6040000 AMD 1)
[ 0.000000] ACPI: WDAT 6FF64ABE, 0104 (r1 PTLTD WDATTBL 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 6FF64BC2, 01C4 (r1 PTLTD POWERNOW 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 6FF64D86, 0176 (r1 Tsing TONGFANG 6040000 0)
[ 0.000000] ACPI: MCFG 6FF64EFC, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: HPET 6FF64F38, 0038 (r1 PTLTD HPETTBL 6040000 LTP 1)
[ 0.000000] ACPI: APIC 6FF64F70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 6FF64FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] 895MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00008000 - 0000f000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c0a20] TEXT DATA BSS ==> [0000100000 - 00005c0a20]
[ 0.000000] #4 [00005c1000 - 00005c4000] INIT_PG_TABLE ==> [00005c1000 - 00005c4000]
[ 0.000000] #5 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00005c4000 - 0000ddcda0] NEW RAMDISK ==> [00005c4000 - 0000ddcda0]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] found SMP MP-table at [c00f81b0] 000f81b0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0006ff50
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0006ff50
[ 0.000000] On node 0 totalpages: 458478
[ 0.000000] free_area_
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 227185 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454447
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1700.116 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1802736k/1834304k available (2572k kernel code, 30236k reserved, 1160k data, 424k init, 916800k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ab000 - 0xc0515000 ( 424 kB)
[ 0.004000] .data : 0xc038329a - 0xc04a5680 (1160 kB)
[ 0.004000] .text : 0xc0100000 - 0xc038329a (2572 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3400.23 BogoMIPS (lpj=6800464)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004000] CPU 0(2) -> Core 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017891] ACPI: Core revision 20080609
[ 0.019671] ACPI: Checking initramfs for custom DSDT
[ 0.432336] ENABLING IO-APIC IRQs
[ 0.432573] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.472533] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
[ 0.476029] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3400.33 BogoMIPS (lpj=6800671)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004000] CPU 1(2) -> Core 1
[ 0.560225] CPU1: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53 stepping 01
[ 0.560268] Brought up 2 CPUs
[ 0.560271] Total of 2 processors activated (6800.56 BogoMIPS).
[ 0.560264] System has AMD C1E enabled
[ 0.560264] Switch to broadcast mode on CPU1
[ 0.560314] CPU0 attaching sched-domain:
[ 0.560318] domain 0: span 0-1 level CPU
[ 0.560321] groups: 0 1
[ 0.560328] CPU1 attaching sched-domain:
[ 0.560331] domain 0: span 0-1 level CPU
[ 0.560334] groups: 1 0
[ 0.560430] Switch to broadcast mode on CPU0
[ 0.560430] net_namespace: 840 bytes
[ 0.560430] Booting paravirtualized kernel on bare hardware
[ 0.560430] Time: 23:05:32 Date: 10/25/08
[ 0.560430] NET: Registered protocol family 16
[ 0.560430] EISA bus registered
[ 0.560430] ACPI: bus type pci registered
[ 0.560430] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 7
[ 0.560430] PCI: MCFG area at e0000000 reserved in E820
[ 0.560430] PCI: Using MMCONFIG for extended config space
[ 0.560430] PCI: Using configuration type 1 for base access
[ 0.560734] ACPI: EC: Look up EC in DSDT
[ 0.566462] ACPI: Interpreter enabled
[ 0.566466] ACPI: (supports S0 S3 S4 S5)
[ 0.566485] ACPI: Using IOAPIC for interrupt routing
[ 0.572169] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.588188] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.588188] ACPI: EC: driver started in interrupt mode
[ 0.588199] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.588251] PCI: 0000:00:01.1 reg 10 io port: [3080, 30bf]
[ 0.588264] PCI: 0000:00:01.1 reg 20 io port: [3040, 307f]
[ 0.588269] PCI: 0000:00:01.1 reg 24 io port: [3000, 303f]
[ 0.588286] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.588293] pci 0000:00:01.1: PME# disabled
[ 0.588315] PCI: 0000:00:02.0 reg 10 32bit mmio: [b0006000, b0006fff]
[ 0.588339] pci 0000:00:02.0: supports D1
[ 0.588341] pci 0000:00:02.0: supports D2
