WARNING: at fs/proc/generic.c:317 __xlate_proc_name+0xbb/0xd0()

Bug #722006 reported by unicorp99
8
This bug affects 1 person
Affects Status Importance Assigned to Milestone
linux (Ubuntu)
Expired
Undecided
Unassigned

Bug Description

Binary package hint: linux-image-2.6.38-4-generic-pae

from 2.6.34 kernel to 2.6.38 error

[ 16.676353] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
[ 17.158178] flexcop-pci: will use the HW PID filter.
[ 17.158192] flexcop-pci: card revision 2
[ 17.158381] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 17.158390] alloc irq_desc for 16 on node -1
[ 17.158392] alloc kstat_irqs on node -1
[ 17.158401] b2c2_flexcop_pci 0000:02:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[ 17.158448] ------------[ cut here ]------------
[ 17.158458] WARNING: at fs/proc/generic.c:317 __xlate_proc_name+0xbb/0xd0()
[ 17.158464] Hardware name:
[ 17.158467] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver'
[ 17.158472] Modules linked in: b2c2_flexcop_pci(+) saa7146 ac97_bus b2c2_flexcop videobuf_dma_sg snd_seq snd_rawmidi snd_pcm dvb_core cx24123 snd_seq_device tpm_tis amd64_agp sn
d_timer ns558 cx24113 parport_pc videobuf_core tpm i2c_nforce2 s5h1420 snd ttpci_eeprom tpm_bios agpgart k8temp snd_page_alloc gameport pcspkr serio_raw parport soundcore shpchp ra
id10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 multipath linear sata_nv floppy forcedeth pata_amd [last unloaded: scsi_wait_scan]
[ 17.158533] Pid: 664, comm: modprobe Not tainted 2.6.34.8 #1
[ 17.158538] Call Trace:
[ 17.158546] [<c01527f2>] warn_slowpath_common+0x72/0xa0
[ 17.158552] [<c025c6fb>] ? __xlate_proc_name+0xbb/0xd0
[ 17.158558] [<c025c6fb>] ? __xlate_proc_name+0xbb/0xd0
[ 17.158563] [<c015286b>] warn_slowpath_fmt+0x2b/0x30
[ 17.158569] [<c025c6fb>] __xlate_proc_name+0xbb/0xd0
[ 17.158574] [<c025ce01>] __proc_create+0x61/0x110
[ 17.158580] [<c025d126>] proc_mkdir_mode+0x26/0x60
[ 17.158585] [<c025d174>] proc_mkdir+0x14/0x20
[ 17.158591] [<c01a9ddb>] register_handler_proc+0xeb/0x110
[ 17.158599] [<c01a7ff7>] __setup_irq+0x1a7/0x300
[ 17.158606] [<c0209094>] ? kmem_cache_alloc_notrace+0x84/0xc0
[ 17.158612] [<c01a81d0>] ? request_threaded_irq+0x80/0x1a0
[ 17.158621] [<efee1150>] ? flexcop_pci_isr+0x0/0x140 [b2c2_flexcop_pci]
[ 17.158627] [<c01a822d>] request_threaded_irq+0xdd/0x1a0
[ 17.158634] [<c0352e87>] ? pci_iomap+0xf7/0x100
[ 17.158641] [<c0352e87>] ? pci_iomap+0xf7/0x100
[ 17.158648] [<efee13f8>] flexcop_pci_probe+0x168/0x2c0 [b2c2_flexcop_pci]
[ 17.158656] [<c0361e1e>] pci_device_probe+0x5e/0x80
[ 17.158663] [<c03f97cf>] driver_probe_device+0x7f/0x180
[ 17.158668] [<c03f9951>] __driver_attach+0x81/0x90
[ 17.158673] [<c03f98d0>] ? __driver_attach+0x0/0x90
[ 17.158679] [<c03f89a8>] bus_for_each_dev+0x48/0x70
[ 17.158684] [<c03f950e>] driver_attach+0x1e/0x20
[ 17.158689] [<c03f98d0>] ? __driver_attach+0x0/0x90
[ 17.158694] [<c03f90c2>] bus_add_driver+0xc2/0x2c0
[ 17.158700] [<c03617d0>] ? pci_device_remove+0x0/0x40
[ 17.158705] [<c03f9b96>] driver_register+0x66/0x110
[ 17.158711] [<c0361875>] __pci_register_driver+0x45/0xb0
[ 17.158718] [<efee4017>] flexcop_pci_module_init+0x17/0x19 [b2c2_flexcop_pci]
[ 17.158726] [<c0103152>] do_one_initcall+0x32/0x1a0
[ 17.158732] [<efee4000>] ? flexcop_pci_module_init+0x0/0x19 [b2c2_flexcop_pci]
[ 17.158740] [<c018877d>] sys_init_module+0xad/0x210
[ 17.158747] [<c0213175>] ? sys_close+0x75/0xd0
[ 17.158752] [<c010935f>] sysenter_do_call+0x12/0x28
[ 17.158757] ---[ end trace 3f534881a94cdd77 ]---
[ 17.172098] DVB: registering new adapter (FlexCop Digital TV device)
[ 17.179408] b2c2-flexcop: MAC address = 00:d0:d7:0f:fc:e5
[ 17.180039] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[ 17.180047] CX24123: wrong demod revision: 87
[ 17.786939] Linux video capture interface: v2.00

