Well, I don't think the rfkill status is related to the driver. It is an interaction with the 
bios as far as I know... 

But thanks for your input :) 


De: "Cypher2" <email address hidden> 
À: "Daniel Cardin" <email address hidden> 
Envoyé: Mardi 12 Octobre 2010 09:31:30 
Objet: Re: [Bug 644452] Re: Atheros AR928X not connecting on wireless HP G60-468CA 

INF category management usually provides pointers on driver modulation... 
was just an idea. 


On Tue, Oct 12, 2010 at 8:54 AM, Daniel Cardin 
<email address hidden>wrote: 

> Why would I do that ? The driver works just fine. I have been using it 
> all day with wicd. 
> 
> It's only the killswitch status that prevents network-manager from doing 
> its job. If there were 
> an option to diregard the status, it would work :) 
> 
> 
> De: "Cypher2" <email address hidden> 
> À: "Daniel Cardin" <email address hidden> 
> Envoyé: Mardi 12 Octobre 2010 08:40:06 
> Objet: Re: [Bug 644452] Re: Atheros AR928X not connecting on wireless HP 
> G60-468CA 
> 
> Could you verify if ndisgtk/ndiswrapper INF bypass works? Use modprobe to 
> list active driver module and blacklist it. 
> On 11 Oct 2010 15:06, "Daniel Cardin" <email address hidden> wrote: 
> > I have a fresh install of 10.10 and I am experimenting the disabled 
> wireless problem as well. 
> > But, on my Dell Vostro 1720, I cannot change the state of the rfkill 
> using 
> unblock all. It remains blocked. 
> > 
> > On the other hand, the wireless IS working as using wicd works just 
> > fine, where NM fails. 
> > 
> > sudo ifconfig eth1 up does not report any error works 
> > 
> > daniel@daniel-Vostro-1720:~$ rfkill list 
> > 0: hci0: Bluetooth 
> > Soft blocked: no 
> > Hard blocked: no 
> > 1: dell-wifi: Wireless LAN 
> > Soft blocked: yes 
> > Hard blocked: yes 
> > 2: dell-bluetooth: Bluetooth 
> > Soft blocked: no 
> > Hard blocked: no 
> > 
> > No change after sudo rfkill unblock all 
> > 
> > The chip is a broadcom 4322, but this seems unrelated. Looks like an 
> > interaction with the BIOS killswitch info. There was a similar bug which 
> > affected Dell laptops that was raised against Lucid : bug #430809 
> > 
> > -- 
> > Atheros AR928X not connecting on wireless HP G60-468CA 
> > https://bugs.launchpad.net/bugs/644452 
> > You received this bug notification because you are a direct subscriber 
> > of the bug. 
> > 
> > Status in “linux” package in Ubuntu: New 
> > 
> > Bug description: 
> > Hello, 
> > 
> > this bug concerns my HP G60-468CA laptop. Since testing maverick amd64, 
> the wireless button switch stays orange and refuses to turn blue to 
> activate, and the wireless acess is greyed out on both gnome and KDE 
> (Ubuntu 
> and Kubuntu respectively) running on the latest 2.6.35 kernel. Installing 
> the latest mainline kernal hangs on boot for all GRUB options (2.6.36-rc4) 
> and renders sytem unusable. 
> > 
> > All terminal configs failed to make this work (lspci and modprobe say 
> that 
> ath9k is in use and hardware is running and present... 
> > 
> > Lucid lynx worked flawlessly.. I even popped the wireless hatch open to 
> manually remove the wireless card and verify output again... 
> > 
> > Please help! 