[ 0.588344] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588348] pci 0000:00:02.0: PME# disabled
[ 0.588370] PCI: 0000:00:02.1 reg 10 32bit mmio: [b0007000, b00070ff]
[ 0.588396] pci 0000:00:02.1: supports D1
[ 0.588398] pci 0000:00:02.1: supports D2
[ 0.588401] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588405] pci 0000:00:02.1: PME# disabled
[ 0.588428] PCI: 0000:00:04.0 reg 10 32bit mmio: [b0008000, b0008fff]
[ 0.588451] pci 0000:00:04.0: supports D1
[ 0.588453] pci 0000:00:04.0: supports D2
[ 0.588455] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588460] pci 0000:00:04.0: PME# disabled
[ 0.588465] PCI: 0000:00:04.1 reg 10 32bit mmio: [b0007400, b00074ff]
[ 0.588465] pci 0000:00:04.1: supports D1
[ 0.588465] pci 0000:00:04.1: supports D2
[ 0.588465] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588465] pci 0000:00:04.1: PME# disabled
[ 0.588465] PCI: 0000:00:06.0 reg 20 io port: [30c0, 30cf]
[ 0.588465] PCI: 0000:00:07.0 reg 10 32bit mmio: [b0000000, b0003fff]
[ 0.588465] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.588465] pci 0000:00:07.0: PME# disabled
[ 0.588465] PCI: 0000:00:09.0 reg 10 io port: [30f0, 30f7]
[ 0.588465] PCI: 0000:00:09.0 reg 14 io port: [30e4, 30e7]
[ 0.588465] PCI: 0000:00:09.0 reg 18 io port: [30e8, 30ef]
[ 0.588465] PCI: 0000:00:09.0 reg 1c io port: [30e0, 30e3]
[ 0.588465] PCI: 0000:00:09.0 reg 20 io port: [30d0, 30df]
[ 0.588465] PCI: 0000:00:09.0 reg 24 32bit mmio: [b0004000, b0005fff]
[ 0.588465] PCI: 0000:00:0a.0 reg 10 32bit mmio: [b0009000, b0009fff]
[ 0.588465] PCI: 0000:00:0a.0 reg 14 io port: [30f8, 30ff]
[ 0.588465] PCI: 0000:00:0a.0 reg 18 32bit mmio: [b0007c00, b0007cff]
[ 0.588465] PCI: 0000:00:0a.0 reg 1c 32bit mmio: [b0007800, b000780f]
[ 0.588465] pci 0000:00:0a.0: supports D1
[ 0.588465] pci 0000:00:0a.0: supports D2
[ 0.588465] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588465] pci 0000:00:0a.0: PME# disabled
[ 0.588465] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588465] pci 0000:00:0c.0: PME# disabled
[ 0.588465] PCI: 0000:00:12.0 reg 10 32bit mmio: [b2000000, b2ffffff]
[ 0.588465] PCI: 0000:00:12.0 reg 14 32bit mmio: [c0000000, cfffffff]
[ 0.588465] PCI: 0000:00:12.0 reg 1c 64bit mmio: [b1000000, b1ffffff]
[ 0.588465] PCI: 0000:00:12.0 reg 30 32bit mmio: [0, 1ffff]
[ 0.588550] PCI: 0000:01:05.0 reg 10 32bit mmio: [b3000000, b30007ff]
[ 0.588583] pci 0000:01:05.0: supports D1
[ 0.588586] pci 0000:01:05.0: supports D2
[ 0.588588] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588593] pci 0000:01:05.0: PME# disabled
[ 0.588615] PCI: 0000:01:05.1 reg 10 32bit mmio: [b3000800, b30008ff]
[ 0.588648] pci 0000:01:05.1: supports D1
[ 0.588650] pci 0000:01:05.1: supports D2
[ 0.588653] pci 0000:01:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588657] pci 0000:01:05.1: PME# disabled
[ 0.588680] PCI: 0000:01:05.2 reg 10 32bit mmio: [b3000c00, b3000cff]
[ 0.588713] pci 0000:01:05.2: supports D1
[ 0.588715] pci 0000:01:05.2: supports D2
[ 0.588718] pci 0000:01:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.588722] pci 0000:01:05.2: PME# disabled
[ 0.588756] pci 0000:00:08.0: transparent bridge
[ 0.588761] PCI: bridge 0000:00:08.0 32bit mmio: [b3000000, b30fffff]
[ 0.588804] PCI: bridge 0000:00:0c.0 io port: [4000, 4fff]
[ 0.588807] PCI: bridge 0000:00:0c.0 32bit mmio: [b3200000, b33fffff]
[ 0.588812] PCI: bridge 0000:00:0c.0 64bit mmio pref: [d0000000, d01fffff]
[ 0.588820] bus 00 -> node 0
[ 0.588828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.588950] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.588993] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.621641] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.621641] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *10 11 14 15)
[ 0.621641] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 *11 14 15)