in 2.6.32 and 2.6.33 kernel all OK

cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem root=UUID=cb35bfde-ff44-4353-a3f8-4996abc1739f ro lapic acpi=force vmalloc=256MB acpi_enforce_resources=lax

error is with null cmdline and is with this cmdline lapic acpi=force vmalloc=256MB acpi_enforce_resources=lax

from kernel 2.6.37 to 2.6.38 system is hang, from 2.6.34 to 2.6.35 only report error in dmesg, 2.6.32-2.6.33 work nomally

Core2Duo machine only for send error.

ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: linux-image-2.6.38-4-generic-pae 2.6.38-4.31
Regression: Yes
Reproducible: Yes
ProcVersionSignature: Ubuntu 2.6.37-12.26-generic-pae 2.6.37
Uname: Linux 2.6.37-12-generic-pae i686
AcpiTables:
 Error: command ['kdesudo', '--', '/usr/share/apport/dump_acpi_tables.py'] failed with exit code 1: QInotifyFileSystemWatcherEngine::addPaths: inotify_add_watch failed: No such file or directory
 QFileSystemWatcher: failed to add paths: /home/hub2/.config/ibus/bus
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
Architecture: i386
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: hub2 2221 F.... pulseaudio
 /dev/snd/pcmC0D0p: hub2 2221 F...m pulseaudio
CRDA: Error: [Errno 2] Нет такого файла или каталога
Card0.Amixer.info:
 Card hw:0 'Intel'/'HDA Intel at 0xf9ffc000 irq 41'
   Mixer name : 'Realtek ALC662 rev1'
   Components : 'HDA:10ec0662,10438290,00100101'
   Controls : 34
   Simple ctrls : 18
Date: Sun Feb 20 06:54:19 2011
HibernationDevice: RESUME=UUID=2047c0fa-229d-40c1-ad4d-88276f5f7f93
InstallationMedia: Kubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007)
Lsusb:
 Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
MachineType: System manufacturer System Product Name
ProcEnviron:
 LANGUAGE=
 LANG=ru_RU.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.37-12-generic-pae root=UUID=278076d0-19b2-4ef1-9a89-f478818c8594 ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-2.6.37-12-generic-pae N/A
 linux-backports-modules-2.6.37-12-generic-pae N/A
 linux-firmware 1.47
RfKill:

SourcePackage: linux
WifiSyslog:

dmi.bios.date: 07/28/2008
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 0904
dmi.board.asset.tag: To Be Filled By O.E.M.
dmi.board.name: P5KPL-VM
dmi.board.vendor: ASUSTeK Computer INC.
dmi.board.version: x.xx
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr0904:bd07/28/2008:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKComputerINC.:rnP5KPL-VM:rvrx.xx:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer

Revision history for this message
unicorp99 (unicorp99) wrote :
Revision history for this message
unicorp99 (unicorp99) wrote :

low log from other machine (not with dvb SkyStar2 and SkyStar1 cards, on error machine work debian 6. kernel 2.6.38-4-generic-pae from ubuntu on debian machine too error

SkyStar1 card work in all systems and kernels normally...