> > 
> > (It might be a duplicate since the report failed on timeout on my last 
> attempt to submit) 
> > 
> > 
> > Output: 
> > 
> > nathanel@Solace:~$ lspci -vnvn 
> > 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] 
> Memory 
> Controller [10de:0754] (rev a2) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 
> > Capabilities: <access denied> 
> > 
> > 00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 
> > Region 0: I/O ports at 1a00 [size=256] 
> > 
> > 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus 
> [10de:0752] (rev a1) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Interrupt: pin A routed to IRQ 10 
> > Region 0: I/O ports at 3080 [size=64] 
> > Region 4: I/O ports at 3040 [size=64] 
> > Region 5: I/O ports at 3000 [size=64] 
> > Capabilities: <access denied> 
> > Kernel driver in use: nForce2_smbus 
> > Kernel modules: i2c-nforce2 
> > 
> > 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] 
> Co-Processor [10de:0753] (rev a2) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (750ns min, 250ns max) 
> > Interrupt: pin B routed to IRQ 11 
> > Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=512K] 
> > 
> > 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] 
> Memory 
> Controller [10de:0568] (rev a1) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+ 
> > Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > 
> > 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI]) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (750ns min, 250ns max) 
> > Interrupt: pin A routed to IRQ 17 
> > Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K] 
> > Capabilities: <access denied> 
> > Kernel driver in use: ohci_hcd 
> > 
> > 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI]) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (750ns min, 250ns max) 
> > Interrupt: pin B routed to IRQ 17 
> > Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=256] 
> > Capabilities: <access denied> 
> > Kernel driver in use: ehci_hcd 
> > 
> > 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI]) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (750ns min, 250ns max) 
> > Interrupt: pin A routed to IRQ 16 
> > Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K] 
> > Capabilities: <access denied> 
> > Kernel driver in use: ohci_hcd 
> > 
> > 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI]) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (750ns min, 250ns max) 
> > Interrupt: pin B routed to IRQ 16 
> > Region 0: Memory at c0007400 (32-bit, non-prefetchable) [size=256] 
> > Capabilities: <access denied> 
> > Kernel driver in use: ehci_hcd 
> > 
> > 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] 
> IDE 
> [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP]) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx+ 
> > Latency: 0 (750ns min, 250ns max) 
> > Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
> [size=8] 
> > Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
> [size=1] 
> > Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
> [size=8] 
> > Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
> [size=1] 
> > Region 4: I/O ports at 30c0 [size=16] 
> > Capabilities: <access denied> 
> > Kernel driver in use: pata_amd 
> > Kernel modules: pata_amd 
> > 
> > 00:07.0 Audio device [0403]: nVidia Corporation 
> MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (500ns min, 1250ns max) 
> > Interrupt: pin A routed to IRQ 19 
> > Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K] 
> > Capabilities: <access denied> 
> > Kernel driver in use: HDA Intel 
> > Kernel modules: snd-hda-intel 
> > 
> > 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI 
> Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode]) 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 
> > Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 
> > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR- 
> > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 
> > PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- 
> > Capabilities: <access denied> 
> > 
> > 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] 
> SATA Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master 
> SecO PriO]) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+ 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (750ns min, 250ns max) 
> > Interrupt: pin A routed to IRQ 41 
> > Region 0: I/O ports at 30f0 [size=8] 
> > Region 1: I/O ports at 30e4 [size=4] 
> > Region 2: I/O ports at 30e8 [size=8] 
> > Region 3: I/O ports at 30e0 [size=4] 
> > Region 4: I/O ports at 30d0 [size=16] 
> > Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=8K] 
> > Capabilities: <access denied> 
> > Kernel driver in use: ahci 
> > Kernel modules: ahci 
> > 
> > 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet 
> [10de:0760] (rev a2) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+ 
> > Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 (250ns min, 5000ns max) 
> > Interrupt: pin A routed to IRQ 42 
> > Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K] 
> > Region 1: I/O ports at 30f8 [size=8] 
> > Region 2: Memory at c0007c00 (32-bit, non-prefetchable) [size=256] 
> > Region 3: Memory at c0007800 (32-bit, non-prefetchable) [size=16] 
> > Capabilities: <access denied> 
> > Kernel driver in use: forcedeth 
> > Kernel modules: forcedeth 
> > 
> > 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI 
> Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode]) 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 
> > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 
> > I/O behind bridge: 00004000-00004fff 
> > Memory behind bridge: c1000000-c1ffffff 
> > Prefetchable memory behind bridge: 00000000c4000000-00000000dfffffff 
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- <SERR- <PERR- 
> > BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 
> > Capabilities: <access denied> 
> > Kernel modules: shpchp 
> > 
> > 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI 
> Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+ 
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 
> > Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 
> > Memory behind bridge: c2000000-c20fffff 
> > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort+ <SERR- <PERR- 
> > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 
> > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 
> > Capabilities: <access denied> 
> > Kernel driver in use: pcieport 
> > Kernel modules: shpchp 
> > 
> > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor HyperTransport Configuration [1022:1300] (rev 40) 
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Capabilities: <access denied> 
> > 
> > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor Address Map [1022:1301] 
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > 
> > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor DRAM Controller [1022:1302] 
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Kernel modules: amd64_edac_mod 
> > 
> > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor Miscellaneous Control [1022:1303] 
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Capabilities: <access denied> 
> > Kernel driver in use: k10temp 
> > Kernel modules: k10temp 
> > 
> > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor Link Control [1022:1304] 
> > Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> > Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > 
> > 02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 
> 8200M G] [10de:0845] (rev a2) (prog-if 00 [VGA controller]) 
> > Subsystem: Hewlett-Packard Company Device [103c:360a] 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0 
> > Interrupt: pin A routed to IRQ 20 
> > Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M] 
> > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] 
> > Region 3: Memory at c4000000 (64-bit, prefetchable) [size=32M] 
> > Region 5: I/O ports at 4000 [size=128] 
> > [virtual] Expansion ROM at c6000000 [disabled] [size=128K] 
> > Capabilities: <access denied> 
> > Kernel driver in use: nouveau 
> > Kernel modules: nouveau, nvidiafb 
> > 
> > 07:00.0 Network controller [0280]: Atheros Communications Inc. AR928X 
> Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) 
> > Subsystem: Hewlett-Packard Company Device [103c:1381] 
> > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
> <MAbort- >SERR- <PERR- INTx- 
> > Latency: 0, Cache Line Size: 64 bytes 
> > Interrupt: pin A routed to IRQ 23 
> > Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=64K] 
> > Capabilities: <access denied> 
> > Kernel driver in use: ath9k 
> > Kernel modules: ath9k 
> > 
> > ProblemType: Bug 
> > DistroRelease: Ubuntu 10.10 
> > Package: linux-image-2.6.35-22-generic 2.6.35-22.33 
> > Regression: Yes 
> > Reproducible: No 
> > ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 
> > Uname: Linux 2.6.35-22-generic x86_64 
> > AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. 
> > Architecture: amd64 
> > ArecordDevices: 
> > **** List of CAPTURE Hardware Devices **** 
> > card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] 
> > Subdevices: 1/1 
> > Subdevice #0: subdevice #0 
> > AudioDevicesInUse: 
> > USER PID ACCESS COMMAND 
> > /dev/snd/controlC0: ubuntu 4436 F.... pulseaudio 
> > CRDA: Error: [Errno 2] No such file or directory 
> > Card0.Amixer.info: 
> > Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19' 
> > Mixer name : 'Nvidia MCP77/78 HDMI' 
> > Components : 'HDA:14f15051,103c360a,00100000 
> HDA:10de0002,10de0101,00100000' 
> > Controls : 18 
> > Simple ctrls : 8 
> > Date: Tue Sep 21 15:08:44 2010 
> > Frequency: Once a day. 
> > LiveMediaBuild: Kubuntu 10.10 "Maverick Meerkat" - Alpha amd64 (20100920) 
> > MachineType: Hewlett-Packard HP G60 Notebook PC 
> > ProcCmdLine: noprompt cdrom-detect/try-usb=true 
> file=/cdrom/preseed/khostname.seed boot=casper maybe-ubiquity 
> initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz 
> > ProcEnviron: 
> > LANGUAGE= 
> > LANG=en_US.UTF-8 
> > SHELL=/bin/bash 
> > RelatedPackageVersions: linux-firmware 1.38 
> > SourcePackage: linux 
> > dmi.bios.date: 08/18/2009 
> > dmi.bios.vendor: Hewlett-Packard 
> > dmi.bios.version: F.54 
> > dmi.board.name: 303C 
> > dmi.board.vendor: Wistron 
> > dmi.board.version: 08.60 
> > dmi.chassis.type: 10 
> > dmi.chassis.vendor: Wistron 
> > dmi.chassis.version: N/A 
> > dmi.modalias: 
> 
> dmi:bvnHewlett-Packard:bvrF.54:bd08/18/2009:svnHewlett-Packard:pnHPG60NotebookPC:pvrF.54:rvnWistron:rn303C:rvr08.60:cvnWistron:ct10:cvrN/A: 
> > dmi.product.name: HP G60 Notebook PC 
> > dmi.product.version: F.54 
> > dmi.sys.vendor: Hewlett-Packard 
> > 
> > To unsubscribe from this bug, go to: 
> > https://bugs.launchpad.net/ubuntu/+source/linux/+bug/644452/+subscribe 
> 
> -- 
> Atheros AR928X not connecting on wireless HP G60-468CA 
> https://bugs.launchpad.net/bugs/644452 
> You received this bug notification because you are a direct subscriber 
> of the bug. 