[ 0.621641] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.621641] ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.621641] ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.621641] ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.621641] ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.621641] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.621641] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.621771] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.622034] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.622290] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.622546] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.622802] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.623059] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.623315] ACPI: PCI Interrupt Link [Z002] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.623575] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.623836] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.624201] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.624271] pnp: PnP ACPI init
[ 0.624288] ACPI: bus type pnp registered
[ 0.632114] pnp: PnP ACPI: found 12 devices
[ 0.632118] ACPI: ACPI bus type pnp unregistered
[ 0.632123] PnPBIOS: Disabled by ACPI PNP
[ 0.632157] PCI: Using ACPI for IRQ routing
[ 0.636045] NET: Registered protocol family 8
[ 0.636049] NET: Registered protocol family 20
[ 0.640041] NetLabel: Initializing
[ 0.640041] NetLabel: domain hash size = 128
[ 0.640042] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.640058] NetLabel: unlabeled traffic allowed by default
[ 0.640067] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.640073] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.641785] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.641788] actual entries 65620
[ 0.641936] AppArmor: AppArmor Filesystem Enabled
[ 0.641969] ACPI: RTC can wake from S4
[ 0.644054] Switched to high resolution mode on CPU 0
[ 0.644066] Switched to high resolution mode on CPU 1
[ 0.644107] system 00:02: iomem range 0xe0000000-
[ 0.644117] system 00:03: ioport range 0x1000-0x107f has been reserved
[ 0.644120] system 00:03: ioport range 0x1080-0x10ff has been reserved
[ 0.644124] system 00:03: ioport range 0x1400-0x147f has been reserved
[ 0.644128] system 00:03: ioport range 0x1480-0x14ff has been reserved
[ 0.644131] system 00:03: ioport range 0x1800-0x187f has been reserved
[ 0.644135] system 00:03: ioport range 0x1880-0x18ff has been reserved
[ 0.644144] system 00:06: ioport range 0x360-0x361 has been reserved
[ 0.644148] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.644159] system 00:0b: iomem range 0xffc00000-
[ 0.644163] system 00:0b: iomem range 0xfec00000-
[ 0.644167] system 00:0b: iomem range 0xfee00000-
[ 0.644171] system 00:0b: iomem range 0xfed00000-
[ 0.644175] system 00:0b: iomem range 0xfec80000-
[ 0.644179] system 00:0b: iomem range 0xfef00000-
[ 0.679631] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.679635] pci 0000:00:08.0: IO window: disabled
[ 0.679640] pci 0000:00:08.0: MEM window: 0xb3000000-
[ 0.679644] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.679649] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04
[ 0.679653] pci 0000:00:0c.0: IO window: 0x4000-0x4fff
[ 0.679657] pci 0000:00:0c.0: MEM window: 0xb3200000-
[ 0.679661] pci 0000:00:0c.0: PREFETCH window: 0x000000d000000
[ 0.679673] pci 0000:00:08.0: setting latency timer to 64
[ 0.679679] pci 0000:00:0c.0: setting latency timer to 64
[ 0.679683] bus: 00 index 0 io port: [0, ffff]
[ 0.679686] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.679688] bus: 01 index 0 mmio: [0, 0]
[ 0.679691] bus: 01 index 1 mmio: [b3000000, b30fffff]
[ 0.679694] bus: 01 index 2 mmio: [0, 0]
[ 0.679697] bus: 01 index 3 io port: [0, ffff]
[ 0.679699] bus: 01 index 4 mmio: [0, ffffffff]
[ 0.679702] bus: 04 index 0 io port: [4000, 4fff]
[ 0.679705] bus: 04 index 1 mmio: [b3200000, b33fffff]
[ 0.679707] bus: 04 index 2 mmio: [d0000000, d01fffff]
[ 0.679710] bus: 04 index 3 mmio: [0, 0]
[ 0.679725] NET: Registered protocol family 2
[ 0.689088] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.689420] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.690030] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.690332] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.690336] TCP reno registered
[ 0.693122] NET: Registered protocol family 1
[ 0.693270] checking if image is initramfs... it is
[ 1.541926] Freeing initrd memory: 8291k freed
[ 1.542104] Simple Boot Flag at 0x36 set to 0x1
[ 1.543613] audit: initializing netlink socket (disabled)
[ 1.543629] type=2000 audit(122497593
[ 1.550747] highmem bounce pool size: 64 pages