Revision history for this message
unicorp99 (unicorp99) wrote :

dmesg 2.6.34.8 kernel from AMD machine with SkyStar2 cards module b2c2_flexcop error

Revision history for this message
unicorp99 (unicorp99) wrote :

dmesg from 2.6.35-27-generic-pae kernel on AMD machine with SkyStar2 DVB card error in module b2c2_flexcop

description: updated
tags: added: regression-release
removed: regression-update
Revision history for this message
unicorp99 (unicorp99) wrote :
Download full text (7.4 KiB)

in Linux version 2.6.38-1-686-bigmem (Debian 2.6.38-1) error too

Mar 19 04:14:50 br06 kernel: [ 10.626901] b2c2_flexcop_pci 0000:02:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
Mar 19 04:14:50 br06 kernel: [ 10.626974] ------------[ cut here ]------------
Mar 19 04:14:50 br06 kernel: [ 10.626984] WARNING: at /build/buildd-linux-2.6_2.6.38-1-i386-d1S5Sz/linux-2.6-2.6.38/debian/build/source_i386_none/fs/proc/generic.c:323 __xlate_pr
oc_name+0x87/0x91()
Mar 19 04:14:50 br06 kernel: [ 10.626995] Hardware name:
Mar 19 04:14:50 br06 kernel: [ 10.626998] name 'Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver'
Mar 19 04:14:50 br06 kernel: [ 10.627003] Modules linked in: b2c2_flexcop_pci(+) snd_seq videobuf_dma_sg videobuf_core ttpci_eeprom b2c2_flexcop dvb_core cx24123 cx24113 snd_time
r snd_seq_device snd s5h1420 tpm_tis i2c_nforce2 i2c_core shpchp tpm snd_page_alloc pci_hotplug k8temp tpm_bios evdev pcspkr soundcore ns558 parport_pc gameport serio_raw parport b
utton processor ext4 mbcache jbd2 crc16 raid10 raid456 async_raid6_recov async_pq raid6_pq async_xor xor async_memcpy async_tx raid1 raid0 multipath linear md_mod sd_mod crc_t10dif
 ata_generic sata_nv pata_amd libata ohci_hcd ehci_hcd scsi_mod usbcore fan thermal floppy forcedeth thermal_sys nls_base [last unloaded: scsi_wait_scan]
Mar 19 04:14:50 br06 kernel: [ 10.627076] Pid: 562, comm: modprobe Not tainted 2.6.38-1-686-bigmem #1
Mar 19 04:14:50 br06 kernel: [ 10.627081] Call Trace:
Mar 19 04:14:50 br06 kernel: [ 10.627089] [<c1036bc1>] ? warn_slowpath_common+0x6a/0x7b
Mar 19 04:14:50 br06 kernel: [ 10.627095] [<c10fc582>] ? __xlate_proc_name+0x87/0x91
Mar 19 04:14:50 br06 kernel: [ 10.627101] [<c1036c38>] ? warn_slowpath_fmt+0x28/0x2c
Mar 19 04:14:50 br06 kernel: [ 10.627107] [<c10fc582>] ? __xlate_proc_name+0x87/0x91
Mar 19 04:14:50 br06 kernel: [ 10.627113] [<c10fc91c>] ? __proc_create+0x46/0xe3
Mar 19 04:14:50 br06 kernel: [ 10.627118] [<c10fcfa3>]...

Read more...

Brad Figg (brad-figg)
Changed in linux (Ubuntu):
status: New → Confirmed
Revision history for this message
unicorp99 (unicorp99) wrote :

on 2.6.39 this bug corrected, SkyStar2 work normally.

this bug may be close?

penalvch (penalvch)
summary: - error in b2c2_flexcop module
+ WARNING: at fs/proc/generic.c:317 __xlate_proc_name+0xbb/0xd0()
penalvch (penalvch)
description: updated
Revision history for this message
penalvch (penalvch) wrote :

unicorp99, thank you for reporting this and helping make Ubuntu better. This bug was reported a while ago and there hasn't been any activity in it recently. We were wondering if this is still an issue? Can you try with the latest development release of Ubuntu? ISO CD images are available from http://cdimage.ubuntu.com/releases/ .

If it remains an issue, could you run the following command in the development release from a Terminal (Applications->Accessories->Terminal). It will automatically gather and attach updated debug information to this report.

apport-collect -p linux <replace-with-bug-number>

Also, if you could test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https://wiki.ubuntu.com/KernelMainlineBuilds . Once you've tested the upstream kernel, please remove the 'needs-upstream-testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs-upstream-testing' text.

If this bug is fixed in the mainline kernel, please add the following tag 'kernel-fixed-upstream'.

If the mainline kernel does not fix this bug, please add the tag: 'kernel-bug-exists-upstream'.

If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.

Please let us know your results. Thanks in advance.

Changed in linux (Ubuntu):
status: Confirmed → Incomplete
Revision history for this message
Launchpad Janitor (janitor) wrote :

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]

Changed in linux (Ubuntu):
status: Incomplete → Expired
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.