> 
> -- 
> Atheros AR928X not connecting on wireless HP G60-468CA 
> https://bugs.launchpad.net/bugs/644452 
> You received this bug notification because you are a direct subscriber 
> of the bug. 
> 
> Status in “linux” package in Ubuntu: New 
> 
> Bug description: 
> Hello, 
> 
> this bug concerns my HP G60-468CA laptop. Since testing maverick amd64, the 
> wireless button switch stays orange and refuses to turn blue to activate, 
> and the wireless acess is greyed out on both gnome and KDE (Ubuntu and 
> Kubuntu respectively) running on the latest 2.6.35 kernel. Installing the 
> latest mainline kernal hangs on boot for all GRUB options (2.6.36-rc4) and 
> renders sytem unusable. 
> 
> All terminal configs failed to make this work (lspci and modprobe say that 
> ath9k is in use and hardware is running and present... 
> 
> Lucid lynx worked flawlessly.. I even popped the wireless hatch open to 
> manually remove the wireless card and verify output again... 
> 
> Please help! 
> 
> (It might be a duplicate since the report failed on timeout on my last 
> attempt to submit) 
> 
> 
> Output: 
> 
> nathanel@Solace:~$ lspci -vnvn 
> 00:00.0 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory 
> Controller [10de:0754] (rev a2) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 
> Capabilities: <access denied> 
> 
> 00:01.0 ISA bridge [0601]: nVidia Corporation Device [10de:075e] (rev a2) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 
> Region 0: I/O ports at 1a00 [size=256] 
> 
> 00:01.1 SMBus [0c05]: nVidia Corporation MCP78S [GeForce 8200] SMBus 
> [10de:0752] (rev a1) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Interrupt: pin A routed to IRQ 10 
> Region 0: I/O ports at 3080 [size=64] 
> Region 4: I/O ports at 3040 [size=64] 
> Region 5: I/O ports at 3000 [size=64] 
> Capabilities: <access denied> 
> Kernel driver in use: nForce2_smbus 
> Kernel modules: i2c-nforce2 
> 
> 00:01.3 Co-processor [0b40]: nVidia Corporation MCP78S [GeForce 8200] 
> Co-Processor [10de:0753] (rev a2) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (750ns min, 250ns max) 
> Interrupt: pin B routed to IRQ 11 
> Region 0: Memory at c0080000 (32-bit, non-prefetchable) [size=512K] 
> 
> 00:01.4 RAM memory [0500]: nVidia Corporation MCP78S [GeForce 8200] Memory 
> Controller [10de:0568] (rev a1) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+ 
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> 
> 00:02.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> OHCI USB 1.1 Controller [10de:077b] (rev a1) (prog-if 10 [OHCI]) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (750ns min, 250ns max) 
> Interrupt: pin A routed to IRQ 17 
> Region 0: Memory at c0006000 (32-bit, non-prefetchable) [size=4K] 
> Capabilities: <access denied> 
> Kernel driver in use: ohci_hcd 
> 
> 00:02.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> EHCI USB 2.0 Controller [10de:077c] (rev a1) (prog-if 20 [EHCI]) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (750ns min, 250ns max) 
> Interrupt: pin B routed to IRQ 17 
> Region 0: Memory at c0007000 (32-bit, non-prefetchable) [size=256] 
> Capabilities: <access denied> 
> Kernel driver in use: ehci_hcd 
> 
> 00:04.0 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> OHCI USB 1.1 Controller [10de:077d] (rev a1) (prog-if 10 [OHCI]) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (750ns min, 250ns max) 
> Interrupt: pin A routed to IRQ 16 
> Region 0: Memory at c0008000 (32-bit, non-prefetchable) [size=4K] 
> Capabilities: <access denied> 
> Kernel driver in use: ohci_hcd 
> 
> 00:04.1 USB Controller [0c03]: nVidia Corporation MCP78S [GeForce 8200] 
> EHCI USB 2.0 Controller [10de:077e] (rev a1) (prog-if 20 [EHCI]) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (750ns min, 250ns max) 
> Interrupt: pin B routed to IRQ 16 
> Region 0: Memory at c0007400 (32-bit, non-prefetchable) [size=256] 
> Capabilities: <access denied> 
> Kernel driver in use: ehci_hcd 
> 
> 00:06.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] IDE 