[ 1.550755] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.554193] VFS: Disk quotas dquot_6.5.1
[ 1.554315] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.554453] msgmni has been set to 1748
[ 1.554614] io scheduler noop registered
[ 1.554617] io scheduler anticipatory registered
[ 1.554620] io scheduler deadline registered
[ 1.554634] io scheduler cfq registered (default)
[ 1.554670] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.959543] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.959560] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.959578] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.959597] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.959614] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 1.959631] pci 0000:00:12.0: Boot video device
[ 1.959844] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 1.959871] pcieport-driver 0000:00:0c.0: found MSI capability
[ 1.959896] pci_express 0000:00:
[ 1.959969] pci_express 0000:00:
[ 1.960410] isapnp: Scanning for PnP cards...
[ 2.313016] isapnp: No Plug & Play device found
[ 2.364802] hpet_resources: 0xfed00000 is busy
[ 2.364933] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.368225] brd: module loaded
[ 2.368323] input: Macintosh mouse button emulation as /devices/
[ 2.368495] PNP: PS/2 Controller [PNP0303:
[ 2.381647] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 2.390327] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.390335] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.390338] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.390342] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.390345] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.390833] mice: PS/2 mouse device common for all mice
[ 2.391030] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 2.391069] rtc0: alarms up to one year, y3k, hpet irqs
[ 2.391231] EISA: Probing bus 0 at eisa.0
[ 2.391238] Cannot allocate resource for EISA slot 1
[ 2.391244] Cannot allocate resource for EISA slot 3
[ 2.391247] Cannot allocate resource for EISA slot 4
[ 2.391261] EISA: Detected 0 cards.
[ 2.391266] cpuidle: using governor ladder
[ 2.391268] cpuidle: using governor menu
[ 2.391868] TCP cubic registered
[ 2.391901] Using IPI No-Shortcut mode
[ 2.392260] registered taskstats version 1
[ 2.392409] Magic number: 12:856:100
[ 2.392588] rtc_cmos 00:09: setting system clock to 2008-10-25 23:05:34 UTC (1224975934)
[ 2.392592] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.392594] EDD information not available.
[ 2.392910] Freeing unused kernel memory: 424k freed
[ 2.392988] Write protecting the kernel text: 2576k
[ 2.393073] Write protecting the kernel read-only data: 936k
[ 2.422778] input: AT Translated Set 2 keyboard as /devices/
[ 2.481699] compcache: Compressed swap size set to: 453100 KB
[ 2.482560] TLSF: pool: f882e000, init_size=16384, max_size=0, grow_size=16384
[ 2.597326] fuse init (API version 7.9)
[ 2.649847] ACPI: processor limited to max C-state 1
[ 2.665118] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.665194] processor ACPI0007:00: registered as cooling_device0
[ 2.665200] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.665374] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.665431] processor ACPI0007:01: registered as cooling_device1
[ 2.665436] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.670109] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.673801] ACPI: Thermal Zone [THZN] (66 C)
[ 3.195071] usbcore: registered new interface driver usbfs
[ 3.195105] usbcore: registered new interface driver hub
[ 3.206756] usbcore: registered new device driver usb
[ 3.206993] No dock devices found.
[ 3.234922] SCSI subsystem initialized
[ 3.260838] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 23
[ 3.260852] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 23 (level, low) -> IRQ 23
[ 3.260867] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 3.260871] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 3.260935] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 3.260967] ehci_hcd 0000:00:02.1: debug port 1
[ 3.260973] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 3.260991] ehci_hcd 0000:00:02.1: irq 23, io mem 0xb0007000
[ 3.261075] libata version 3.00 loaded.
[ 3.261221] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.273043] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.273247] usb usb1: configuration #1 chosen from 1 choice
[ 3.273280] hub 1-0:1.0: USB hub found
[ 3.273291] hub 1-0:1.0: 5 ports detected
[ 3.447116] Adding 453096k swap on /dev/ramzswap0. Priority:100 extents:1 across:453096k
[ 3.481826] ACPI: PCI Interrupt Link [Z003] enabled at IRQ 22
[ 3.481842] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z003] -> GSI 22 (level, low) -> IRQ 22
[ 3.481860] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 3.481864] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 3.481896] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 3.481929] ehci_hcd 0000:00:04.1: debug port 1
[ 3.481934] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 3.481954] ehci_hcd 0000:00:04.1: irq 22, io mem 0xb0007400
[ 3.493058] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.493282] usb usb2: configuration #1 chosen from 1 choice
[ 3.493320] hub 2-0:1.0: USB hub found
[ 3.493332] hub 2-0:1.0: 5 ports detected
[ 3.597804] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
[ 3.597820] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 21 (level, low) -> IRQ 21
[ 3.597837] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 3.597841] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 3.597873] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 3.597904] ohci_hcd 0000:00:02.0: irq 21, io mem 0xb0006000
[ 3.655333] usb usb3: configuration #1 chosen from 1 choice
[ 3.655368] hub 3-0:1.0: USB hub found
[ 3.655381] hub 3-0:1.0: 5 ports detected
[ 3.861821] ACPI: PCI Interrupt Link [Z002] enabled at IRQ 20
[ 3.861836] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z002] -> GSI 20 (level, low) -> IRQ 20
[ 3.861856] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 3.861860] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 3.861892] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 3.861922] ohci_hcd 0000:00:04.0: irq 20, io mem 0xb0008000
[ 3.919314] usb usb4: configuration #1 chosen from 1 choice
[ 3.919351] hub 4-0:1.0: USB hub found
[ 3.919365] hub 4-0:1.0: 5 ports detected
[ 4.202487] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 4.203077] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 19
[ 4.203089] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
[ 4.203123] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 4.203132] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 4.203187] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 4.203638] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 18
[ 4.203652] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 18 (level, low) -> IRQ 18
[ 4.203662] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 5.759652] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 8.872983] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 04:4b:80:5e:43:ad
[ 8.872989] forcedeth 0000:00:0a.0: highdma pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 8.875428] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[ 8.875445] ohci1394 0000:01:05.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 8.927198] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[b3000000-
[ 8.936367] pata_amd 0000:00:06.0: version 0.3.10
[ 8.936425] pata_amd 0000:00:06.0: setting latency timer to 64
[ 8.936507] scsi0 : pata_amd
[ 8.936658] scsi1 : pata_amd
[ 8.937218] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 8.937222] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 21.847711] ata1.00: ATAPI: TSSTcorpCDW/DVD TS-L462D, CH00, max UDMA/33
[ 21.847733] ata1: nv_mode_filter: 0x739f&
[ 21.853032] Clocksource tsc unstable (delta = 4398046174153 ns)
[ 34.045605] usb 3-1: configuration #1 chosen from 1 choice
[ 34.052289] ata1.00: configured for UDMA/33
[ 34.052347] ata2: port disabled. ignoring.