> [10de:0759] (rev a1) (prog-if 8a [Master SecP PriP]) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx+ 
> Latency: 0 (750ns min, 250ns max) 
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
> [size=8] 
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
> [size=1] 
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
> [size=8] 
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
> [size=1] 
> Region 4: I/O ports at 30c0 [size=16] 
> Capabilities: <access denied> 
> Kernel driver in use: pata_amd 
> Kernel modules: pata_amd 
> 
> 00:07.0 Audio device [0403]: nVidia Corporation 
> MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio [10de:0774] (rev a1) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (500ns min, 1250ns max) 
> Interrupt: pin A routed to IRQ 19 
> Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16K] 
> Capabilities: <access denied> 
> Kernel driver in use: HDA Intel 
> Kernel modules: snd-hda-intel 
> 
> 00:08.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI 
> Bridge [10de:075a] (rev a1) (prog-if 01 [Subtractive decode]) 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR- 
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 
> PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- 
> Capabilities: <access denied> 
> 
> 00:09.0 IDE interface [0101]: nVidia Corporation MCP78S [GeForce 8200] SATA 
> Controller (non-AHCI mode) [10de:0ad0] (rev a2) (prog-if 85 [Master SecO 
> PriO]) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+ 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (750ns min, 250ns max) 
> Interrupt: pin A routed to IRQ 41 
> Region 0: I/O ports at 30f0 [size=8] 
> Region 1: I/O ports at 30e4 [size=4] 
> Region 2: I/O ports at 30e8 [size=8] 
> Region 3: I/O ports at 30e0 [size=4] 
> Region 4: I/O ports at 30d0 [size=16] 
> Region 5: Memory at c0004000 (32-bit, non-prefetchable) [size=8K] 
> Capabilities: <access denied> 
> Kernel driver in use: ahci 
> Kernel modules: ahci 
> 
> 00:0a.0 Ethernet controller [0200]: nVidia Corporation MCP77 Ethernet 
> [10de:0760] (rev a2) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx+ 
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 (250ns min, 5000ns max) 
> Interrupt: pin A routed to IRQ 42 
> Region 0: Memory at c0009000 (32-bit, non-prefetchable) [size=4K] 
> Region 1: I/O ports at 30f8 [size=8] 
> Region 2: Memory at c0007c00 (32-bit, non-prefetchable) [size=256] 
> Region 3: Memory at c0007800 (32-bit, non-prefetchable) [size=16] 
> Capabilities: <access denied> 
> Kernel driver in use: forcedeth 
> Kernel modules: forcedeth 
> 
> 00:0b.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI 
> Express Bridge [10de:0569] (rev a1) (prog-if 00 [Normal decode]) 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 
> I/O behind bridge: 00004000-00004fff 
> Memory behind bridge: c1000000-c1ffffff 
> Prefetchable memory behind bridge: 00000000c4000000-00000000dfffffff 
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- <SERR- <PERR- 
> BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- 
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 
> Capabilities: <access denied> 
> Kernel modules: shpchp 
> 
> 00:14.0 PCI bridge [0604]: nVidia Corporation MCP78S [GeForce 8200] PCI 
> Bridge [10de:077a] (rev a1) (prog-if 00 [Normal decode]) 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx+ 
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 
> Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 
> Memory behind bridge: c2000000-c20fffff 
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort+ <SERR- <PERR- 
> BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- 
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 
> Capabilities: <access denied> 
> Kernel driver in use: pcieport 
> Kernel modules: shpchp 
> 
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor HyperTransport Configuration [1022:1300] (rev 40) 
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Capabilities: <access denied> 
> 
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor Address Map [1022:1301] 
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> 