[ 34.070361] usbcore: registered new interface driver hiddev
[ 34.076423] input: USB Mouse as /devices/
[ 34.082275] scsi 0:0:0:0: CD-ROM TSSTcorp CDW/DVD TS-L462D CH00 PQ: 0 ANSI: 5
[ 34.082532] ahci 0000:00:09.0: version 3.0
[ 34.082548] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 19 (level, low) -> IRQ 19
[ 34.082653] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 34.082658] ahci 0000:00:09.0: flags: 64bit sntf led clo pmp pio slum part
[ 34.082663] ahci 0000:00:09.0: setting latency timer to 64
[ 34.086041] scsi2 : ahci
[ 34.086298] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:02.0-1
[ 34.086324] usbcore: registered new interface driver usbhid
[ 34.086328] usbhid: v2.6:USB HID core driver
[ 34.086445] scsi3 : ahci
[ 34.086777] scsi4 : ahci
[ 34.086885] scsi5 : ahci
[ 34.087011] ata3: SATA max UDMA/133 abar m8192@0xb0004000 port 0xb0004100 irq 222
[ 34.087015] ata4: SATA max UDMA/133 abar m8192@0xb0004000 port 0xb0004180 irq 222
[ 34.087019] ata5: SATA max UDMA/133 abar m8192@0xb0004000 port 0xb0004200 irq 222
[ 34.087023] ata6: SATA max UDMA/133 abar m8192@0xb0004000 port 0xb0004280 irq 222
[ 34.691082] ieee1394: Host added: ID:BUS[0-00:1023] GUID[5e804b0400
[ 35.463458] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 35.759591] ata3.00: ATA-8: WDC WD1600BEVS-22UST0, 01.01A01, max UDMA/133
[ 35.759596] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 35.760421] ata3.00: configured for UDMA/133
[ 37.135028] ata4: SATA link down (SStatus 0 SControl 300)
[ 38.211411] ata5: SATA link down (SStatus 0 SControl 300)
[ 38.806273] ata6: SATA link down (SStatus 0 SControl 300)
[ 38.806424] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 01.0 PQ: 0 ANSI: 5
[ 38.819252] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 38.819308] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[ 38.850437] Driver 'sr' needs updating - please use bus_type methods
[ 38.862691] Driver 'sd' needs updating - please use bus_type methods
[ 38.946736] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 38.946743] Uniform CD-ROM driver Revision: 3.20
[ 38.946866] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 38.949196] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 38.949221] sd 2:0:0:0: [sda] Write Protect is off
[ 38.949224] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.949259] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.949357] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 38.949377] sd 2:0:0:0: [sda] Write Protect is off
[ 38.949380] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 38.949414] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 38.949420] sda: sda1 sda2 sda3 sda4
[ 39.021014] sd 2:0:0:0: [sda] Attached SCSI disk
[ 49.924052] kjournald starting. Commit interval 5 seconds
[ 49.924074] EXT3-fs: mounted filesystem with ordered data mode.
[ 90.068071] udevd version 124 started
[ 90.622841] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 90.652103] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 90.885630] input: Power Button (FF) as /devices/
[ 90.909030] ACPI: Power Button (FF) [PWRF]
[ 90.909225] input: Lid Switch as /devices/
[ 90.914075] ACPI: Lid Switch [LID0]
[ 90.914180] input: Power Button (CM) as /devices/
[ 90.941028] ACPI: Power Button (CM) [PWRB]
[ 90.941174] input: Sleep Button (CM) as /devices/
[ 90.975547] ACPI: Sleep Button (CM) [SLPB]
[ 91.006126] ACPI: AC Adapter [AC0] (on-line)
[ 91.163751] udev: renamed network interface eth0 to eth1
[ 91.361458] sdhci: Secure Digital Host Controller Interface driver
[ 91.361463] sdhci: Copyright(c) Pierre Ossman
[ 91.485573] sdhci-pci 0000:01:05.1: SDHCI controller found [1180:0822] (rev 19)
[ 91.486046] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
[ 91.486060] sdhci-pci 0000:01:05.1: PCI INT B -> Link[LNK3] -> GSI 11 (level, low) -> IRQ 11
[ 91.489283] mmc0: SDHCI controller on PCI [0000:01:05.1] using PIO
[ 92.226291] ACPI: Battery Slot [BAT0] (battery present)
[ 92.226515] acpi device:09: registered as cooling_device2
[ 92.226695] input: Video Bus as /devices/
[ 92.257105] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 92.357908] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 17
[ 92.357923] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 17 (level, low) -> IRQ 17
[ 92.357992] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 92.415498] input: PC Speaker as /devices/
[ 93.766783] input: ImPS/2 Logitech Wheel Mouse as /devices/
[ 94.944309] lp: driver loaded but no devices found
[ 95.161567] Adding 2048276k swap on /dev/sda4. Priority:-1 extents:1 across:2048276k
[ 95.765603] EXT3 FS on sda3, internal journal
[ 98.149777] type=1505 audit(122494723
[ 98.150060] type=1505 audit(122494723
[ 98.358309] ip_tables: (C) 2000-2006 Netfilter Core Team
hardware information are as follows:
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory:0
physical id: 3
size: 1769MiB
*-cpu
product: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-53
vendor: Advanced Micro Devices [AMD]
physical id: 5
bus info: cpu@0
version: 15.8.1
size: 800MHz
capacity: 800MHz
width: 64 bits
*-cache:0
size: 128KiB
*-cache:1
size: 256KiB
*-memory:1 UNCLAIMED
product: MCP67 Memory Controller
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:00:00.0
version: a2
width: 32 bits
clock: 66MHz (15.2ns)
*-isa
product: MCP67 ISA Bridge
vendor: nVidia Corporation
physical id: 1
bus info: pci@0000:00:01.0
version: a2
width: 32 bits
clock: 66MHz
*-serial UNCLAIMED
product: MCP67 SMBus
vendor: nVidia Corporation
physical id: 1.1
bus info: pci@0000:00:01.1
version: a2
width: 32 bits
clock: 66MHz
*-usb:0
product: MCP67 OHCI USB 1.1 Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
*-usbhost
bus info: usb@3
*-usb
bus info: usb@3:1
*-usb:1
product: MCP67 EHCI USB 2.0 Controller
vendor: nVidia Corporation
physical id: 2.1
bus info: pci@0000:00:02.1
version: a2
width: 32 bits
clock: 66MHz
*-usbhost
bus info: usb@1
*-usb:2
product: MCP67 OHCI USB 1.1 Controller
vendor: nVidia Corporation
physical id: 4
bus info: pci@0000:00:04.0
version: a2
width: 32 bits
clock: 66MHz
*-usbhost
bus info: usb@4
*-usb:3
product: MCP67 EHCI USB 2.0 Controller
vendor: nVidia Corporation
physical id: 4.1
bus info: pci@0000:00:04.1
version: a2
width: 32 bits
clock: 66MHz
*-usbhost
bus info: usb@2
*-ide:0
product: MCP67 IDE Controller
vendor: nVidia Corporation
physical id: 6
bus info: pci@0000:00:06.0
logical name: scsi0
version: a1
width: 32 bits
clock: 66MHz
*-cdrom
bus info: scsi@0:0.0.0
*-multimedia
product: MCP67 High Definition Audio
vendor: nVidia Corporation
physical id: 7
bus info: pci@0000:00:07.0
version: a1
width: 32 bits
clock: 66MHz
*-pci:0
product: MCP67 PCI Bridge
vendor: nVidia Corporation
physical id: 8
bus info: pci@0000:00:08.0
version: a2
width: 32 bits
clock: 66MHz
*-firewire
bus info: pci@0000:01:05.0
width: 32 bits
clock: 33MHz
*-system:0
bus info: pci@0000:01:05.1
width: 32 bits
clock: 33MHz
*-system:1 UNCLAIMED
bus info: pci@0000:01:05.2
width: 32 bits
clock: 33MHz
*-ide:1
product: MCP67 AHCI Controller
vendor: nVidia Corporation
physical id: 9
bus info: pci@0000:00:09.0
version: a2
width: 32 bits
clock: 66MHz
*-network
product: MCP67 Ethernet
vendor: nVidia Corporation
physical id: a
bus info: pci@0000:00:0a.0
logical name: eth1
version: a2
serial: 04:43:82:5d:40:ae
width: 32 bits
clock: 66MHz
*-pci:1
product: MCP67 PCI Express Bridge
vendor: nVidia Corporation
physical id: c
bus info: pci@0000:00:0c.0
version: a2
width: 32 bits
clock: 33MHz
*-display
product: GeForce 7000M (rev a2)
vendor: nVidia Corporation
physical id: 12
bus info: pci@0000:00:12.0
version: a2
width: 64 bits
clock: 66MHz
*-pci:2
product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 100
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
product: K8 [Athlon64/Opteron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
product: K8 [Athlon64/Opteron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
product: K8 [Athlon64/Opteron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
*-network DISABLED
description: Ethernet interface
physical id: 1
logical name: pan0
serial: d6:e3:51:47:be:93
Sata Hdd information with 2.6.24-21-generic or 2.6.24-20-generic:
product: MCP67 OHCI USB 1.1 Controller
vendor: nVidia Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: a2
width: 32 bits
clock: 66MHz
capabilities: pm ohci bus_master cap_list
configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3 module=ohci_hcd