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor DRAM Controller [1022:1302] 
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Kernel modules: amd64_edac_mod 
> 
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor Miscellaneous Control [1022:1303] 
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Capabilities: <access denied> 
> Kernel driver in use: k10temp 
> Kernel modules: k10temp 
> 
> 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 11h 
> Processor Link Control [1022:1304] 
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx- 
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> 
> 02:00.0 VGA compatible controller [0300]: nVidia Corporation C77 [GeForce 
> 8200M G] [10de:0845] (rev a2) (prog-if 00 [VGA controller]) 
> Subsystem: Hewlett-Packard Company Device [103c:360a] 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0 
> Interrupt: pin A routed to IRQ 20 
> Region 0: Memory at c1000000 (32-bit, non-prefetchable) [size=16M] 
> Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] 
> Region 3: Memory at c4000000 (64-bit, prefetchable) [size=32M] 
> Region 5: I/O ports at 4000 [size=128] 
> [virtual] Expansion ROM at c6000000 [disabled] [size=128K] 
> Capabilities: <access denied> 
> Kernel driver in use: nouveau 
> Kernel modules: nouveau, nvidiafb 
> 
> 07:00.0 Network controller [0280]: Atheros Communications Inc. AR928X 
> Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) 
> Subsystem: Hewlett-Packard Company Device [103c:1381] 
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx- 
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx- 
> Latency: 0, Cache Line Size: 64 bytes 
> Interrupt: pin A routed to IRQ 23 
> Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=64K] 
> Capabilities: <access denied> 
> Kernel driver in use: ath9k 
> Kernel modules: ath9k 
> 
> ProblemType: Bug 
> DistroRelease: Ubuntu 10.10 
> Package: linux-image-2.6.35-22-generic 2.6.35-22.33 
> Regression: Yes 
> Reproducible: No 
> ProcVersionSignature: Ubuntu 2.6.35-22.33-generic 2.6.35.4 
> Uname: Linux 2.6.35-22-generic x86_64 
> AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23. 
> Architecture: amd64 
> ArecordDevices: 
> **** List of CAPTURE Hardware Devices **** 
> card 0: NVidia [HDA NVidia], device 0: CONEXANT Analog [CONEXANT Analog] 
> Subdevices: 1/1 
> Subdevice #0: subdevice #0 
> AudioDevicesInUse: 
> USER PID ACCESS COMMAND 
> /dev/snd/controlC0: ubuntu 4436 F.... pulseaudio 
> CRDA: Error: [Errno 2] No such file or directory 
> Card0.Amixer.info: 
> Card hw:0 'NVidia'/'HDA NVidia at 0xc0000000 irq 19' 
> Mixer name : 'Nvidia MCP77/78 HDMI' 
> Components : 'HDA:14f15051,103c360a,00100000 
> HDA:10de0002,10de0101,00100000' 
> Controls : 18 
> Simple ctrls : 8 
> Date: Tue Sep 21 15:08:44 2010 
> Frequency: Once a day. 
> LiveMediaBuild: Kubuntu 10.10 "Maverick Meerkat" - Alpha amd64 (20100920) 
> MachineType: Hewlett-Packard HP G60 Notebook PC 
> ProcCmdLine: noprompt cdrom-detect/try-usb=true 
> file=/cdrom/preseed/khostname.seed boot=casper maybe-ubiquity 
> initrd=/casper/initrd.lz quiet splash -- BOOT_IMAGE=/casper/vmlinuz 
> ProcEnviron: 
> LANGUAGE= 
> LANG=en_US.UTF-8 
> SHELL=/bin/bash 
> RelatedPackageVersions: linux-firmware 1.38 
> SourcePackage: linux 
> dmi.bios.date: 08/18/2009 
> dmi.bios.vendor: Hewlett-Packard 
> dmi.bios.version: F.54 
> dmi.board.name: 303C 
> dmi.board.vendor: Wistron 
> dmi.board.version: 08.60 
> dmi.chassis.type: 10 
> dmi.chassis.vendor: Wistron 
> dmi.chassis.version: N/A 
> dmi.modalias: 
> dmi:bvnHewlett-Packard:bvrF.54:bd08/18/2009:svnHewlett-Packard:pnHPG60NotebookPC:pvrF.54:rvnWistron:rn303C:rvr08.60:cvnWistron:ct10:cvrN/A: 
> dmi.product.name: HP G60 Notebook PC 
> dmi.product.version: F.54 
> dmi.sys.vendor: Hewlett-Packard 
> 
> To unsubscribe from this bug, go to: 
> https://bugs.launchpad.net/ubuntu/+source/linux/+bug/644452/+subscribe 
> 

-- 
Atheros AR928X not connecting on wireless HP G60-468CA 
https://bugs.launchpad.net/bugs/644452 
You received this bug notification because you are a direct subscriber 
of the bug.